From 3bddbcdfb0f11fb0f003c3f9f120caef90615326 Mon Sep 17 00:00:00 2001
From: mark <mark>
Date: Mon, 7 Feb 2000 12:00:49 +0000
Subject: [PATCH] Added code and variables to set up the dot11req_start command
 for the AP case.

---
 etc/pcmcia/wlan-ng      | 67 +++++++++++++++++++++++++++++++----------
 etc/pcmcia/wlan-ng.opts | 18 +++++++++--
 2 files changed, 67 insertions(+), 18 deletions(-)

diff --git a/etc/pcmcia/wlan-ng b/etc/pcmcia/wlan-ng
index 738a4e4..d91e62d 100755
--- a/etc/pcmcia/wlan-ng
+++ b/etc/pcmcia/wlan-ng
@@ -6,7 +6,7 @@
 
 . ./shared
 
-# set -x 
+set -x 
 
 # Get device attributes
 get_info $DEVICE
@@ -19,22 +19,48 @@ ADDRESS="$SCHEME,$SOCKET,$INSTANCE,$HWADDR"
 case "$ACTION" in
 
 'start')
+	if ! is_true $WLAN_ENABLE ; then
+		exit 0
+	fi
+
 	if is_true $IS_AP; then
-		prism2dl -r $AP_FWIMAGE
-		wlanctl-ng $DEVICE start \
-			ssid="$CREATE_SSID" \
-			bsstype=infrastrucure \
-			beaconperiod=100 \
-			dtimperiod=3 \
-			cfpollable=false \
-			cfreq=false \
-			dschannel=$CREATE_CHANNEL \
-			basicrate1=2 \
-			basicrate2=4 \
-			operationalrate1=2 \
-			operationalrate2=4 \
-			operationalrate3=11 \
-			operationalrate4=22
+		if ! prism2dl -r $AP_FWIMAGE $DEVICE then ; then
+			echo AP firmware download failed
+			exit 1
+		fi
+		startcmd="wlanctl-ng $DEVICE dot11req_start "
+		startcmd="$startcmd ssid=$CREATE_SSID"
+		startcmd="$startcmd bsstype=infrastructure"
+		startcmd="$startcmd beaconperiod=$APBCNINT" 
+		startcmd="$startcmd dtimperiod=$APDTIMINT"
+		startcmd="$startcmd cfpollable=$APCFPOLLABLE"
+		startcmd="$startcmd cfpollreq=$APCFPOLLREQ"
+		startcmd="$startcmd probedelay=$APPROBEDELAY"
+		startcmd="$startcmd dschannel=$CREATE_CHANNEL"
+		j=1
+		for i in $APBASICRATES ; do
+			startcmd="$startcmd basicrate$j=$i"
+			j=$[j + 1]
+		done
+		j=1
+		for i in $APOPRATES ; do
+			startcmd="$startcmd operationalrate$j=$i"
+			j=$[j + 1]
+		done
+echo $startcmd
+		results=`$startcmd`
+		if [ $? = 0 ]; then 
+			eval $results
+			if [ $resultcode != "success" ] ; then 
+				echo "AP failed to start, resultcode=$resultcode"
+				exit 1
+			else
+				echo "WLAN AP mode started"
+			fi
+		else
+			echo FAILED: $startcmd
+			exit 1
+		fi
 	else
 
 		/sbin/wlanctl-ng $DEVICE dot11req_mibset "mibattribute=dot11DesiredSSID=$DESIRED_SSID"
@@ -44,12 +70,21 @@ case "$ACTION" in
 	# Now initialize the network interface in the normal way
 	./network $1 $2
 
+	if is_true $IS_AP ; then
+		ifconfig $BRIDGEDEVICE promisc
+		ifconfig $DEVICE up
+		brcfg start
+	fi
 	;;
 
 'stop'|'check'|'cksum'|'restart'|'suspend'|'resume')
 
 	# Just handle it the same as any other net device
 	echo calling network script
+	if is_true $IS_AP ; then
+		brcfg stop
+	fi
+
 	./network $1 $2
 	reval=$?
 
diff --git a/etc/pcmcia/wlan-ng.opts b/etc/pcmcia/wlan-ng.opts
index fa2fe27..f074ef6 100755
--- a/etc/pcmcia/wlan-ng.opts
+++ b/etc/pcmcia/wlan-ng.opts
@@ -8,15 +8,29 @@
 
 case "$ADDRESS" in
 *,*,*,*)
+	# Do we want to enable the card at all?  Set to 'n' if you wish
+	#  to load the flash.
+	WLAN_ENABLE=y
+
 	# Do we want to be an AP?
-	IS_AP=n
+	IS_AP=y
 	AP_FWIMAGE=/etc/wlan/t10001c0.hex
+	BRIDGEDEVICE=eth0
+	APSSID="WLAN_PRISM2"
+	APBCNINT=100
+	APDTIMINT=3
+	APCFPOLLABLE=false
+	APCFPOLLREQ=false
+	APPROBEDELAY=100
+	APCHANNEL=6
+	APBASICRATES="2 4"
+	APOPRATES="2 4"
 
 	# Scan for which SSID?
 	DESIRED_SSID="Set your own here"
 
 	# Create SSID
-	CREATE_SSID="SSID to create"
+	CREATE_SSID="WLAN_PRISM2"
 	CREATE_CHANNEL=6
     ;;
 esac