Fixed bugs in top-level Makefile.

This commit is contained in:
joellen 2000-07-03 05:44:54 +00:00
parent d4484f3de0
commit b61c9f7651
14 changed files with 53 additions and 37 deletions

View File

@ -1,5 +1,7 @@
#!/bin/sh
#
# linux-wlan-ng/Configure
#
# Adapted from the pcmcia-cs/Configure file, license statement below:
#
# Configure 1.110 1999/06/24 17:37:36
@ -18,7 +20,6 @@
# <dhinds@hyper.stanford.edu>. Portions created by David A. Hinds
# are Copyright (C) 1998 David A. Hinds. All Rights Reserved.
#-------------------------------------------------------------------------
# linux-wlan-ng/Configure
#
# TODO: Since we're dependent on configured pcmcia source, we should change
# this such that it will ask for the pcmcia source dir and then read
@ -34,7 +35,6 @@ fail ()
exit 1
}
if [ -r config.out ]; then
. ./config.out 2>/dev/null
else
@ -45,8 +45,15 @@ else
. ./config.in
fi
PROMPT=y
if [ $# -gt 0 ] ; then
if [ "$1" = "-d" ] ; then
PROMPT=n
if [ $# -gt 1 -a -r $2 ]; then
. ./$2
fi
fi
fi
arg () {
VALUE="`$ECHO X"$2" | sed -e 's/^X--[a-zA-Z_]*=//'`"
@ -54,7 +61,9 @@ arg () {
}
usage () {
$ECHO "usage: $0 "
echo "usage: Configure [-d <filename>]"
echo ""
echo " -d <filename> read configuration data from file"
exit 1
}
@ -62,7 +71,7 @@ usage () {
CONFIG=config.new
CONFIG_MK=config.mk
rm -f .prereq.ok $CONFIG $CONFIG_MK $MODVER
rm -f $CONFIG $CONFIG_MK $MODVER
cat << 'EOF' > $CONFIG
#
@ -238,10 +247,11 @@ write_str TARGET_INST_EXEDIR
$ECHO ""
SYSV_INIT=n
if [ "$PREFIX" = "" ] ; then
if [ -d /etc/rc.d/init.d -o -d /etc/init.d -o -d /sbin/init.d ] ; then
$ECHO "It looks like you have a System V init file setup."
SYSV_INIT=y
SYSV_INIT=n
if [ -d /etc/rc.d/init.d ] ; then
$ECHO "RC_DIR=/etc/rc.d" >> $CONFIG
$ECHO "RC_DIR=/etc/rc.d" >> $CONFIG_MK
@ -259,7 +269,7 @@ if [ "$PREFIX" = "" ] ; then
"/etc/rc.d/rc.wlan (for ISA/PCMCIA cards)"
$ECHO " so that wlan cards will be started at boot time."
fi
SYSV_INIT=
SYSV_INIT=n
fi
write_bool SYSV_INIT
else
@ -276,7 +286,9 @@ $ECHO ""
#=======================================================================
# Make sure our target architecture is the same as our build architecture.
if [ ! WLAN_INSTALL_TYPE ] ; then
WLAN_INSTALL_TYPE=sta
fi
ask_str "Install drivers as station (sta) or access point (ap)?" WLAN_INSTALL_TYPE
#=======================================================================
@ -326,10 +338,6 @@ ask_bool "Build for Kernel PCMCIA?" WLAN_KERN_PCMCIA
mv $CONFIG config.out
touch .prereq.ok
$ECHO ""
$ECHO "Configuration successful."
$ECHO ""

View File

@ -1,7 +1,9 @@
# Makefile
# linux-wlan Makefile
#
# Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
# --------------------------------------------------------------------
#
# Linux WLAN
# linux-wlan
#
# The contents of this file are subject to the Mozilla Public
# License Version 1.1 (the "License"); you may not use this file
@ -13,10 +15,6 @@
# implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The initial developer of the original code is Mark S. Mathews
# <mark@absoval.com>. Portions created by Mark S. Mathews are
# Copyright (C) 1999 AbsoluteValue Software, Inc. All Rights Reserved.
#
# Alternatively, the contents of this file may be used under the
# terms of the GNU Public License version 2 (the "GPL"), in which
# case the provisions of the GPL are applicable instead of the
@ -30,10 +28,15 @@
#
# --------------------------------------------------------------------
#
# The initial author may be reached as mark@absoval.com, or
# C/O AbsoluteValue Software Inc., P.O. Box 941149,
# Inquiries regarding the linux-wlan Open Source project can be
# made directly to:
#
# AbsoluteValue Systems Inc.
# P.O. Box 941149
# Maitland, FL, 32794-1149
#
# info@linux-wlan.com
# http://www.linux-wlan.com
# --------------------------------------------------------------------
#
# Portions of the development of this software were funded by
@ -46,6 +49,7 @@ DIRS = src doc man etc
help:
@echo "Pick one of the following targets:"
@echo -e "\tmake default_config\t- configure using default config file"
@echo -e "\tmake config\t\t- configure and check system setup"
@echo -e "\tmake all\t\t- build modules and programs"
@echo -e "\tmake install\t\t- install modules and programs"
@ -55,15 +59,20 @@ all:
set -e; for d in $(DIRS); do $(MAKE) -C $$d ; done
clean:
touch config.mk
touch config.mk config.new
set -e; for d in $(DIRS); do $(MAKE) -C $$d clean ; done
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
rm -f config.mk
for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done
rm -f config.mk config.new
install:
set -e; for d in $(DIRS); do $(MAKE) -C $$d install ; done
default_config:
@touch config.mk config.new
@rm -f config.mk config.new
@./Configure -d ../config.all
config:
@touch config.mk
@./Configure

View File

@ -51,5 +51,5 @@ install:
clean:
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done

View File

@ -51,5 +51,5 @@ install:
clean:
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done

View File

@ -59,7 +59,7 @@ all:
clean:
set -e; for d in $(DIRS); do $(MAKE) -C $$d clean ; done
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
set -e; for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
set -e; for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done
install:
set -e; for d in $(DIRS); do $(MAKE) -C $$d install ; done

View File

@ -62,5 +62,5 @@ install:
clean:
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done

View File

@ -66,7 +66,7 @@ all:
clean:
set -e; for d in $(DIRS); do $(MAKE) -C $$d clean ; done
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done
install:
set -e; for d in $(DIRS); do $(MAKE) -C $$d install ; done

View File

@ -87,5 +87,5 @@ install:
clean:
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
rm -f prism2dl
for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done

View File

@ -150,11 +150,10 @@ else
endif
clean:
touch .depend
rm -f .depend.sta_cs .depend.ap_cs
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
rm -fr $(STA_CS_OBJ_DIR) $(AP_CS_OBJ_DIR)
rm -fr $(MODULES)
rm -f .depend .depend.sta_cs .depend.ap_cs
# This probably isn't the best way to handle the dependencies, but it works.

View File

@ -121,6 +121,7 @@ install:
echo "Nothing to do"
clean:
rm -f .depend
rm -f core core.* *.o .*.o *.s *.a *.sort tmp_make *~ tags
rm -fr $(OBJ_DIR)
rm -f mkridlist

View File

@ -62,5 +62,5 @@ install:
clean:
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done

View File

@ -121,11 +121,10 @@ install : $(MODULES)
cp $(SKEL_MODULE) $(TARGET_MODDIR)/pcmcia
clean:
touch .depend
rm -f .depend .depend*
rm -f core core.* *.o .*.o *.s *.a tmp_make *~ tags
rm -fr $(OBJ_DIR)
rm -fr $(MODULES)
rm -f .depend
#
# Include a dependency file (if one exists)

View File

@ -101,5 +101,5 @@ install:
clean:
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
rm -f wlanctl
for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done

View File

@ -99,6 +99,6 @@ install:
clean:
rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags
rm -f wland
for i in *_obj; do if [ -d $i ]; then rm -fr $i; fi; done
for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done