mitsu: Preliminary support for the Mitsubishi CP30DW MedSci model.

Need the USB PID, plus some sniffs to figure out readback codes.
master
Solomon Peachy 3 years ago
parent 0737fa32a0
commit 7ff5c6be62
  1. 26
      README
  2. 1
      backend_common.h
  3. 51
      backend_mitsu9550.c

@ -86,9 +86,10 @@
Kodak 6900
Kodak 7010 / 7015
Magicard Rio 2E (and other Magicard models)
Mitsubishi CP-3020D/DE and CP-3020DA/DAE
Mitsubishi CP-9000DW, CP-9500DW, and CP-9600DW-S
Mitsubishi CP-9800DW, CP-9800DW-S, CP-9810DW, and CP-9820DW-S
Mitsubishi CP30DW
Mitsubishi CP3020D/DE and CP3020DA/DAE
Mitsubishi CP9000DW, CP9500DW, and CP9600DW-S
Mitsubishi CP9800DW, CP9800DW-S, CP9810DW, and CP9820DW-S
Mitsubishi CP-M15
Olmec OP900
Shinko CHC-S2245 (aka Sinfonia S3)
@ -1039,24 +1040,25 @@
Supported and tested printers:
Mitsubishi CP-9550D/DW and CP-9550DZ/DZS/DW-S
Mitsubishi CP-9600D/DW
Mitsubishi CP-9800DZ/DZS/DW-S [1]
Mitsubishi CP9550D/DW and CP9550DZ/DZS/DW-S
Mitsubishi CP9600D/DW
Mitsubishi CP9800DZ/DZS/DW-S [1]
Unverified/untested, but should work: (let us know, please!)
Mitsubishi CP-9800D/DW [1]
Mitsubishi CP-9810D/DW [1]
Mitsubishi CP-9820DW-S [1]
Mitsubishi CP9800D/DW [1]
Mitsubishi CP9810D/DW [1]
Mitsubishi CP9820DW-S [1]
Work-in-progress printers:
Mitsubishi CP-9000D/DW
Mitsubishi CP-9500D/DW
Mitsubishi CP9000D/DW
Mitsubishi CP9500D/DW
Unsupported (unknown VID/PID):
Mitsubishi CP-9600DW-S/DZ/DZ-S
Mitsubishi CP30DW
Mitsubishi CP9600DW-S/DZ/DZ-S
Valid commands:

@ -149,6 +149,7 @@ enum {
P_MITSU_M1,
P_MITSU_P93D,
P_MITSU_P95D,
P_MITSU_CP30D,
P_SHINKO_S1245,
P_SHINKO_S2145,
P_SHINKO_S2245,

@ -49,6 +49,7 @@
#define USB_PID_MITSU_98__D 0x3B21
//#define USB_PID_MITSU_9810D XXXXXX
//#define USB_PID_MITSU_9820DS XXXXXX
//#define USB_PID_MITSU_CP30D XXXXXX
/* Spool file structures */
@ -133,6 +134,7 @@ struct mitsu9550_ctx {
int type;
int is_s;
int is_98xx;
int footer_len;
struct marker marker;
@ -305,6 +307,11 @@ static int mitsu9550_attach(void *vctx, struct libusb_device_handle *dev, int ty
WARNING("Dynamic library support not loaded, will be unable to print.");
}
if (ctx->type == P_MITSU_CP30D)
ctx->footer_len = 6;
else
ctx->footer_len = 4;
if (test_mode < TEST_MODE_NOATTACH) {
if (mitsu9550_get_status(ctx, (uint8_t*) &media, 0, 0, 1))
return CUPS_BACKEND_FAILED;
@ -554,7 +561,7 @@ hdr_done:
- Additional block header (12B)
- Job footer (4B)
*/
i = read(data_fd, buf, 4);
i = read(data_fd, buf, ctx->footer_len);
if (i == 0) {
mitsu9550_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
@ -569,8 +576,8 @@ hdr_done:
plane->cmd[1] == 0x50 &&
plane->cmd[3] == 0x00) {
/* store it in the buffer */
memcpy(job->databuf + job->datalen, buf, 4);
job->datalen += 4;
memcpy(job->databuf + job->datalen, buf, ctx->footer_len);
job->datalen += ctx->footer_len;
/* Unless we have a raw matte plane following,
we're done */
@ -580,7 +587,7 @@ hdr_done:
remain = sizeof(buf);
} else {
/* It's part of a block header, mark what we've read */
remain = sizeof(buf) - 4;
remain = sizeof(buf) - ctx->footer_len;
}
/* Read in the rest of the header */
@ -883,6 +890,13 @@ static int validate_media(int type, int media, int cols, int rows)
break;
}
break;
case P_MITSU_CP30D:
if (cols != 1600)
return 1;
// XXX validate media type vs job size. Don't know readback codes.
// S == 1600x1200
// L == 1600x2100
break;
default:
WARNING("Unknown printer type %d\n", type);
break;
@ -1003,7 +1017,7 @@ static int mitsu9550_main_loop(void *vctx, const void *vjob) {
free(convbuf);
/* And finally, the job footer. */
memcpy(newbuf + newlen, job->databuf + sizeof(struct mitsu9550_plane) + planelen/2 * 3, sizeof(struct mitsu9550_cmd));
memcpy(newbuf + newlen, job->databuf + sizeof(struct mitsu9550_plane) + planelen/2 * 3, ctx->footer_len);
newlen += sizeof(struct mitsu9550_cmd);
/* Clean up, and move pointer to new buffer; */
@ -1197,9 +1211,9 @@ top:
} else {
/* Send from spool file */
if ((ret = send_data(ctx->dev, ctx->endp_down,
ptr, sizeof(cmd))))
ptr, ctx->footer_len)))
return CUPS_BACKEND_FAILED;
ptr += sizeof(cmd);
ptr += ctx->footer_len;
}
/* Don't forget the 9810's matte plane */
@ -1478,7 +1492,7 @@ static const char *mitsu9550_prefixes[] = {
/* Exported */
struct dyesub_backend mitsu9550_backend = {
.name = "Mitsubishi CP9xxx family",
.version = "0.52" " (lib " LIBMITSU_VER ")",
.version = "0.53" " (lib " LIBMITSU_VER ")",
.uri_prefixes = mitsu9550_prefixes,
.cmdline_usage = mitsu9550_cmdline,
.cmdline_arg = mitsu9550_cmdline_arg,
@ -1508,14 +1522,15 @@ struct dyesub_backend mitsu9550_backend = {
{ USB_VID_MITSU, USB_PID_MITSU_98__D, P_MITSU_9810, NULL, "mitsubishi-9810d"}, /* Duplicate */
// { USB_VID_MITSU, USB_PID_MITSU_9810D, P_MITSU_9810, NULL, "mitsubishi-9810dw"},
// { USB_VID_MITSU, USB_PID_MITSU_9820DS, P_MITSU_9820S, NULL, "mitsubishi-9820dw-s"},
// { USB_VID_MITSU, USB_PID_MITSU_CP30D, P_MITSU_CP30D, NULL, "mitsubishi-cp30dw"},
{ 0, 0, 0, NULL, NULL}
}
};
/* Mitsubish CP-9500/9550/9600/9800/9810/9820 spool format:
/* Mitsubish CP-30/9500/9550/9600/9800/9810/9820 spool format:
Spool file consists of 3 (or 4) 50-byte headers, followed by three
image planes, each with a 12-byte header, then a 4-byte footer.
Spool file consists of 3 or 4 50-byte headers, followed by three
image planes, each with a 12-byte header, then a 4 or 6-byte footer.
All multi-byte numbers are big endian.
@ -1529,14 +1544,14 @@ struct dyesub_backend mitsu9550_backend = {
~~~ Header 2
1b 57 21 2e 00 80 00 22 QQ QQ 00 00 00 00 00 00 :: ZZ ZZ = num copies (>= 0x01)
00 00 00 00 00 00 00 00 00 00 00 00 ZZ ZZ 00 00 :: YY = 00/80 Fine/SuperFine (9550), 10/80 Fine/Superfine (98x0), 00 (9600)
00 00 00 00 00 00 00 00 00 00 00 00 ZZ ZZ 00 00 :: YY = 00/80 Fine/SuperFine (9550), 10/80 Fine/Superfine (98x0), 00 (9600), 0x80/0x00 Powersave/Normal (CP30)
XX 00 00 00 00 00 YY 00 00 00 00 00 00 00 SS TT :: XX = 00 normal, 83 Cut 2x6 (9550 only!)
RR 01 :: QQ QQ = 0x0803 on 9550, 0x0801 on 98x0, 0x0003 on 9600, 0xa803 on 9500
RR 01 :: QQ QQ = 0x0803 on 9550, 0x0801 on 98x0, 0x0003 on 9600, 0xa803 on 9500, 0x0802 on CP30
:: RR = 01 for "use LUT" on 98xx, 0x00 otherwise. Extension to stock.
:: TT = 01 for "already reversed". Extension to stock.
:: SS == sharpening level, 0 for off, 1-10 otherwise. Extesion to stock.
~~~ Header 3 (9550 and 9800-S only..)
~~~ Header 3 (9550, 9800-S, and CP30 only..)
1b 57 22 2e 00 QQ 00 00 00 00 00 XX 00 00 00 00 :: XX = 00 normal, 01 FineDeep
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 :: QQ = 0xf0 on 9500, 0x40 on the rest
@ -1545,10 +1560,13 @@ struct dyesub_backend mitsu9550_backend = {
~~~ Header 4 (all but 9550-S and 9800-S, involves error policy?)
1b 57 26 2e 00 QQ 00 00 00 00 00 SS RR 01 00 00 :: QQ = 0x70 on 9550/98x0, 0x60 on 9600 or 9800S
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 :: RR = 0x01 on 9550/98x0, 0x00 on 9600
1b 57 26 2e 00 QQ TT 00 00 00 00 SS RR 01 VV WW :: QQ = 0x70 on 9550/98x0, 0x60 on 9600 or 9800S, 0x3f on CP30
WW 00 WW 00 00 00 00 00 00 00 00 00 00 00 00 00 :: RR = 0x01 on 9550/98x0/CP30, 0x00 on 9600
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 :: SS = 0x01 on 9800S, 0x00 otherwise.
00 00
:: TT = 0x80 on CP30, 0x00 otherwise
:: VV = 0x80 on CP30, 0x00 otherwise
:: WW = 0x10 on CP30, 0x00 otherwise
~~~~ Data follows:
@ -1581,6 +1599,7 @@ struct dyesub_backend mitsu9550_backend = {
1b 50 4e 00 (9800-S)
1b 50 51 00 (CP3020DA)
1b 50 57 00 (9500)
1b 5a 52 00 00 00 (CP30)
Unknown: 9600-S, 9820-S, 1 other..

Loading…
Cancel
Save