Merge a pile spelling fixes from Ville Skyttä <scop@sf>

backend_canonselphy.c

@@ -535,7 +535,7 @@ done:
 	return printer_type;
 }
 
-/* Private data stucture */
+/* Private data structure */
 struct canonselphy_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;
@@ -1166,7 +1166,7 @@ struct dyesub_backend canonselphy_backend = {
    08 00 03 00  [pg] 00 [pg2] [xx]  00 00 00 00   [? transitions to this]
    09 00 07 00  [pg] 00 [pg2] [xx]  00 00 00 00   [ready for C]
    09 00 00 00  [pg] 00 [pg2] 00  00 00 00 00   [? transitions to this]
-   0b 00 00 00  [pg] 00 [pg2] 00  00 00 00 00   [? transisions to this]
+   0b 00 00 00  [pg] 00 [pg2] 00  00 00 00 00   [? transitions to this]
    0c 00 00 00  [pg] 00 [pg2] 00  00 00 00 00   [? transitions to this]
    0f 00 00 00  [pg] 00 [pg2] 00  00 00 00 00   [? transitions to this]
    13 00 00 00  [pg] 00 [pg2] 00  00 00 00 00   [? transitions to this]

backend_canonselphyneo.c

@@ -58,7 +58,7 @@ struct selphyneo_readback {
 	uint8_t data[12];
 } __attribute((packed));
 
-/* Private data stucture */
+/* Private data structure */
 struct selphyneo_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;

backend_citizencw01.c

@@ -43,7 +43,7 @@
 #define USB_PID_CITIZEN_CW01 0x0002 // Maybe others?
 //#define USB_PID_OLMEC_OP900 XXXX
 
-/* Private data stucture */
+/* Private data structure */
 struct cw01_spool_hdr {
 	uint8_t  type; /* 0x00 -> 0x06 */
 	uint8_t  res; /* vertical resolution; 0x00 == 334dpi, 0x01 == 600dpi */
@@ -183,7 +183,7 @@ static char *cw01_statuses(char *str)
 		break;
 	}
 
-	return "Unkown Error";
+	return "Unknown Error";
 }
 
 static int cw01_do_cmd(struct cw01_ctx *ctx,

backend_common.c

@@ -503,7 +503,7 @@ static int print_scan_output(struct libusb_device *device,
 		if (serial) free(serial);
 		WARNING("**** THIS PRINTER DOES NOT REPORT A SERIAL NUMBER!\n");
 		WARNING("**** If you intend to use multiple printers of this type, you\n");
-		WARNING("**** must only plug one in at a time or unexpected behaivor will occur!\n");
+		WARNING("**** must only plug one in at a time or unexpected behavior will occur!\n");
 		serial = strdup("NONE_UNKNOWN");
 	}
 

backend_common.h

@@ -181,7 +181,7 @@ extern struct dyesub_backend BACKEND;
 #endif
 
 /* CUPS compatibility */
-#define CUPS_BACKEND_OK            0 /* Sucess */
+#define CUPS_BACKEND_OK            0 /* Success */
 #define CUPS_BACKEND_FAILED        1 /* Failed to print use CUPS policy */
 #define CUPS_BACKEND_AUTH_REQUIRED 2 /* Auth required */
 #define CUPS_BACKEND_HOLD          3 /* Hold this job only */

backend_dnpds40.c

@@ -64,7 +64,7 @@
 #define USB_PID_DNP_DS620 0x8b01
 #define USB_PID_DNP_DS820 0x9001
 
-/* Private data stucture */
+/* Private data structure */
 struct dnpds40_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;
@@ -369,7 +369,7 @@ static char *dnpds80_duplex_statuses(int status)
 		break;
 	}
 
-	return "Unkown Duplexer Error";
+	return "Unknown Duplexer Error";
 }
 
 static char *dnpds40_statuses(int status)

backend_kodak1400.c

@@ -74,7 +74,7 @@ struct kodak1400_hdr {
 } __attribute__((packed));
 
 
-/* Private data stucture */
+/* Private data structure */
 struct kodak1400_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;
@@ -648,7 +648,7 @@ struct dyesub_backend kodak1400_backend = {
   00 00 00 00     NULL
   XX              00 Glossy, 01 Matte   (Note: Kodak805 only supports Glossy)
   XX              01 to laminate, 00 to not.
-  01              Unkown, always set to 01
+  01              Unknown, always set to 01
   XX              Lamination Strength:
  
                   3c  Glossy

backend_kodak605.c

@@ -91,7 +91,7 @@ struct kodak605_media_list {
 struct kodak605_status {
 	struct kodak605_sts_hdr hdr;
 /*@10*/	uint32_t ctr_life;  /* Lifetime Prints */
-	uint32_t ctr_maint; /* Prints since last maintainence */
+	uint32_t ctr_maint; /* Prints since last maintenance */
 	uint32_t ctr_media; /* Prints on current media */
 	uint32_t ctr_cut;   /* Cutter Actuations */
 	uint32_t ctr_head;  /* Prints on current head */
@@ -164,7 +164,7 @@ static const char *kodak68xx_mediatypes(int type)
 
 #define CMDBUF_LEN 4
 
-/* Private data stucture */
+/* Private data structure */
 struct kodak605_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;

backend_kodak6800.c

@@ -221,7 +221,7 @@ struct kodak68x0_media_readback {
 
 #define CMDBUF_LEN 17
 
-/* Private data stucture */
+/* Private data structure */
 struct kodak6800_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;

backend_mitsu70x.c

@@ -124,7 +124,7 @@ typedef int (*send_image_dataFN)(struct BandImage *out, void *context,
 /* Max size of data chunk sent over */
 #define CHUNK_LEN (256*1024)
 
-/* Private data stucture */
+/* Private data structure */
 struct mitsu70x_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;

backend_mitsu9550.c

@@ -104,7 +104,7 @@ struct mitsu9550_cmd {
 	uint8_t cmd[4];
 } __attribute__((packed));
 
-/* Private data stucture */
+/* Private data structure */
 struct mitsu9550_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;

backend_mitsup95d.c

@@ -47,7 +47,7 @@
 #define USB_PID_MITSU_P93D  0x0398
 #define USB_PID_MITSU_P95D  0x3b10
 
-/* Private data stucture */
+/* Private data structure */
 struct mitsup95d_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;

backend_shinkos1245.c

@@ -400,7 +400,7 @@ struct shinkos1245_resp_matte {
 
 #define MATTE_MODE_MATTE 0x00
 
-/* Private data stucture */
+/* Private data structure */
 struct shinkos1245_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;
@@ -1537,7 +1537,7 @@ top:
 		cmd.mode = (ctx->hdr.mode & 0x3f) || ((ctx->hdr.dust & 0x3) << 6);
 		cmd.combo = ctx->hdr.method;
 
-		/* Issue print commmand */
+		/* Issue print command */
 		i = shinkos1245_do_cmd(ctx, &cmd, sizeof(cmd),
 				       &status1, sizeof(status1),
 				       &num);

backend_shinkos2145.c

@@ -90,7 +90,7 @@ struct s2145_printjob_hdr {
 	uint32_t unk21;
 } __attribute__((packed));
 
-/* Private data stucture */
+/* Private data structure */
 struct shinkos2145_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;
@@ -591,7 +591,7 @@ static char *error_str(uint8_t v) {
 	case ERROR_COMMS_TIMEOUT:
 		return "Main Communication Timeout";
 	case ERROR_MAINT_NEEDED:
-		return "Maintainence Needed";
+		return "Maintenance Needed";
 	case ERROR_BAD_COMMAND:
 		return "Inappropriate Command";
 	case ERROR_PRINTER:
@@ -878,7 +878,7 @@ static int get_status(struct shinkos2145_ctx *ctx)
 	INFO(" Print Counts:\n");
 	INFO("\tSince Paper Changed:\t%08u\n", le32_to_cpu(resp->count_paper));
 	INFO("\tLifetime:\t\t%08u\n", le32_to_cpu(resp->count_lifetime));
-	INFO("\tMaintainence:\t\t%08u\n", le32_to_cpu(resp->count_maint));
+	INFO("\tMaintenance:\t\t%08u\n", le32_to_cpu(resp->count_maint));
 	INFO("\tPrint Head:\t\t%08u\n", le32_to_cpu(resp->count_head));
 	INFO(" Cutter Actuations:\t%08u\n", le32_to_cpu(resp->count_cutter));
 	INFO(" Ribbon Remaining:\t%08u\n", le32_to_cpu(resp->count_ribbon_left));

backend_shinkos6145.c

@@ -259,7 +259,7 @@ struct shinkos6145_correctionparam {
 	uint8_t  pad[3948];       // @12436, null.
 } __attribute__((packed)); /* 16384 bytes */
 
-/* Private data stucture */
+/* Private data structure */
 struct shinkos6145_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;
@@ -781,7 +781,7 @@ static char *error_str(uint8_t v) {
 	case ERROR_COMMS_TIMEOUT:
 		return "Main Communication Timeout";
 	case ERROR_MAINT_NEEDED:
-		return "Maintainence Needed";
+		return "Maintenance Needed";
 	case ERROR_BAD_COMMAND:
 		return "Inappropriate Command";
 	case ERROR_PRINTER:
@@ -1195,7 +1195,7 @@ static int get_status(struct shinkos6145_ctx *ctx)
 	INFO(" Print Counts:\n");
 	INFO("\tSince Paper Changed:\t%08u\n", le32_to_cpu(resp->count_paper));
 	INFO("\tLifetime:\t\t%08u\n", le32_to_cpu(resp->count_lifetime));
-	INFO("\tMaintainence:\t\t%08u\n", le32_to_cpu(resp->count_maint));
+	INFO("\tMaintenance:\t\t%08u\n", le32_to_cpu(resp->count_maint));
 	INFO("\tPrint Head:\t\t%08u\n", le32_to_cpu(resp->count_head));
 	INFO(" Cutter Actuations:\t%08u\n", le32_to_cpu(resp->count_cutter));
 	INFO(" Ribbon Remaining:\t%08u\n", le32_to_cpu(resp->count_ribbon_left));
@@ -1230,7 +1230,7 @@ static int get_status(struct shinkos6145_ctx *ctx)
 		return -1;
 
 	INFO("Lifetime Distance:     %08u inches\n", le32_to_cpu(resp2->lifetime_distance));
-	INFO("Maintainence Distance: %08u inches\n", le32_to_cpu(resp2->maint_distance));
+	INFO("Maintenance Distance:  %08u inches\n", le32_to_cpu(resp2->maint_distance));
 	INFO("Head Distance:         %08u inches\n", le32_to_cpu(resp2->head_distance));
 	
 	/* Query various params */

backend_shinkos6245.c

@@ -90,7 +90,7 @@ struct s6245_printjob_hdr {
 	uint32_t unk21;
 } __attribute__((packed));
 
-/* Private data stucture */
+/* Private data structure */
 struct shinkos6245_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;
@@ -612,7 +612,7 @@ static char *error_str(uint8_t v) {
 	case ERROR_COMMS_TIMEOUT:
 		return "Main Communication Timeout";
 	case ERROR_MAINT_NEEDED:
-		return "Maintainence Needed";
+		return "Maintenance Needed";
 	case ERROR_BAD_COMMAND:
 		return "Inappropriate Command";
 	case ERROR_PRINTER:
@@ -1003,7 +1003,7 @@ static int get_status(struct shinkos6245_ctx *ctx)
 	INFO(" Print Counts:\n");
 	INFO("\tSince Paper Changed:\t%08u\n", le32_to_cpu(resp->count_paper));
 	INFO("\tLifetime:\t\t%08u\n", le32_to_cpu(resp->count_lifetime));
-	INFO("\tMaintainence:\t\t%08u\n", le32_to_cpu(resp->count_maint));
+	INFO("\tMaintenance:\t\t%08u\n", le32_to_cpu(resp->count_maint));
 	INFO("\tPrint Head:\t\t%08u\n", le32_to_cpu(resp->count_head));
 	INFO(" Cutter Actuations:\t%08u\n", le32_to_cpu(resp->count_cutter));
 	INFO(" Ribbon Remaining:\t%08u\n", le32_to_cpu(resp->count_ribbon_left));
@@ -1038,7 +1038,7 @@ static int get_status(struct shinkos6245_ctx *ctx)
 		return 0;
 
 	INFO("Lifetime Distance: %08u inches\n", le32_to_cpu(resp2->lifetime_distance));
-	INFO("Maintainence Distance: %08u inches\n", le32_to_cpu(resp2->maint_distance));
+	INFO("Maintenance Distance: %08u inches\n", le32_to_cpu(resp2->maint_distance));
 	INFO("Head Distance: %08u inches\n", le32_to_cpu(resp2->head_distance));
 
 	return 0;

backend_sonyupdr150.c

@@ -45,7 +45,7 @@
 #define USB_PID_SONY_UPDR200 0x035F
 #define USB_PID_SONY_UPCR10  0x0226
 
-/* Private data stucture */
+/* Private data structure */
 struct updr150_ctx {
 	struct libusb_device_handle *dev;
 	uint8_t endp_up;