VERY OBSOLETE linux-wlan-ng master repository
Go to file
solomon cf38f98c1f doc updates. 2002-09-29 14:41:26 +00:00
add-ons/keygen Now you can compile this sucker. 2002-05-24 12:11:30 +00:00
doc Documentaion updates. 2002-09-06 01:08:27 +00:00
etc card ident. 2002-09-11 18:20:52 +00:00
man Changed the comment header at the top of all the files to reflect the new company name. 2000-07-05 04:57:04 +00:00
scripts .cvsignore files. Good thing. :) 2002-09-27 14:45:38 +00:00
src add a dot11mib for shortpreamble. 2002-09-29 14:28:20 +00:00
.cvsignore .cvsignore files. Good thing. :) 2002-09-27 14:45:38 +00:00
AVS.rmdirs Initial checkin. 2001-03-24 21:39:56 +00:00
CHANGES doc updates. 2002-09-29 14:41:26 +00:00
COPYING Changed the comment header at the top of all the files to reflect the new company name. 2000-07-05 04:57:04 +00:00
Configure 0.1.15-final. Plus a PCMCIA configure bug. 2002-09-23 22:11:44 +00:00
FAQ updates . 2002-09-28 17:31:47 +00:00
LICENSE Initial add of the MPL version 1.1. 2000-02-07 19:26:25 +00:00
Makefile Added a few small changes and the tags generation changes.:wq 2002-06-24 16:18:42 +00:00
README doc updates. 2002-09-29 14:41:26 +00:00
THANKS Fix for PCI crash on unload for 2.2.x PCI systems. 2002-09-26 12:45:52 +00:00
TODO doc updates. 2002-09-29 14:41:26 +00:00
config.in 0.1.15-final. Plus a PCMCIA configure bug. 2002-09-23 22:11:44 +00:00

README

* README
*
* Copyright (C) 2001 AbsoluteValue Systems, Inc.  All Rights Reserved.
* --------------------------------------------------------------------
*
* linux-wlan
*
*   The contents of this file are subject to the Mozilla Public
*   License Version 1.1 (the "License"); you may not use this file
*   except in compliance with the License. You may obtain a copy of
*   the License at http://www.mozilla.org/MPL/
*
*   Software distributed under the License is distributed on an "AS
*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
*   implied. See the License for the specific language governing
*   rights and limitations under the License.
*
*   Alternatively, the contents of this file may be used under the
*   terms of the GNU Public License version 2 (the "GPL"), in which
*   case the provisions of the GPL are applicable instead of the
*   above.  If you wish to allow the use of your version of this file
*   only under the terms of the GPL and not to allow others to use
*   your version of this file under the MPL, indicate your decision
*   by deleting the provisions above and replace them with the notice
*   and other provisions required by the GPL.  If you do not delete
*   the provisions above, a recipient may use your version of this
*   file under either the MPL or the GPL.
*
* --------------------------------------------------------------------
*
* Inquiries regarding the linux-wlan Open Source project can be
* made directly to:
*
* AbsoluteValue Systems Inc.
* info@linux-wlan.com
* http://www.linux-wlan.com
*
* --------------------------------------------------------------------
*
* Portions of the development of this software were funded by 
* Intersil Corporation as part of PRISM(R) chipset product development.
*
* --------------------------------------------------------------------

=======================================================================
Description:
The linux-wlan package is a linux device driver and subsystem
package that is intended to provide the full range of IEEE 802.11 MAC
management capabilities for use in user-mode utilities and scripts.
The package currently supports the Intersil 802.11b Prism2, Prism2.5, 
and Prism3 reference designs for PCMCIA, PCI, and USB.  Additionally,
the package includes support for PLX9052 based PCI to PCMCIA adapter
with a few different PCMCIA cards.

For a list of elements that are still undone, see the TODO file in 
this directory

=======================================================================
License:
See the COPYING and LICENSE files.

=======================================================================
Top level directory for linux-wlan-ng:
./add-ons	- additional programs that are not build from the 
                  top level make file
./doc		- source distribution documentation
./etc		- scripts used at run-time
./man		- man pages
./scripts	- contributed scripts that may do useful things
./src		- source code for various components


=======================================================================
Test Configurations:
This release was tested on the following configurations:

Intel:
   Kernel | pcmcia_cs | Distribution |  Device Types    
   -------+-----------+--------------+---------------------------------------
   2.4.18 | 3.1.31    | Debian woody |  Prism2-PCMCIA-PFlash
          |           |              |  Prism2.5-PCMCIA-PFlash
          |           |              |  Prism2.5-PCI-PFlash
          |           |              |  Prism2.5-USB-PFlash
          |           |              |  Prism3-PCMCIA-PFlash
   -------+-----------+--------------+---------------------------------------
   2.4.19 | 3.2.0     | Redhat 7.2   |  Prism2.5-PCI-PFlash
	  |           |              |  Prism2.5-USB-PFlash
	  |	      | 	     |  Prism2-PCMCIA-PFlash   
          |           |              |  Prism2.5-PCMCIA-PFlash

PowerPC:
   Kernel | pcmcia_cs | Distribution |  Device Types    
   -------+-----------+--------------+---------------------------------------
   2.2.13 | 3.1.10    | Custom       |  Prism2-PCMCIA-PFlash
          |           |              |  Prism2.5-PCMCIA-PFlash
          |           |              |  Prism3-PCMCIA-PFlash
   -------+-----------+--------------+---------------------------------------
   2.4.19 | 3.2.1     | Custom       |  Prism2-PCMCIA-PFlash
          |           |              |  Prism2.5-PCMCIA-PFlash
          |           |              |  Prism3-PCMCIA-PFlash

=======================================================================
Build Instructions:

NOTE: You may not need to build at all.  Binary packages are
available for various distributions.  See the FAQ for where to go.

NOTE: This release supports building four different drivers:

   prism2_cs	Driver for Prism2.x & Prism3  PCMCIA cards.
   prism2_pci	Driver for Prism2.5 (ISL3874) based _native_ PCI cards.
   prism2_plx	Driver for Prism2.x PCMCIA cards when used with 
		a PLX9052 PCI/PCMCIA adapter.
   prism2_usb   Driver for Prism2.x USB adapters.


Prerequisites:

To build linux-wlan-ng you will need:
   - Configured kernel source code for the kernel you are running.  
     Ideally, this will be the resulting tree after building your own 
     kernel.  Configured means that you have at least run 'make config',
     'make menuconfig', or 'make xconfig'.  If you are trying to build
     linux-wlan-ng for a previously existing kernel binary (one you did 
     not build yourself), look for help on the mailing lists because it 
     can be tricky.  I always run against kernels I've built myself, so I'm 
     not much help in this area.
   - The good David Leffler identified that if you are having difficulty
     with *_netlink_* symbols, you may have a problem with 'make clean' in
     the kernel tree.  Do a 'make mrproper' followed by 'make config' 
     and the rest of the kernel build process.  'make mrproper' does
     a more thorough cleaning of the kernel tree.  For more info, look
     for David's comments in the linux-wlan-user mailing list.
   - If you are building a driver for a PCMCIA card, you will also need
     the configured PCMCIA source code for the pcmcia_cs subsystem you
     are currently running.

Building linux-wlan-ng:

1)  untar the package using the command:

    tar zxvf linux-wlan-ng-X.Y.Z.tar.gz

2)  Make sure you have configured kernel and (optionally) pcmcia sources on 
    your system.  Note that if you are _only_ building the prism2_pci,
    prism2_plx, or prism2_usb drivers you don't need the pcmcia-cs 
    source tree.

3)  To configure the linux-wlan-ng package, run 'make config'.  The 
    following set of questions will be asked. The default answer is in
    braces (e.g. []).  Just press <Enter> to select the default answer:

   - "Build Prism2.x PCMCIA Card Services (_cs) driver? (y/n) [y]: "
        Select "y" if you want to build the Prism PCMCIA driver.
        If you select "n", the PCMCIA related questions below
        will not be asked.

   - Build Prism2 PLX9052 based PCI (_plx) adapter driver? (y/n) [y]: 
        Select "y" if you want to build the Prism driver for 
        PLX PCI9052 PCI/PCMCIA adapter based solutions.

   - Build Prism2.5 native PCI (_pci) driver? (y/n) [y]: 
        Select "y" if you want to build the Prism driver for 
        Prism2.5 ISL3874 based native PCI cards.  This includes
        PCI add-in cards and the mini-pci modules included in some
        notebook computers (but not all, some use internal USB modules).

   - Build Prism2.5 USB (_usb) driver? (y/n) [y]: 
        Select "y" if you want to build the Prism driver for 
        Prism2.5 ISL3873 based USB adapters.  This includes
        USB add-on modules and the internal modules included in some
        notebook computers.

   - Linux source directory [/usr/src/linux]: 
        The config script will attempt to automagically find your kernel
        source directory.  If found, the kernel source source directory
        will be presented as the default selection.  If the default
        selection is wrong, you may correct it here.

   - pcmcia-cs source dir [/usr/src/pcmcia-cs-3.1.29]: 
        If the "_cs" driver is selected above, the configure script will
        attempt to present a reasonable default for the pcmcia source
        directory.  If the presented directory is incorrect, you may
        change it here.  If the "_cs" driver is not selected, this
        prompt will not appear.

   - PCMCIA script directory [/etc/pcmcia]: 
        If the "_cs" driver is selected, this prompt allows you to 
        change the location where the pcmcia scripts will be installed.
        Only do this if you have installed the rest of the pcmcia_cs
        scripts to a non-default location.

   - Alternate target install root directory on host []:   
        This prompt allows you to specify an alternative root directory
        for the install process.

   - Module install directory [/lib/modules/2.2.20]: 
        Select where you want the driver modules to be installed.  The
        script constructs a default location using the output of uname.
        If you have not yet installed the kernel you will run linux-wlan
        with, and the new kernel has a different version string, you will
        need to change this value.

   - Prefix for build host compiler? (rarely needed) []: 
        When cross-compiling or using different compilers for kernel and
        user-mode software, it is sometimes (but rarely) necessary to 
        specify a different compiler prefix to use when compiling the 
        _tools_ that are built to run on the build host during the 
        linux-wlan-ng build process.

   - Compiling with a cross compiler? (y/n) [n]: 
        If you are cross compiling, we need to enable the building of
        the linux-wlan-ng build-time tools using the local host compiler
        rather than the cross-compiler.

   - Build for debugging (see doc/config.debug) (y/n) [y]: 
        This option enables the inclusion of debug output generating
        statements in the driver code.  Note that enabling those statements
        requires the inclusion of insmod/modprobe command line arguments
        when loading the modules.  See the document doc/config.debug
        for more information.


5)  To build the package, run 'make all'

6)  To install the package, run 'make install' (as root).

=======================================================================
Configuring:

NOTE:  linux-wlan-ng does not fully implement the wireless extensions
       interface.  This means that you can't use iwconfig and its kin to 
       set things up.  Instead, read on!

------------------------------
FOR PCMCIA USERS:
A)  Edit the /etc/pcmcia/wlan-ng.opts file to configure. These options are
    set every time you insert a card.  If you want to change an option
    after the initial configuration, a) pop your card out, b) alter the 
    file, c) insert your card.  For more information see the file(s)
    linux-wlan-ng*/doc/config.*

B)  Edit your network.opts file to set up your IP settings.  Note: for a 
    station, the SSID you're connecting to will be appended to the 
    current pcmcia scheme name.  You can use this to have different
    IP setups for different wireless LANs you connect to (e.g. home vs. work).

C)  Restart pcmcia-cs with the command:

    /etc/rc.d/init.d/pcmcia restart

D) Insert the card.  For most cards, a solid LED indicates that the 
    SSID you specified was found, a bss was joined, and the firmware 
    completed the authenticate and associate processes.

E) Run ifconfig and route to determine if your IP and route settings are
    listed as you wanted them.  It's also a good idea to look at the file
    /etc/resolv.conf to see if your nameserver address has been set up 
    correctly.

------------------------------
FOR PCI, PLX, OR USB USERS:
A) You must make sure that the drivers get loaded at boot time and that the 
   necessary initialization takes place.  The simplest way to do this is
   to add the following commands to your rc.local file:

     modprobe prism2_pci   [or prism2_usb/prism2_plx]
     wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable
     wlanctl-ng wlan0 lnxreq_autojoin ssid=<your APs SSID> authtype=opensystem
     ifconfig wlan0 <yourIP> netmask <yourNetmask> broadcast <yourBroadcast>
     route add default gw <yourGateway>

   Also, don't forget to set up your resolv.conf to point at your DNS server.

B) Alternatively you can try out the rc.wlan and wlan.conf scripts. 
   They do work, and they are installed into your */init.d directory
   and /etc directory.  We don't currently create the soft-link from
   the runlevel directory to the wlan startup script because the
   distributions vary too much in this respect.  You'll need to create
   the soft-link yourself.  Just make sure it is early in the process,
   namely, before the the network interfaces are brought up.  The
   actual setup of the SSID and such is in the file /etc/wlan.conf.
   Note that you'll also need to add an modules.conf alias statement
   for the driver that you wish to load (pci or plx), we don't
   explicitly load a module in init.d/wlan because we don't know which
   one you want. ;-)

------------------------------
FOR USB USERS:

A) Make sure your kernel usb support is running
B) Plug in the Prism2.x USB device
C) Run 'modprobe prism2_usb prism2_doreset=1' to load the driver into memory.
D) Run 'wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable' to initialize the
   driver+MAC functions.
E) Run 'wlanctl-ng wlan0 lnxreq_autojoin ssid=<your ssid> authtype=opensystem'
   to enable the MAC in Infrastructure Station mode.
F) Run 'ifconfig wlan0 <your IP address>'

NOTE: USB devices currently integrated into the hotplug subsystem, and
      use the /etc/wlan.conf configuration file.

IMPORTANT: Due to an issue with some versions of the Prism USB firmware,
the driver usually needs to perform a port reset.  

Some combinations of usb low-level drivers, kernel releases, and
hardware don't like this, and usually end up generating a kernel OOPS.
newer kernels are much better in this regard.  In particular, Intel usb
controllers are the most trouble-prone.

The OOPS is due to bugs in the linux USB core, and newer kernels
(2.4.19 and later) behave much better in this regard.

However, the good news is that primary firmware 1.1.2 seems to resolve
the need for the port reset to begin with.  Contact your vendor to
request this update.