selphy_print/Makefile

BACKEND_NAME = gutenprint52+usb
EXEC_NAME = dyesub_backend

CFLAGS = -Wall -Wextra -g
LDFLAGS = `pkg-config --libs libusb-1.0`
CPPFLAGS = `pkg-config --cflags libusb-1.0`

CUPS_BACKEND_DIR = /usr/lib/cups/backend
CUPS_DATA_DIR = /usr/share/cups

BACKENDS = sonyupdr150 kodak6800 kodak1400 shinkos2145 canonselphy mitsu70x kodak605 dnpds40 citizencw01

DEPS = backend_common.h

SOURCES = backend_common.c $(addsuffix .c,$(addprefix backend_,$(BACKENDS)))

# CFLAGS += -DLIBUSB_PRE_1_0_10

all: $(EXEC_NAME) $(BACKENDS)

$(EXEC_NAME): $(SOURCES) $(DEPS)
	gcc -o $@ $(SOURCES) $(LDFLAGS) $(CFLAGS) $(CPPFLAGS) -DURI_PREFIX=\"$(BACKEND_NAME)\"

$(BACKENDS): $(EXEC_NAME)
	ln -sf $(EXEC_NAME) $@

cppcheck:
	cppcheck -q -v --std=c99 --enable=all -I/usr/include -DURI_PREFIX=\"$(BACKEND_NAME)\" $(SOURCES) 

install:	
	install -o root -m 700 $(EXEC_NAME) $(CUPS_BACKEND_DIR)/$(BACKEND_NAME)
	mkdir -p $(CUPS_DATA_DIR)/usb
	install -o root -m 644 blacklist $(CUPS_DATA_DIR)/usb/net.sf.gimp-print.usb-quirks

clean:
	rm -f $(EXEC_NAME) $(BACKENDS)
common: Ensure we properly define URI_PREFIX as part of the build. 2013-12-18 18:28:13 -05:00			`BACKEND_NAME = gutenprint52+usb`
build: Rename the executable to 'dyesub_backend' It gets renamed to 'gutenprint52+usb' when installed. 2014-01-22 08:35:12 -05:00			`EXEC_NAME = dyesub_backend`
common: Ensure we properly define URI_PREFIX as part of the build. 2013-12-18 18:28:13 -05:00
common: Clean up some gcc warnings (when -Wextra is used) 2013-07-26 16:18:35 -04:00			`CFLAGS = -Wall -Wextra -g`
Use proper pkgconfig libusb stuff. 2014-02-23 22:57:22 -05:00			LDFLAGS = `pkg-config --libs libusb-1.0`
Build: Further Makefile cleanup 2014-02-26 08:46:13 -05:00			CPPFLAGS = `pkg-config --cflags libusb-1.0`
[build] Add a makefile 2012-10-27 10:22:12 -04:00
Add kodak6800 to makefile. 2013-06-27 22:45:50 -04:00			`CUPS_BACKEND_DIR = /usr/lib/cups/backend`
blacklist: Add a quirks file for the CUPS 1.6.4+ or 1.7-rc2+ USB backend. This will blacklist all printers this backend supports. 2013-10-04 09:30:52 -04:00			`CUPS_DATA_DIR = /usr/share/cups`
unification: Rearrange internals quite a lot. Only Sony UP-DR150 driver is converted. Still to-do in common code: * Backend selection based on URI (ie CUPS mode) * Backend selection based on BACKEND or argv[0] (ie standalone mode) 2013-07-18 08:46:44 -04:00
cw01: Rename CW-01 backend to 'citizencw01' 2014-10-16 11:51:32 -04:00			`BACKENDS = sonyupdr150 kodak6800 kodak1400 shinkos2145 canonselphy mitsu70x kodak605 dnpds40 citizencw01`
s2145: Add a spooler for the Shinko/Sinfonia CHC-S2145. ...It doesn't work yet, something is wrong with the raw data xfer. 2013-07-06 10:14:06 -04:00
build: Clean up makefile a bit. 2013-11-16 17:33:13 -05:00			`DEPS = backend_common.h`
kodak6800: 75% of new backend migration completed. Main loop is all that's left. 2013-07-18 18:03:40 -04:00
build: Clean up makefile a bit. 2013-11-16 17:33:13 -05:00			`SOURCES = backend_common.c $(addsuffix .c,$(addprefix backend_,$(BACKENDS)))`
s2145: Migrate to new unified backend. UNTESTED. 2013-07-18 22:10:56 -04:00
build: libusb < 1.0.10 doesn't support libusb_get_version() 2014-03-11 10:31:59 -04:00			`# CFLAGS += -DLIBUSB_PRE_1_0_10`

build: Rename the executable to 'dyesub_backend' It gets renamed to 'gutenprint52+usb' when installed. 2014-01-22 08:35:12 -05:00			`all: $(EXEC_NAME) $(BACKENDS)`
s2145: Migrate to new unified backend. UNTESTED. 2013-07-18 22:10:56 -04:00
build: Rename the executable to 'dyesub_backend' It gets renamed to 'gutenprint52+usb' when installed. 2014-01-22 08:35:12 -05:00			`$(EXEC_NAME): $(SOURCES) $(DEPS)`
Build: Further Makefile cleanup 2014-02-26 08:46:13 -05:00			`gcc -o $@ $(SOURCES) $(LDFLAGS) $(CFLAGS) $(CPPFLAGS) -DURI_PREFIX=\"$(BACKEND_NAME)\"`
kodak6800: 75% of new backend migration completed. Main loop is all that's left. 2013-07-18 18:03:40 -04:00
build: Rename the executable to 'dyesub_backend' It gets renamed to 'gutenprint52+usb' when installed. 2014-01-22 08:35:12 -05:00			`$(BACKENDS): $(EXEC_NAME)`
			`ln -sf $(EXEC_NAME) $@`
mitsu70x: Add an experimental backend for the Mitsubishi CP-D70x series. This as of yet untested, but guinea pigs welcome. 2013-10-05 09:55:29 -04:00
Silence a pile of 'cppcheck' warnings. ...And fix a legitimate bug in the process! 2014-02-11 13:41:15 -05:00			`cppcheck:`
More cppcheck-driven fixes. Mainly a bunch of memory leaks. 2014-02-11 20:11:33 -05:00			`cppcheck -q -v --std=c99 --enable=all -I/usr/include -DURI_PREFIX=\"$(BACKEND_NAME)\" $(SOURCES)`
Silence a pile of 'cppcheck' warnings. ...And fix a legitimate bug in the process! 2014-02-11 13:41:15 -05:00
s2145: Rename helper to include manufacturer. 2013-07-06 11:03:49 -04:00			`install:`
build: Rename the executable to 'dyesub_backend' It gets renamed to 'gutenprint52+usb' when installed. 2014-01-22 08:35:12 -05:00			`install -o root -m 700 $(EXEC_NAME) $(CUPS_BACKEND_DIR)/$(BACKEND_NAME)`
blacklist: Add a quirks file for the CUPS 1.6.4+ or 1.7-rc2+ USB backend. This will blacklist all printers this backend supports. 2013-10-04 09:30:52 -04:00			`mkdir -p $(CUPS_DATA_DIR)/usb`
			`install -o root -m 644 blacklist $(CUPS_DATA_DIR)/usb/net.sf.gimp-print.usb-quirks`
[docs] Add some compilation and usage instructions. 2012-11-13 16:32:53 -05:00
			`clean:`
build: Rename the executable to 'dyesub_backend' It gets renamed to 'gutenprint52+usb' when installed. 2014-01-22 08:35:12 -05:00			`rm -f $(EXEC_NAME) $(BACKENDS)`