selphy_print/Makefile

CFLAGS = -Wall -Wextra -g
LDFLAGS = -lusb-1.0

CUPS_BACKEND_DIR = /usr/lib/cups/backend
CUPS_DATA_DIR = /usr/share/cups
DEPS = backend_common.h
SOURCES = backend_sonyupdr150.c backend_kodak6800.c backend_common.c backend_kodak1400.c backend_shinkos2145.c backend_canonselphy.c backend_mitsu70x.c

all: gutenprint sonyupdr150 kodak6800 kodak1400 shinkos2145 canonselphy mitsu70x

gutenprint: $(SOURCES) $(DEPS)
	gcc -o $@ $(SOURCES) $(LDFLAGS) $(CFLAGS)

sonyupdr150: gutenprint
	ln -sf gutenprint $@

kodak6800: gutenprint
	ln -sf gutenprint $@

kodak1400: gutenprint
	ln -sf gutenprint $@

shinkos2145: gutenprint
	ln -sf gutenprint $@

canonselphy: gutenprint
	ln -sf gutenprint $@

mitsu70x: gutenprint
	ln -sf gutenprint $@

install:	
	install -o root -m 700 gutenprint $(CUPS_BACKEND_DIR)/gutenprint+usb
	mkdir -p $(CUPS_DATA_DIR)/usb
	install -o root -m 644 blacklist $(CUPS_DATA_DIR)/usb/net.sf.gimp-print.usb-quirks

clean:
	rm -f gutenprint canonselphy kodak6800 kodak1400 shinkos2145 sonyupdr150 mitsu70x
common: Clean up some gcc warnings (when -Wextra is used) 2013-07-26 16:18:35 -04:00			`CFLAGS = -Wall -Wextra -g`
Add kodak6800 to makefile. 2013-06-27 22:45:50 -04:00			`LDFLAGS = -lusb-1.0`
[build] Add a makefile 2012-10-27 10:22:12 -04:00
Add kodak6800 to makefile. 2013-06-27 22:45:50 -04:00			`CUPS_BACKEND_DIR = /usr/lib/cups/backend`
blacklist: Add a quirks file for the CUPS 1.6.4+ or 1.7-rc2+ USB backend. This will blacklist all printers this backend supports. 2013-10-04 09:30:52 -04:00			`CUPS_DATA_DIR = /usr/share/cups`
kodak6800: 75% of new backend migration completed. Main loop is all that's left. 2013-07-18 18:03:40 -04:00			`DEPS = backend_common.h`
mitsu70x: Add an experimental backend for the Mitsubishi CP-D70x series. This as of yet untested, but guinea pigs welcome. 2013-10-05 09:55:29 -04:00			`SOURCES = backend_sonyupdr150.c backend_kodak6800.c backend_common.c backend_kodak1400.c backend_shinkos2145.c backend_canonselphy.c backend_mitsu70x.c`
[build] Add a makefile 2012-10-27 10:22:12 -04:00
mitsu70x: Add an experimental backend for the Mitsubishi CP-D70x series. This as of yet untested, but guinea pigs welcome. 2013-10-05 09:55:29 -04:00			`all: gutenprint sonyupdr150 kodak6800 kodak1400 shinkos2145 canonselphy mitsu70x`
unification: Rearrange internals quite a lot. Only Sony UP-DR150 driver is converted. Still to-do in common code: * Backend selection based on URI (ie CUPS mode) * Backend selection based on BACKEND or argv[0] (ie standalone mode) 2013-07-18 08:46:44 -04:00
kodak6800: 75% of new backend migration completed. Main loop is all that's left. 2013-07-18 18:03:40 -04:00			`gutenprint: $(SOURCES) $(DEPS)`
			`gcc -o $@ $(SOURCES) $(LDFLAGS) $(CFLAGS)`
s2145: Add a spooler for the Shinko/Sinfonia CHC-S2145. ...It doesn't work yet, something is wrong with the raw data xfer. 2013-07-06 10:14:06 -04:00
s2145: Migrate to new unified backend. UNTESTED. 2013-07-18 22:10:56 -04:00			`sonyupdr150: gutenprint`
common: Clean up some gcc warnings (when -Wextra is used) 2013-07-26 16:18:35 -04:00			`ln -sf gutenprint $@`
sony_updr150: Add a new experimental backend for the Sony UP-DR150 printer. 2013-07-14 15:55:35 -04:00
s2145: Migrate to new unified backend. UNTESTED. 2013-07-18 22:10:56 -04:00			`kodak6800: gutenprint`
common: Clean up some gcc warnings (when -Wextra is used) 2013-07-26 16:18:35 -04:00			`ln -sf gutenprint $@`
kodak6800: 75% of new backend migration completed. Main loop is all that's left. 2013-07-18 18:03:40 -04:00
s2145: Migrate to new unified backend. UNTESTED. 2013-07-18 22:10:56 -04:00			`kodak1400: gutenprint`
common: Clean up some gcc warnings (when -Wextra is used) 2013-07-26 16:18:35 -04:00			`ln -sf gutenprint $@`
s2145: Migrate to new unified backend. UNTESTED. 2013-07-18 22:10:56 -04:00
			`shinkos2145: gutenprint`
common: Clean up some gcc warnings (when -Wextra is used) 2013-07-26 16:18:35 -04:00			`ln -sf gutenprint $@`
s2145: Migrate to new unified backend. UNTESTED. 2013-07-18 22:10:56 -04:00
			`canonselphy: gutenprint`
common: Clean up some gcc warnings (when -Wextra is used) 2013-07-26 16:18:35 -04:00			`ln -sf gutenprint $@`
kodak6800: 75% of new backend migration completed. Main loop is all that's left. 2013-07-18 18:03:40 -04:00
mitsu70x: Add an experimental backend for the Mitsubishi CP-D70x series. This as of yet untested, but guinea pigs welcome. 2013-10-05 09:55:29 -04:00			`mitsu70x: gutenprint`
			`ln -sf gutenprint $@`

s2145: Rename helper to include manufacturer. 2013-07-06 11:03:49 -04:00			`install:`
makefile: Strip out the old stuff, only build new stuff now. Next up, porting other backends to new framework! 2013-07-18 12:51:05 -04:00			`install -o root -m 700 gutenprint $(CUPS_BACKEND_DIR)/gutenprint+usb`
blacklist: Add a quirks file for the CUPS 1.6.4+ or 1.7-rc2+ USB backend. This will blacklist all printers this backend supports. 2013-10-04 09:30:52 -04:00			`mkdir -p $(CUPS_DATA_DIR)/usb`
			`install -o root -m 644 blacklist $(CUPS_DATA_DIR)/usb/net.sf.gimp-print.usb-quirks`
[docs] Add some compilation and usage instructions. 2012-11-13 16:32:53 -05:00
			`clean:`
mitsu70x: Add an experimental backend for the Mitsubishi CP-D70x series. This as of yet untested, but guinea pigs welcome. 2013-10-05 09:55:29 -04:00			`rm -f gutenprint canonselphy kodak6800 kodak1400 shinkos2145 sonyupdr150 mitsu70x`