Updated some documentation for the 0.1.5 release.

This commit is contained in:
mark 2000-02-23 20:19:42 +00:00
parent cf5c115b9f
commit a086d6336b
3 changed files with 5 additions and 50 deletions

6
README
View File

@ -83,9 +83,9 @@ Build Instructions:
/etc/rc.d/init.d/pcmcia restart
10) Insert the card. A solid LED indicates that the SSID you specified
was found, a bss was joined, and the firmware completed the authenticate
and associate processes.
10) Insert the card. For most cards, a solid LED indicates that the
SSID you specified was found, a bss was joined, and the firmware
completed the authenticate and associate processes.
11) Run ifconfig and route to determine if your IP and route settings are
listed as you wanted them. It's also a good idea to look at the file

5
TODO
View File

@ -3,7 +3,7 @@
Copyright (C) 1999 AbsoluteValue Software, Inc.
Linux WLAN NG TODO
Mon Feb 7 14:38:48 EST 2000
Wed Feb 23 15:06:05 EST 2000
- Finish the prism2 request responses for STA and AP
Station:
@ -38,8 +38,6 @@ Mon Feb 7 14:38:48 EST 2000
reassociate
- Add event handling scripts for the events above
- Add AP support for power managing stations
- Fix packet loss while sniffing at 11Mb/s
- Add host WEP for Station
- Handle host system suspend/resume
- Improve PCMCIA event scripts
- man pages
@ -50,3 +48,4 @@ Mon Feb 7 14:38:48 EST 2000
- Review 'make config' for additional options and validation
- Move am930 code over to this package
- Add f/w type and version identification for download.
- Study bridge configuration more closely

View File

@ -1,44 +0,0 @@
doc/mysteries.txt
This file contains a log of unanswered questions raised during development
and testing. I just log them here for future reference since these questions
are usually generated while I'm working on something else and can't afford
to stop.
=========================================================================
Sun Feb 6 17:25:35 EST 2000
Conditions:
Any use of the prism2 card.
Observation:
F/W is returning the same FID for both the infofid and the txfid
allocation.
Guesses:
Answer:
=========================================================================
Tue Jan 11 01:25:46 EST 2000
Conditions:
Aironet AP, "Configuration/Radio/I80211/Extend=on".
Extend means "proprietary extensions"
Observation:
Probe response frames were received with a properly formatted information
element using a reserved Element ID (namely 0x85). The data length
of the element was 28 bytes. Turning "Extend" off removed that item
from the probe responses. What is this item, what does it do? The
presence of this item is confusing the prism1 driver a little (non-fatal
error) and confusing wlandump alot. Requires a fix.
=========================================================================
Tue Jan 11 00:03:37 EST 2000
Conditions:
prism2 sta w/ txrates set to all (0x0f), all other settings at default.
Aironet AP set w/ 1_11 supported rates and 1_11 basic rates.
Observation:
Extremely poor tx/rx (particularly rx) and _lots_ of disassociations
initiated by the AP. Changed AP basic rates to 1_2 and the problem goes
away.
Guesses:
prism2 mac can't handle 5.5&11 as basic rates?
aironet was using short preamble?
Answer: