STM32 USB Virtual Com Port driver v1.2.0
This commit is contained in:
parent
0b8473a7bc
commit
7b9b359c2d
291
libs/unused_libs/STM32_USB_Device_VCP/inc/usb_conf.h
Normal file
291
libs/unused_libs/STM32_USB_Device_VCP/inc/usb_conf.h
Normal file
|
|
@ -0,0 +1,291 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usb_conf.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.2.0
|
||||
* @date 09-November-2015
|
||||
* @brief General low level driver configuration
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USB_CONF__H__
|
||||
#define __USB_CONF__H__
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx.h"
|
||||
#define USE_USB_OTG_FS
|
||||
|
||||
/** @addtogroup USB_OTG_DRIVER
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USB_CONF
|
||||
* @brief USB low level driver configuration file
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USB_CONF_Exported_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* USB Core and PHY interface configuration.
|
||||
Tip: To avoid modifying these defines each time you need to change the USB
|
||||
configuration, you can declare the needed define in your toolchain
|
||||
compiler preprocessor.
|
||||
*/
|
||||
/****************** USB OTG FS PHY CONFIGURATION *******************************
|
||||
* The USB OTG FS Core supports one on-chip Full Speed PHY.
|
||||
*
|
||||
* The USE_EMBEDDED_PHY symbol is defined in the project compiler preprocessor
|
||||
* when FS core is used.
|
||||
*******************************************************************************/
|
||||
#ifndef USE_USB_OTG_FS
|
||||
/* #define USE_USB_OTG_FS */
|
||||
#endif /* USE_USB_OTG_FS */
|
||||
|
||||
#ifdef USE_USB_OTG_FS
|
||||
#define USB_OTG_FS_CORE
|
||||
#endif
|
||||
|
||||
/****************** USB OTG HS PHY CONFIGURATION *******************************
|
||||
* The USB OTG HS Core supports two PHY interfaces:
|
||||
* (i) An ULPI interface for the external High Speed PHY: the USB HS Core will
|
||||
* operate in High speed mode
|
||||
* (ii) An on-chip Full Speed PHY: the USB HS Core will operate in Full speed mode
|
||||
*
|
||||
* You can select the PHY to be used using one of these two defines:
|
||||
* (i) USE_ULPI_PHY: if the USB OTG HS Core is to be used in High speed mode
|
||||
* (ii) USE_EMBEDDED_PHY: if the USB OTG HS Core is to be used in Full speed mode
|
||||
*
|
||||
* Notes:
|
||||
* - The USE_ULPI_PHY symbol is defined in the project compiler preprocessor as
|
||||
* default PHY when HS core is used.
|
||||
* - On STM322xG-EVAL and STM324xG-EVAL boards, only configuration(i) is available.
|
||||
* Configuration (ii) need a different hardware, for more details refer to your
|
||||
* STM32 device datasheet.
|
||||
*******************************************************************************/
|
||||
#ifndef USE_USB_OTG_HS
|
||||
/* #define USE_USB_OTG_HS */
|
||||
#endif /* USE_USB_OTG_HS */
|
||||
|
||||
#ifndef USE_ULPI_PHY
|
||||
/* #define USE_ULPI_PHY */
|
||||
#endif /* USE_ULPI_PHY */
|
||||
|
||||
#ifndef USE_EMBEDDED_PHY
|
||||
/* #define USE_EMBEDDED_PHY */
|
||||
#endif /* USE_EMBEDDED_PHY */
|
||||
|
||||
#ifdef USE_USB_OTG_HS
|
||||
#define USB_OTG_HS_CORE
|
||||
#endif
|
||||
|
||||
/*******************************************************************************
|
||||
* FIFO Size Configuration in Device mode
|
||||
*
|
||||
* (i) Receive data FIFO size = RAM for setup packets +
|
||||
* OUT endpoint control information +
|
||||
* data OUT packets + miscellaneous
|
||||
* Space = ONE 32-bits words
|
||||
* --> RAM for setup packets = 10 spaces
|
||||
* (n is the nbr of CTRL EPs the device core supports)
|
||||
* --> OUT EP CTRL info = 1 space
|
||||
* (one space for status information written to the FIFO along with each
|
||||
* received packet)
|
||||
* --> data OUT packets = (Largest Packet Size / 4) + 1 spaces
|
||||
* (MINIMUM to receive packets)
|
||||
* --> OR data OUT packets = at least 2*(Largest Packet Size / 4) + 1 spaces
|
||||
* (if high-bandwidth EP is enabled or multiple isochronous EPs)
|
||||
* --> miscellaneous = 1 space per OUT EP
|
||||
* (one space for transfer complete status information also pushed to the
|
||||
* FIFO with each endpoint's last packet)
|
||||
*
|
||||
* (ii)MINIMUM RAM space required for each IN EP Tx FIFO = MAX packet size for
|
||||
* that particular IN EP. More space allocated in the IN EP Tx FIFO results
|
||||
* in a better performance on the USB and can hide latencies on the AHB.
|
||||
*
|
||||
* (iii) TXn min size = 16 words. (n : Transmit FIFO index)
|
||||
* (iv) When a TxFIFO is not used, the Configuration should be as follows:
|
||||
* case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
|
||||
* --> Txm can use the space allocated for Txn.
|
||||
* case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
|
||||
* --> Txn should be configured with the minimum space of 16 words
|
||||
* (v) The FIFO is used optimally when used TxFIFOs are allocated in the top
|
||||
* of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
|
||||
* (vi) In HS case 12 FIFO locations should be reserved for internal DMA registers
|
||||
* so total FIFO size should be 1012 Only instead of 1024
|
||||
*******************************************************************************/
|
||||
|
||||
/****************** USB OTG HS CONFIGURATION **********************************/
|
||||
#ifdef USB_OTG_HS_CORE
|
||||
#define RX_FIFO_HS_SIZE 512
|
||||
#define TX0_FIFO_HS_SIZE 64
|
||||
#define TX1_FIFO_HS_SIZE 372
|
||||
#define TX2_FIFO_HS_SIZE 64
|
||||
#define TX3_FIFO_HS_SIZE 0
|
||||
#define TX4_FIFO_HS_SIZE 0
|
||||
#define TX5_FIFO_HS_SIZE 0
|
||||
|
||||
/* #define USB_OTG_HS_SOF_OUTPUT_ENABLED */
|
||||
|
||||
#ifdef USE_ULPI_PHY
|
||||
#define USB_OTG_ULPI_PHY_ENABLED
|
||||
#endif
|
||||
#ifdef USE_EMBEDDED_PHY
|
||||
#define USB_OTG_EMBEDDED_PHY_ENABLED
|
||||
/* wakeup is working only when HS core is configured in FS mode */
|
||||
/* #define USB_OTG_HS_LOW_PWR_MGMT_SUPPORT */
|
||||
#endif
|
||||
/* #define USB_OTG_HS_INTERNAL_DMA_ENABLED */ /* Be aware that enabling DMA mode will result in data being sent only by
|
||||
multiple of 4 packet sizes. This is due to the fact that USB DMA does
|
||||
not allow sending data from non word-aligned addresses.
|
||||
For this specific application, it is advised to not enable this option
|
||||
unless required. */
|
||||
#define USB_OTG_HS_DEDICATED_EP1_ENABLED
|
||||
#endif
|
||||
|
||||
/****************** USB OTG FS CONFIGURATION **********************************/
|
||||
#ifdef USB_OTG_FS_CORE
|
||||
#define RX_FIFO_FS_SIZE 128
|
||||
#define TX0_FIFO_FS_SIZE 32
|
||||
#define TX1_FIFO_FS_SIZE 128
|
||||
#define TX2_FIFO_FS_SIZE 32
|
||||
#define TX3_FIFO_FS_SIZE 0
|
||||
|
||||
/* #define USB_OTG_FS_LOW_PWR_MGMT_SUPPORT */
|
||||
/* #define USB_OTG_FS_SOF_OUTPUT_ENABLED */
|
||||
#endif
|
||||
|
||||
/****************** USB OTG MISC CONFIGURATION ********************************/
|
||||
// #define VBUS_SENSING_ENABLED
|
||||
|
||||
/****************** USB OTG MODE CONFIGURATION ********************************/
|
||||
/* #define USE_HOST_MODE */
|
||||
#define USE_DEVICE_MODE
|
||||
/* #define USE_OTG_MODE */
|
||||
|
||||
#ifndef USB_OTG_FS_CORE
|
||||
#ifndef USB_OTG_HS_CORE
|
||||
#error "USB_OTG_HS_CORE or USB_OTG_FS_CORE should be defined"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef USE_DEVICE_MODE
|
||||
#ifndef USE_HOST_MODE
|
||||
#error "USE_DEVICE_MODE or USE_HOST_MODE should be defined"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef USE_USB_OTG_HS
|
||||
#ifndef USE_USB_OTG_FS
|
||||
#error "USE_USB_OTG_HS or USE_USB_OTG_FS should be defined"
|
||||
#endif
|
||||
#else /* USE_USB_OTG_HS */
|
||||
#ifndef USE_ULPI_PHY
|
||||
#ifndef USE_EMBEDDED_PHY
|
||||
#error "USE_ULPI_PHY or USE_EMBEDDED_PHY should be defined"
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/****************** C Compilers dependant keywords ****************************/
|
||||
/* In HS mode and when the DMA is used, all variables and data structures dealing
|
||||
with the DMA during the transaction process should be 4-bytes aligned */
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined (__GNUC__) /* GNU Compiler */
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#define __ALIGN_BEGIN
|
||||
#else
|
||||
#define __ALIGN_END
|
||||
#if defined (__CC_ARM) /* ARM Compiler */
|
||||
#define __ALIGN_BEGIN __align(4)
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __ALIGN_BEGIN
|
||||
#elif defined (__TASKING__) /* TASKING Compiler */
|
||||
#define __ALIGN_BEGIN __align(4)
|
||||
#endif /* __CC_ARM */
|
||||
#endif /* __GNUC__ */
|
||||
#else
|
||||
#define __ALIGN_BEGIN
|
||||
#define __ALIGN_END
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
|
||||
/* __packed keyword used to decrease the data type alignment to 1-byte */
|
||||
#if defined (__CC_ARM) /* ARM Compiler */
|
||||
#define __packed __packed
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __packed __packed
|
||||
#elif defined ( __GNUC__ ) /* GNU Compiler */
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__ ((__packed__))
|
||||
#endif
|
||||
#elif defined (__TASKING__) /* TASKING Compiler */
|
||||
#define __packed __unaligned
|
||||
#endif /* __CC_ARM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USB_CONF_Exported_Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USB_CONF_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_CONF_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_CONF_Exported_FunctionsPrototype
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#endif /* __USB_CONF__H__ */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
111
libs/unused_libs/STM32_USB_Device_VCP/inc/usbd_conf.h
Normal file
111
libs/unused_libs/STM32_USB_Device_VCP/inc/usbd_conf.h
Normal file
|
|
@ -0,0 +1,111 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usbd_conf.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.2.0
|
||||
* @date 09-November-2015
|
||||
* @brief USB Device configuration file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USBD_CONF__H__
|
||||
#define __USBD_CONF__H__
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usb_conf.h"
|
||||
|
||||
/** @defgroup USB_CONF_Exported_Defines
|
||||
* @{
|
||||
*/
|
||||
#define USBD_CFG_MAX_NUM 1
|
||||
#define USBD_ITF_MAX_NUM 1
|
||||
|
||||
#define USBD_SELF_POWERED
|
||||
|
||||
#define USB_MAX_STR_DESC_SIZ 255
|
||||
|
||||
/** @defgroup USB_VCP_Class_Layer_Parameter
|
||||
* @{
|
||||
*/
|
||||
#define CDC_IN_EP 0x81 /* EP1 for data IN */
|
||||
#define CDC_OUT_EP 0x01 /* EP1 for data OUT */
|
||||
#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */
|
||||
|
||||
/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
|
||||
#ifdef USE_USB_OTG_HS
|
||||
#define CDC_DATA_MAX_PACKET_SIZE 512 /* Endpoint IN & OUT Packet size */
|
||||
#define CDC_CMD_PACKET_SZE 8 /* Control Endpoint Packet size */
|
||||
|
||||
#define CDC_IN_FRAME_INTERVAL 40 /* Number of micro-frames between IN transfers */
|
||||
#define APP_RX_DATA_SIZE 2048 /* Total size of IN buffer:
|
||||
APP_RX_DATA_SIZE*8/MAX_BAUDARATE*1000 should be > CDC_IN_FRAME_INTERVAL*8 */
|
||||
#else
|
||||
#define CDC_DATA_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */
|
||||
#define CDC_CMD_PACKET_SZE 8 /* Control Endpoint Packet size */
|
||||
|
||||
#ifndef CDC_IN_FRAME_INTERVAL
|
||||
#define CDC_IN_FRAME_INTERVAL 5 /* Number of frames between IN transfers */
|
||||
#endif // CDC_IN_FRAME_INTERVAL
|
||||
#ifndef APP_RX_DATA_SIZE
|
||||
#define APP_RX_DATA_SIZE 2048 /* Total size of IN buffer:
|
||||
APP_RX_DATA_SIZE*8/MAX_BAUDARATE*1000 should be > CDC_IN_FRAME_INTERVAL */
|
||||
#endif // APP_RX_DATA_SIZE
|
||||
#endif /* USE_USB_OTG_HS */
|
||||
|
||||
#define APP_FOPS VCP_fops
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_CONF_Exported_Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USB_CONF_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_CONF_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USB_CONF_Exported_FunctionsPrototype
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
#endif //__USBD_CONF__H__
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
124
libs/unused_libs/STM32_USB_Device_VCP/inc/usbd_desc.h
Normal file
124
libs/unused_libs/STM32_USB_Device_VCP/inc/usbd_desc.h
Normal file
|
|
@ -0,0 +1,124 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usbd_desc.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.2.0
|
||||
* @date 09-November-2015
|
||||
* @brief header file for the usbd_desc.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
|
||||
#ifndef __USB_DESC_H
|
||||
#define __USB_DESC_H
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usbd_req.h"
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USB_DESC
|
||||
* @brief general defines for the usb device library file
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USB_DESC_Exported_Defines
|
||||
* @{
|
||||
*/
|
||||
#define USB_DEVICE_DESCRIPTOR_TYPE 0x01
|
||||
#define USB_CONFIGURATION_DESCRIPTOR_TYPE 0x02
|
||||
#define USB_STRING_DESCRIPTOR_TYPE 0x03
|
||||
#define USB_INTERFACE_DESCRIPTOR_TYPE 0x04
|
||||
#define USB_ENDPOINT_DESCRIPTOR_TYPE 0x05
|
||||
#define USB_SIZ_DEVICE_DESC 18
|
||||
#define USB_SIZ_STRING_LANGID 4
|
||||
|
||||
#define DEVICE_ID ((__IO uint32_t *)0x1FFF7A10)
|
||||
|
||||
#define USB_SIZ_STRING_SERIAL 0x1A
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern uint8_t USBD_DeviceDesc[USB_SIZ_DEVICE_DESC];
|
||||
extern uint8_t USBD_StrDesc[USB_MAX_STR_DESC_SIZ];
|
||||
extern uint8_t USBD_OtherSpeedCfgDesc[USB_LEN_CFG_DESC];
|
||||
extern uint8_t USBD_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC];
|
||||
extern uint8_t USBD_LangIDDesc[USB_SIZ_STRING_LANGID];
|
||||
extern USBD_DEVICE USR_desc;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_FunctionsPrototype
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
uint8_t *USBD_USR_DeviceDescriptor(uint8_t speed, uint16_t *length);
|
||||
uint8_t *USBD_USR_LangIDStrDescriptor(uint8_t speed, uint16_t *length);
|
||||
uint8_t *USBD_USR_ManufacturerStrDescriptor(uint8_t speed, uint16_t *length);
|
||||
uint8_t *USBD_USR_ProductStrDescriptor(uint8_t speed, uint16_t *length);
|
||||
uint8_t *USBD_USR_SerialStrDescriptor(uint8_t speed, uint16_t *length);
|
||||
uint8_t *USBD_USR_ConfigStrDescriptor(uint8_t speed, uint16_t *length);
|
||||
uint8_t *USBD_USR_InterfaceStrDescriptor(uint8_t speed, uint16_t *length);
|
||||
|
||||
#ifdef USB_SUPPORT_USER_STRING_DESC
|
||||
uint8_t *USBD_USR_USRStringDesc (uint8_t speed, uint8_t idx, uint16_t *length);
|
||||
#endif /* USB_SUPPORT_USER_STRING_DESC */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* __USBD_DESC_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
358
libs/unused_libs/STM32_USB_Device_VCP/src/usbd_desc.c
Normal file
358
libs/unused_libs/STM32_USB_Device_VCP/src/usbd_desc.c
Normal file
|
|
@ -0,0 +1,358 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usbd_desc.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.2.0
|
||||
* @date 09-November-2015
|
||||
* @brief This file provides the USBD descriptors and string formating method.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usbd_core.h"
|
||||
#include "usbd_desc.h"
|
||||
#include "usbd_req.h"
|
||||
#include "usbd_conf.h"
|
||||
#include "usb_regs.h"
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC
|
||||
* @brief USBD descriptors module
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
#ifndef USBD_VID
|
||||
#define USBD_VID 0x0483
|
||||
#endif
|
||||
#ifndef USBD_PID
|
||||
#define USBD_PID 0x5740
|
||||
#endif
|
||||
|
||||
/** @defgroup USB_String_Descriptors
|
||||
* @{
|
||||
*/
|
||||
#define USBD_LANGID_STRING 0x409
|
||||
#ifndef USBD_MANUFACTURER_STRING
|
||||
#define USBD_MANUFACTURER_STRING "STMicroelectronics"
|
||||
#endif
|
||||
#ifndef USBD_PRODUCT_STRING
|
||||
#define USBD_PRODUCT_STRING "STM32 Virtual ComPort"
|
||||
#endif
|
||||
#define USBD_CONFIGURATION_STRING "VCP Config"
|
||||
#define USBD_INTERFACE_STRING "VCP Interface"
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
USBD_DEVICE USR_desc =
|
||||
{
|
||||
USBD_USR_DeviceDescriptor,
|
||||
USBD_USR_LangIDStrDescriptor,
|
||||
USBD_USR_ManufacturerStrDescriptor,
|
||||
USBD_USR_ProductStrDescriptor,
|
||||
USBD_USR_SerialStrDescriptor,
|
||||
USBD_USR_ConfigStrDescriptor,
|
||||
USBD_USR_InterfaceStrDescriptor,
|
||||
};
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
/* USB Standard Device Descriptor */
|
||||
__ALIGN_BEGIN uint8_t USBD_DeviceDesc[USB_SIZ_DEVICE_DESC] __ALIGN_END =
|
||||
{
|
||||
0x12, /*bLength */
|
||||
USB_DEVICE_DESCRIPTOR_TYPE, /*bDescriptorType*/
|
||||
0x00, /*bcdUSB */
|
||||
0x02,
|
||||
0x00, /*bDeviceClass*/
|
||||
0x00, /*bDeviceSubClass*/
|
||||
0x00, /*bDeviceProtocol*/
|
||||
USB_OTG_MAX_EP0_SIZE, /*bMaxPacketSize*/
|
||||
LOBYTE(USBD_VID), /*idVendor*/
|
||||
HIBYTE(USBD_VID), /*idVendor*/
|
||||
LOBYTE(USBD_PID), /*idVendor*/
|
||||
HIBYTE(USBD_PID), /*idVendor*/
|
||||
0x00, /*bcdDevice rel. 2.00*/
|
||||
0x02,
|
||||
USBD_IDX_MFC_STR, /*Index of manufacturer string*/
|
||||
USBD_IDX_PRODUCT_STR, /*Index of product string*/
|
||||
USBD_IDX_SERIAL_STR, /*Index of serial number string*/
|
||||
USBD_CFG_MAX_NUM /*bNumConfigurations*/
|
||||
} ; /* USB_DeviceDescriptor */
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
/* USB Standard Device Descriptor */
|
||||
__ALIGN_BEGIN uint8_t USBD_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
|
||||
{
|
||||
USB_LEN_DEV_QUALIFIER_DESC,
|
||||
USB_DESC_TYPE_DEVICE_QUALIFIER,
|
||||
0x00,
|
||||
0x02,
|
||||
0x00,
|
||||
0x00,
|
||||
0x00,
|
||||
0x40,
|
||||
0x01,
|
||||
0x00,
|
||||
};
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
/* USB Standard Device Descriptor */
|
||||
__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_SIZ_STRING_LANGID] __ALIGN_END =
|
||||
{
|
||||
USB_SIZ_STRING_LANGID,
|
||||
USB_DESC_TYPE_STRING,
|
||||
LOBYTE(USBD_LANGID_STRING),
|
||||
HIBYTE(USBD_LANGID_STRING),
|
||||
};
|
||||
|
||||
uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] =
|
||||
{
|
||||
USB_SIZ_STRING_SERIAL,
|
||||
USB_DESC_TYPE_STRING,
|
||||
};
|
||||
|
||||
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
|
||||
__ALIGN_BEGIN uint8_t USBD_StrDesc[USB_MAX_STR_DESC_SIZ] __ALIGN_END ;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
static void IntToUnicode(uint32_t value, uint8_t *pbuf, uint8_t len);
|
||||
static void Get_SerialNum(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_DeviceDescriptor
|
||||
* return the device descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t *USBD_USR_DeviceDescriptor(uint8_t speed, uint16_t *length)
|
||||
{
|
||||
*length = sizeof(USBD_DeviceDesc);
|
||||
return (uint8_t *) USBD_DeviceDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_LangIDStrDescriptor
|
||||
* return the LangID string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t *USBD_USR_LangIDStrDescriptor(uint8_t speed, uint16_t *length)
|
||||
{
|
||||
*length = sizeof(USBD_LangIDDesc);
|
||||
return (uint8_t *) USBD_LangIDDesc;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_ProductStrDescriptor
|
||||
* return the product string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t *USBD_USR_ProductStrDescriptor(uint8_t speed, uint16_t *length)
|
||||
{
|
||||
USBD_GetString((uint8_t *)(uint8_t *)USBD_PRODUCT_STRING, USBD_StrDesc, length);
|
||||
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_ManufacturerStrDescriptor
|
||||
* return the manufacturer string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t *USBD_USR_ManufacturerStrDescriptor(uint8_t speed, uint16_t *length)
|
||||
{
|
||||
USBD_GetString((uint8_t *)(uint8_t *) USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_SerialStrDescriptor
|
||||
* return the serial number string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t *USBD_USR_SerialStrDescriptor(uint8_t speed, uint16_t *length)
|
||||
{
|
||||
*length = USB_SIZ_STRING_SERIAL;
|
||||
|
||||
/* Update the serial number string descriptor with the data from the unique ID*/
|
||||
Get_SerialNum();
|
||||
|
||||
return (uint8_t *) USBD_StringSerial;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_ConfigStrDescriptor
|
||||
* return the configuration string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t *USBD_USR_ConfigStrDescriptor(uint8_t speed, uint16_t *length)
|
||||
{
|
||||
USBD_GetString((uint8_t *)(uint8_t *) USBD_CONFIGURATION_STRING, USBD_StrDesc, length);
|
||||
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_InterfaceStrDescriptor
|
||||
* return the interface string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t *USBD_USR_InterfaceStrDescriptor(uint8_t speed, uint16_t *length)
|
||||
{
|
||||
USBD_GetString((uint8_t *)(uint8_t *) USBD_INTERFACE_STRING, USBD_StrDesc, length);
|
||||
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Create the serial number string descriptor
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void Get_SerialNum(void)
|
||||
{
|
||||
uint32_t deviceserial;
|
||||
|
||||
deviceserial = DEVICE_ID[0];
|
||||
deviceserial += DEVICE_ID[2];
|
||||
|
||||
if (deviceserial != 0)
|
||||
{
|
||||
IntToUnicode (deviceserial, &USBD_StringSerial[2] ,8);
|
||||
IntToUnicode (DEVICE_ID[1], &USBD_StringSerial[18] ,4);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Convert Hex 32Bits value into char
|
||||
* @param value: value to convert
|
||||
* @param pbuf: pointer to the buffer
|
||||
* @param len: buffer length
|
||||
* @retval None
|
||||
*/
|
||||
static void IntToUnicode(uint32_t value, uint8_t *pbuf , uint8_t len)
|
||||
{
|
||||
uint8_t idx = 0;
|
||||
|
||||
for ( idx = 0 ; idx < len ; idx ++)
|
||||
{
|
||||
if ( ((value >> 28)) < 0xA )
|
||||
{
|
||||
pbuf[2 * idx] = (value >> 28) + '0';
|
||||
}
|
||||
else
|
||||
{
|
||||
pbuf[2 * idx] = (value >> 28) + 'A' - 10;
|
||||
}
|
||||
value = value << 4;
|
||||
|
||||
pbuf[2 * idx + 1] = 0;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
193
libs/unused_libs/STM32_USB_Device_VCP/src/usbd_usr.c
Normal file
193
libs/unused_libs/STM32_USB_Device_VCP/src/usbd_usr.c
Normal file
|
|
@ -0,0 +1,193 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file usbd_usr.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.2.0
|
||||
* @date 09-November-2015
|
||||
* @brief This file includes the user application layer
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||||
* You may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at:
|
||||
*
|
||||
* http://www.st.com/software_license_agreement_liberty_v2
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usbd_usr.h"
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_USR
|
||||
* @brief This file includes the user application layer
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_USR_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_USR_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_USR_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_USR_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
USBD_Usr_cb_TypeDef USR_cb =
|
||||
{
|
||||
USBD_USR_Init,
|
||||
USBD_USR_DeviceReset,
|
||||
USBD_USR_DeviceConfigured,
|
||||
USBD_USR_DeviceSuspended,
|
||||
USBD_USR_DeviceResumed,
|
||||
USBD_USR_DeviceConnected,
|
||||
USBD_USR_DeviceDisconnected,
|
||||
};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_USR_Private_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/** @defgroup USBD_USR_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup USBD_USR_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_Init
|
||||
* Displays the message on LCD for host lib initialization
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_USR_Init(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_DeviceReset
|
||||
* Displays the message on LCD on device Reset Event
|
||||
* @param speed : device speed
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_USR_DeviceReset(uint8_t speed)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_DeviceConfigured
|
||||
* Displays the message on LCD on device configuration Event
|
||||
* @param None
|
||||
* @retval Status
|
||||
*/
|
||||
void USBD_USR_DeviceConfigured(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_DeviceSuspended
|
||||
* Displays the message on LCD on device suspend Event
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_USR_DeviceSuspended(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_DeviceResumed
|
||||
* Displays the message on LCD on device resume Event
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_USR_DeviceResumed(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_DeviceConnected
|
||||
* Displays the message on LCD on device connection Event
|
||||
* @param None
|
||||
* @retval Status
|
||||
*/
|
||||
void USBD_USR_DeviceConnected(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief USBD_USR_DeviceDisonnected
|
||||
* Displays the message on LCD on device disconnection Event
|
||||
* @param None
|
||||
* @retval Status
|
||||
*/
|
||||
void USBD_USR_DeviceDisconnected(void)
|
||||
{
|
||||
|
||||
}
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Loading…
Reference in a new issue