From 9b3f7cbb66548f92555c590a5644f368adc8999f Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Thu, 2 Jul 2015 23:32:16 -0400 Subject: [PATCH] s6245: Add a preliminary backend for the Shinko S6245 --- Makefile | 2 +- README | 53 +- backend_common.c | 3 +- backend_common.h | 2 + backend_shinkos6245.c | 1807 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 1858 insertions(+), 9 deletions(-) create mode 100644 backend_shinkos6245.c diff --git a/Makefile b/Makefile index ef832de..a6647d7 100644 --- a/Makefile +++ b/Makefile @@ -8,7 +8,7 @@ CPPFLAGS = `pkg-config --cflags libusb-1.0` CUPS_BACKEND_DIR = /usr/lib/cups/backend CUPS_DATA_DIR = /usr/share/cups -BACKENDS = sonyupdr150 kodak6800 kodak1400 shinkos2145 shinkos1245 canonselphy mitsu70x kodak605 dnpds40 citizencw01 mitsu9550 +BACKENDS = sonyupdr150 kodak6800 kodak1400 shinkos2145 shinkos1245 canonselphy mitsu70x kodak605 dnpds40 citizencw01 mitsu9550 shinkos6245 DEPS = backend_common.h diff --git a/README b/README index d274a2e..5af1ebc 100644 --- a/README +++ b/README @@ -257,13 +257,6 @@ Shinko CHC-S2145 (aka "Sinfonia S2") - Work-in-process printers: - - Shinko CHC-S6245 (aka "Sinfonia CE1") - Shinko CHC-S6145 (aka "Sinfonia CS2") - Shinko CHC-S6145-5A (aka "Sinfonia CS2-c") - Ciaat Brava 21 - Development was initially sponsored by: LiveLink Technology [ www.livelinktechnology.net ] @@ -352,6 +345,52 @@ Values are unsigned 16-bit big endian, between 0 and 16383 (ie only 14 bits used) + *************************************************************************** + BACKEND=shinkos6245 + + Low-level documentation was provided by Sinfonia, Inc. Thank you! + + Work-in-process printers: + + Shinko CHC-S6245 (aka "Sinfonia CE1") + + Valid commands: + + -c filename Query User tone curve from flash [1] + -C filename Store User tone curve in flash [1] + -e Query Error log + -f Enable Fast return from prints [2] + -F Flash printer LEDs for 5 seconds + -i Query printer firmware information + -l filename Query Current tone curve from RAM [1] + -L filename Store Current tone curve in RAM [1] + -m Query media information + -r Reset User tone curve to default [4] + -R Reset printer to factory defaults + -s Query printer status + -X id Cancel print job 'id' [3] + + Notes: + + [1] Format of curvedata file: + + 256 entries each of Yellow, Magenta, Cyan mappings: + Values are unsigned 16-bit big endian, between 0 and 2047 + (ie only 11 bits used) + + [2] This terminates the backend as soon as the printer has acknowledged + the print job, without waiting for the print job to complete. + This can also be enabled by setting the 'FAST_RETURN' environment + variable. This is the default behavior when using this backend + with CUPS. + + [3] Job ID is the Internal Job ID (reported via status) + This cancels a multi-copy print job. + To see which jobs are active/pending, see the output of the + '-s' command, specifically the 'Bank' output. + + [4] Default printer tone curve is a linear 'val << 3' + *************************************************************************** BACKEND=sonyupdr150 diff --git a/backend_common.c b/backend_common.c index 9498e1d..2766874 100644 --- a/backend_common.c +++ b/backend_common.c @@ -543,8 +543,9 @@ static struct dyesub_backend *backends[] = { &kodak6800_backend, &kodak605_backend, &kodak1400_backend, - &shinkos1245_backend, + &shinkos1245_backend, &shinkos2145_backend, + &shinkos6245_backend, &updr150_backend, &mitsu70x_backend, &mitsu9550_backend, diff --git a/backend_common.h b/backend_common.h index 7248941..f7d56a0 100644 --- a/backend_common.h +++ b/backend_common.h @@ -102,6 +102,7 @@ enum { P_KODAK_605, P_SHINKO_S2145, P_SHINKO_S1245, + P_SHINKO_S6245, P_SONY_UPDR150, P_SONY_UPCR10, P_MITSU_D70X, @@ -156,6 +157,7 @@ extern struct dyesub_backend kodak605_backend; extern struct dyesub_backend kodak1400_backend; extern struct dyesub_backend shinkos1245_backend; extern struct dyesub_backend shinkos2145_backend; +extern struct dyesub_backend shinkos6245_backend; extern struct dyesub_backend canonselphy_backend; extern struct dyesub_backend mitsu70x_backend; extern struct dyesub_backend mitsu9550_backend; diff --git a/backend_shinkos6245.c b/backend_shinkos6245.c new file mode 100644 index 0000000..406f7d4 --- /dev/null +++ b/backend_shinkos6245.c @@ -0,0 +1,1807 @@ +/* + * Shinko/Sinfonia CHC-S6245 CUPS backend -- libusb-1.0 version + * + * (c) 2013-2015 Solomon Peachy + * + * Low-level documentation was provided by Sinfonia, Inc. Thank you! + * + * The latest version of this program can be found at: + * + * http://git.shaftnet.org/cgit/selphy_print.git + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 3 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * [http://www.gnu.org/licenses/gpl-3.0.html] + * + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "backend_common.h" + + +enum { + S_IDLE = 0, + S_PRINTER_READY_CMD, + S_PRINTER_SENT_DATA, + S_FINISHED, +}; + +/* Structure of printjob header. All fields are LITTLE ENDIAN */ +struct s6245_printjob_hdr { + uint32_t len1; /* Fixed at 0x10 */ + uint32_t model; /* Equal to the printer model (eg '6245' or '1245' decimal) */ + uint32_t unk2; + uint32_t unk3; /* Fixed at 0x01 */ + + uint32_t len2; /* Fixed at 0x64 */ + uint32_t unk5; + uint32_t media; // 8x4->8x12 + uint32_t unk6; + + uint32_t unk7; + uint32_t unk7a; + uint32_t oc_mode; /* 6145/6245 only, Matte/Glossy/None */ + uint32_t unk8; + + uint32_t unk9; + uint32_t columns; + uint32_t rows; + uint32_t copies; + + uint32_t unk10; + uint32_t unk11; + uint32_t unk12; + uint32_t unk13; + + uint32_t unk14; + uint32_t unk15; + uint32_t dpi; /* Fixed at '300' (decimal) */ + uint32_t unk16; + + uint32_t unk17; + uint32_t unk18; + uint32_t unk19; + uint32_t unk20; + + uint32_t unk21; +} __attribute__((packed)); + +/* Private data stucture */ +struct shinkos6245_ctx { + struct libusb_device_handle *dev; + uint8_t endp_up; + uint8_t endp_down; + uint8_t jobid; + uint8_t fast_return; + + struct s6245_printjob_hdr hdr; + + uint8_t *databuf; + int datalen; +}; + +/* Structs for printer */ +struct s6245_cmd_hdr { + uint16_t cmd; + uint16_t len; /* Not including this header */ +} __attribute__((packed)); + +#define S6245_CMD_GETSTATUS 0x0001 +#define S6245_CMD_MEDIAINFO 0x0002 +#define S6245_CMD_ERRORLOG 0x0004 +#define S6245_CMD_GETPARAM 0x0005 +#define S6245_CMD_GETSERIAL 0x0006 +#define S6245_CMD_PRINTSTAT 0x0007 +#define S6245_CMD_EXTCOUNTER 0x0008 + +#define S6245_CMD_PRINTJOB 0x4001 +#define S6245_CMD_CANCELJOB 0x4002 +#define S6245_CMD_FLASHLED 0x4003 +#define S6245_CMD_RESET 0x4004 +#define S6245_CMD_READTONE 0x4005 +#define S6245_CMD_SETPARAM 0x4007 + +#define S6245_CMD_GETEEPROM 0x400E +#define S6245_CMD_SETEEPROM 0x400F +#define S6245_CMD_TIMESET 0x4011 + +#define S6245_CMD_FWINFO 0xC003 +#define S6245_CMD_UPDATE 0xC004 + +static char *cmd_names(uint16_t v) { + switch (le16_to_cpu(v)) { + case S6245_CMD_GETSTATUS: + return "Get Status"; + case S6245_CMD_MEDIAINFO: + return "Get Media Info"; + case S6245_CMD_ERRORLOG: + return "Get Error Log"; + case S6245_CMD_GETPARAM: + return "Get Parameter"; + case S6245_CMD_GETSERIAL: + return "Get Serial Number"; + case S6245_CMD_PRINTSTAT: + return "Get Print ID Status"; + case S6245_CMD_EXTCOUNTER: + return "Get Extended Counters"; + case S6245_CMD_PRINTJOB: + return "Print"; + case S6245_CMD_CANCELJOB: + return "Cancel Print"; + case S6245_CMD_FLASHLED: + return "Flash LEDs"; + case S6245_CMD_RESET: + return "Reset"; + case S6245_CMD_READTONE: + return "Read Tone Curve"; + case S6245_CMD_SETPARAM: + return "Set Parameter"; + case S6245_CMD_GETEEPROM: + return "Get EEPROM Backup Parameter"; + case S6245_CMD_SETEEPROM: + return "Set EEPROM Backup Parameter"; + case S6245_CMD_TIMESET: + return "Time Setting"; + case S6245_CMD_FWINFO: + return "Get Firmware Info"; + case S6245_CMD_UPDATE: + return "Update"; + default: + return "Unknown Command"; + } +}; + +struct s6245_print_cmd { + struct s6245_cmd_hdr hdr; + uint8_t id; + uint16_t count; + uint16_t columns; + uint16_t rows; + uint8_t reserved[2]; + uint8_t mode; + uint8_t method; + uint8_t reserved2; +} __attribute__((packed)); + +#define PRINT_MODE_NO_OC 0x01 +#define PRINT_MODE_GLOSSY 0x02 +#define PRINT_MODE_MATTE 0x03 + +#if 0 +static char *print_modes(uint8_t v) { + switch (v) { + case PRINT_MODE_NO_OC: + return "No Overcoat"; + case PRINT_MODE_GLOSSY: + return "Glossy"; + case PRINT_MODE_MATTE: + return "Matte"; + default: + return "Unknown"; + } +} +#endif + +#define PRINT_METHOD_STD 0x00 +#define PRINT_METHOD_COMBO_2 0x02 +#define PRINT_METHOD_COMBO_3 0x03 + +#define PRINT_METHOD_DISABLE_ERR 0x10 + +static char *print_methods (uint8_t v) { + switch (v & 0xf) { + case PRINT_METHOD_STD: + return "Standard"; + case PRINT_METHOD_COMBO_2: + return "2up"; + case PRINT_METHOD_COMBO_3: + return "3up"; + default: + return "Unknown"; + } +} + +struct s6245_cancel_cmd { + struct s6245_cmd_hdr hdr; + uint8_t id; +} __attribute__((packed)); + +struct s6245_reset_cmd { + struct s6245_cmd_hdr hdr; + uint8_t target; + uint8_t curveid; +} __attribute__((packed)); + +#define RESET_PRINTER 0x03 +#define RESET_TONE_CURVE 0x04 + +#define TONE_CURVE_ID 0x01 + +struct s6245_readtone_cmd { + struct s6245_cmd_hdr hdr; + uint8_t target; + uint8_t curveid; +} __attribute__((packed)); + +#define READ_TONE_CURVE_USER 0x01 +#define READ_TONE_CURVE_CURR 0x02 + +struct s6245_setparam_cmd { + struct s6245_cmd_hdr hdr; + uint8_t target; + uint32_t param; +} __attribute__((packed)); + +#define PARAM_DRIVER_MODE 0x3e +#define PARAM_PAPER_MODE 0x3f +#define PARAM_SLEEP_TIME 0x54 + +#define PARAM_DRIVER_WIZOFF 0x00000000 +#define PARAM_DRIVER_WIZON 0x00000001 + +#define PARAM_PAPER_NOCUT 0x00000000 +#define PARAM_PAPER_CUTLOAD 0x00000001 + +#define PARAM_SLEEP_5MIN 0x00000000 +#define PARAM_SLEEP_15MIN 0x00000001 +#define PARAM_SLEEP_30MIN 0x00000002 +#define PARAM_SLEEP_60MIN 0x00000003 +#define PARAM_SLEEP_120MIN 0x00000004 +#define PARAM_SLEEP_240MIN 0x00000005 + +struct s6245_seteeprom_cmd { + struct s6245_cmd_hdr hdr; + uint8_t data[256]; /* Maxlen */ +} __attribute__((packed)); + +struct s6245_settime_cmd { + struct s6245_cmd_hdr hdr; + uint8_t enable; /* 0 or 1 */ + uint8_t second; + uint8_t minute; + uint8_t hour; + uint8_t day; + uint8_t month; + uint8_t year; +} __attribute__((packed)); + +struct s6245_errorlog_cmd { + struct s6245_cmd_hdr hdr; + uint16_t index; /* 0 is latest */ +} __attribute__((packed)); + +struct s6245_getparam_cmd { + struct s6245_cmd_hdr hdr; + uint8_t target; +} __attribute__((packed)); + +struct s6245_getprintidstatus_cmd { + struct s6245_cmd_hdr hdr; + uint8_t id; +} __attribute__((packed)); + +struct s6245_fwinfo_cmd { + struct s6245_cmd_hdr hdr; + uint8_t target; +} __attribute__((packed)); + +#define FWINFO_TARGET_MAIN_BOOT 0x01 +#define FWINFO_TARGET_MAIN_APP 0x02 +#define FWINFO_TARGET_PRINT_TABLES 0x03 +#define FWINFO_TARGET_DSP 0x04 + +static char *fwinfo_targets (uint8_t v) { + switch (v) { + case FWINFO_TARGET_MAIN_BOOT: + return "Main Boot "; + case FWINFO_TARGET_MAIN_APP: + return "Main App "; + case FWINFO_TARGET_DSP: + return "DSP "; + case FWINFO_TARGET_PRINT_TABLES: + return "Print Tables"; + default: + return "Unknown "; + } +} + +struct s6245_update_cmd { + struct s6245_cmd_hdr hdr; + uint8_t target; + uint8_t curve_id; + uint8_t reset; // ?? + uint8_t reserved[3]; + uint32_t size; +} __attribute__((packed)); + +#define UPDATE_TARGET_USER 0x03 +#define UPDATE_TARGET_CURRENT 0x04 + +static char *update_targets (uint8_t v) { + switch (v) { + case UPDATE_TARGET_USER: + return "User"; + case UPDATE_TARGET_CURRENT: + return "Current"; + default: + return "Unknown"; + } +} + +#define UPDATE_SIZE 0x600 +/* Update is three channels, Y, M, C; + each is 256 entries of 11-bit data padded to 16-bits. + Printer expects LE data. We use BE data on disk. +*/ + +struct s6245_status_hdr { + uint8_t result; + uint8_t error; + uint8_t printer_major; + uint8_t printer_minor; + uint8_t reserved[2]; + uint8_t mode; + uint8_t status; + uint16_t payload_len; +} __attribute__((packed)); + +#define RESULT_SUCCESS 0x01 +#define RESULT_FAIL 0x02 + +#define ERROR_NONE 0x00 +#define ERROR_INVALID_PARAM 0x01 +#define ERROR_MAIN_APP_INACTIVE 0x02 +#define ERROR_COMMS_TIMEOUT 0x03 +#define ERROR_MAINT_NEEDED 0x04 +#define ERROR_BAD_COMMAND 0x05 +#define ERROR_PRINTER 0x11 +#define ERROR_BUFFER_FULL 0x21 + +static char *error_codes(uint8_t major, uint8_t minor) +{ + switch(major) { + case 0x01: /* "Controller Error" */ + switch(minor) { + case 0x01: + return "Controller: EEPROM Write Timeout"; + case 0x09: + return "Controller: DSP FW Boot"; + case 0x0A: + return "Controller: Invalid Print Parameter Table"; + case 0x0B: + return "Controller: DSP FW Mismatch"; + case 0x0C: + return "Controller: Print Parameter Table Mismatch"; + case 0x0D: + return "Controller: FPGA Configuration Failed"; + case 0x0F: + return "Controller: Main FW Checksum"; + case 0x10: + return "Controller: Flash Write Failed"; + case 0x11: + return "Controller: DSP Checksum"; + case 0x12: + return "Controller: DSP FW Write Failed"; + case 0x13: + return "Controller: Print Parameter Table Checksum"; + case 0x14: + return "Controller: Print Parameter Table Write Failed"; + case 0x15: + return "Controller: User Tone Curve Write Failed"; + case 0x16: + return "Controller: MSP Communication"; + case 0x17: + return "Controller: THV Autotuning"; + case 0x18: + return "Controller: THV Value Out of Range"; + case 0x19: + return "Controller: Thermal Head"; + case 0x1B: + return "Controller: DSP Communication"; + case 0x1C: + return "Controller: DSP DMA Failed"; + default: + return "Controller: Unknown"; + } + case 0x02: /* "Mechanical Error" */ + switch (minor) { + case 0x01: + return "Mechanical: Pinch Head Home"; + case 0x02: + return "Mechanical: Pinch Head (position 1)"; + case 0x03: + return "Mechanical: Pinch Head (position 2)"; + case 0x04: + return "Mechanical: Pinch Head (position 3)"; + case 0x0B: + return "Mechanical: Cutter (Right)"; + case 0x0C: + return "Mechanical: Cutter (Left)"; + default: + return "Mechanical: Unknown"; + } + case 0x03: /* "Sensor Error" */ + switch (minor) { + case 0x01: + return "Sensor: Head Up"; + case 0x02: + return "Sensor: Head Down"; + case 0x0B: + return "Sensor: Cutter Left"; + case 0x0C: + return "Sensor: Cutter Right"; + case 0x0D: + return "Sensor: Cutter Left+Right"; + case 0x15: + return "Sensor: Head Up Unstable"; + case 0x16: + return "Sensor: Head Down Unstable"; + case 0x17: + return "Sensor: Cutter Left Unstable"; + case 0x18: + return "Sensor: Cutter Right Unstable"; + case 0x19: + return "Sensor: Cover Open Unstable"; + case 0x1E: + return "Sensor: Ribbon Mark (Cyan)"; + case 0x1F: + return "Sensor: Ribbon Mark (OC)"; + default: + return "Sensor: Unknown"; + } + case 0x04: /* "Temperature Sensor Error" */ + switch (minor) { + case 0x01: + return "Temp Sensor: Thermal Head Low"; + case 0x02: + return "Temp Sensor: Thermal Head High"; + case 0x05: + return "Temp Sensor: Environment Low"; + case 0x06: + return "Temp Sensor: Environment High"; + case 0x07: + return "Temp Sensor: Preheat"; + case 0x08: + return "Temp Sensor: Thermal Protect"; + default: + return "Temp Sensor: Unknown"; + } + case 0x5: /* "Paper Jam" */ + switch (minor) { + case 0x01: + return "Paper Jam: Loading Paper Top On"; + case 0x02: + return "Paper Jam: Loading Print Position On"; + case 0x03: + return "Paper Jam: Loading Print Position Off"; + case 0x04: + return "Paper Jam: Loading Paper Top Off"; + case 0x05: + return "Paper Jam: Loading Cut Print Position Off"; + case 0x0C: + return "Paper Jam: Initializing Print Position Off"; + case 0x0D: + return "Paper Jam: Initializing Print Position On"; + case 0x15: + return "Paper Jam: Printing Print Position Off"; + case 0x16: + return "Paper Jam: Printing Paper Top On"; + case 0x17: + return "Paper Jam: Printing Paper Top Off"; + case 0x1F: + return "Paper Jam: Precut Print Position Off"; + case 0x20: + return "Paper Jam: Precut Print Position On"; + + case 0x29: + return "Paper Jam: Printing Paper Top On"; + case 0x2A: + return "Paper Jam: Printing Pre-Yellow Print Position Off"; + case 0x2B: + return "Paper Jam: Printing Yellow Print Position Off"; + case 0x2C: + return "Paper Jam: Printing Yellow Print Position On"; + case 0x2D: + return "Paper Jam: Printing Pre-Magenta Print Position Off"; + case 0x2E: + return "Paper Jam: Printing Magenta Print Position On"; + case 0x2F: + return "Paper Jam: Printing Magenta Print Position Off"; + case 0x30: + return "Paper Jam: Printing Pre-Cyan Print Position Off"; + case 0x31: + return "Paper Jam: Printing Cyan Print Position On"; + case 0x32: + return "Paper Jam: Printing Cyan Print Position Off"; + case 0x33: + return "Paper Jam: Printing Pre-OC Print Position Off"; + case 0x34: + return "Paper Jam: Printing OC Print Position On"; + case 0x35: + return "Paper Jam: Printing OC Print Position Off"; + case 0x36: + return "Paper Jam: Cut Print Position Off"; + case 0x37: + return "Paper Jam: Home Position Off"; + case 0x38: + return "Paper Jam: Paper Top Off"; + case 0x39: + return "Paper Jam: Print Position On"; + + case 0x51: + return "Paper Jam: Paper Empty On, Top On, Position On"; + case 0x52: + return "Paper Jam: Paper Empty On, Top On, Position Off"; + case 0x53: + return "Paper Jam: Paper Empty On, Top Off, Print Position On"; + case 0x54: + return "Paper Jam: Paper Empty On, Top Of, Position Off"; + case 0x55: + return "Paper Jam: Paper Empty Off, Top On, Position On"; + case 0x56: + return "Paper Jam: Paper Empty Off, Top On, Position Off"; + case 0x57: + return "Paper Jam: Paper Empty Off, Top Off, Position On"; + case 0x60: + return "Paper Jam: Cutter Right"; + case 0x61: + return "Paper Jam: Cutter Left"; + + default: + return "Paper Jam: Unknown"; + } + case 0x06: /* User Error */ + switch (minor) { + case 0x01: + return "Drawer Unit Open"; + case 0x02: + return "Incorrect Ribbon"; + case 0x03: + return "No/Empty Ribbon"; + case 0x04: + return "Mismatched Ribbon"; + case 0x08: + return "No Paper"; + case 0x0C: + return "Paper End"; + default: + return "Unknown"; + } + default: + return "Unknown"; + } +} + +static char *error_str(uint8_t v) { + switch (v) { + case ERROR_NONE: + return "None"; + case ERROR_INVALID_PARAM: + return "Invalid Command Parameter"; + case ERROR_MAIN_APP_INACTIVE: + return "Main App Inactive"; + case ERROR_COMMS_TIMEOUT: + return "Main Communication Timeout"; + case ERROR_MAINT_NEEDED: + return "Maintainence Needed"; + case ERROR_BAD_COMMAND: + return "Inappropriate Command"; + case ERROR_PRINTER: + return "Printer Error"; + case ERROR_BUFFER_FULL: + return "Buffer Full"; + default: + return "Unknown"; + } +} + +#define STATUS_READY 0x00 +#define STATUS_INIT_CPU 0x31 +#define STATUS_INIT_RIBBON 0x32 +#define STATUS_INIT_PAPER 0x33 +#define STATUS_THERMAL_PROTECT 0x34 +#define STATUS_USING_PANEL 0x35 +#define STATUS_SELF_DIAG 0x36 +#define STATUS_DOWNLOADING 0x37 + +#define STATUS_FEEDING_PAPER 0x61 +#define STATUS_PRE_HEAT 0x62 +#define STATUS_PRINT_Y 0x63 +#define STATUS_BACK_FEED_Y 0x64 +#define STATUS_PRINT_M 0x65 +#define STATUS_BACK_FEED_M 0x66 +#define STATUS_PRINT_C 0x67 +#define STATUS_BACK_FEED_C 0x68 +#define STATUS_PRINT_OP 0x69 +#define STATUS_PAPER_CUT 0x6A +#define STATUS_PAPER_EJECT 0x6B +#define STATUS_BACK_FEED_E 0x6C + +static char *status_str(uint8_t v) { + switch (v) { + case STATUS_READY: + return "Ready"; + case STATUS_INIT_CPU: + return "Initializing CPU"; + case STATUS_INIT_RIBBON: + return "Initializing Ribbon"; + case STATUS_INIT_PAPER: + return "Loading Paper"; + case STATUS_THERMAL_PROTECT: + return "Thermal Protection"; + case STATUS_USING_PANEL: + return "Using Operation Panel"; + case STATUS_SELF_DIAG: + return "Processing Self Diagnosis"; + case STATUS_DOWNLOADING: + return "Processing Download"; + case STATUS_FEEDING_PAPER: + return "Feeding Paper"; + case STATUS_PRE_HEAT: + return "Pre-Heating"; + case STATUS_PRINT_Y: + return "Printing Yellow"; + case STATUS_BACK_FEED_Y: + return "Back-Feeding - Yellow Complete"; + case STATUS_PRINT_M: + return "Printing Magenta"; + case STATUS_BACK_FEED_M: + return "Back-Feeding - Magenta Complete"; + case STATUS_PRINT_C: + return "Printing Cyan"; + case STATUS_BACK_FEED_C: + return "Back-Feeding - Cyan Complete"; + case STATUS_PRINT_OP: + return "Laminating"; + case STATUS_PAPER_CUT: + return "Cutting Paper"; + case STATUS_PAPER_EJECT: + return "Ejecting Paper"; + case STATUS_BACK_FEED_E: + return "Back-Feeding - Ejected"; + case ERROR_PRINTER: + return "Printer Error"; + default: + return "Unknown"; + } +} + +struct s6245_status_resp { + struct s6245_status_hdr hdr; + uint32_t count_lifetime; + uint32_t count_maint; + uint32_t count_paper; + uint32_t count_cutter; + uint32_t count_head; + uint32_t count_ribbon_left; + uint32_t reserved; + + uint8_t bank1_printid; + uint16_t bank1_remaining; + uint16_t bank1_finished; + uint16_t bank1_specified; + uint8_t bank1_status; + + uint8_t bank2_printid; + uint16_t bank2_remaining; + uint16_t bank2_finished; + uint16_t bank2_specified; + uint8_t bank2_status; + + uint8_t reserved2[16]; + uint8_t tonecurve_status; + uint8_t reserved3[6]; +} __attribute__((packed)); + +#define BANK_STATUS_FREE 0x00 +#define BANK_STATUS_XFER 0x01 +#define BANK_STATUS_FULL 0x02 +#define BANK_STATUS_PRINTING 0x12 + +static char *bank_statuses(uint8_t v) +{ + switch (v) { + case BANK_STATUS_FREE: + return "Free"; + case BANK_STATUS_XFER: + return "Xfer"; + case BANK_STATUS_FULL: + return "Full"; + case BANK_STATUS_PRINTING: + return "Printing"; + default: + return "Unknown"; + } +} + +#define TONECURVE_INIT 0x00 +#define TONECURVE_USER 0x01 +#define TONECURVE_CURRENT 0x02 + +static char *tonecurve_statuses (uint8_t v) +{ + switch(v) { + case 0: + return "Initial"; + case 1: + return "UserSet"; + case 2: + return "Current"; + default: + return "Unknown"; + } +} + +struct s6245_geteeprom_resp { + struct s6245_status_hdr hdr; + uint8_t data[256]; +} __attribute__((packed)); + +struct s6245_readtone_resp { + struct s6245_status_hdr hdr; + uint16_t total_size; +} __attribute__((packed)); + +struct s6245_mediainfo_item { + uint8_t media_code; + uint16_t columns; + uint16_t rows; + uint8_t reserved; + uint8_t print_method; /* PRINT_METHOD_* */ + uint8_t reserved2[3]; +} __attribute__((packed)); + +#define MEDIA_8x10 0x10 +#define MEDIA_8x12 0x11 +#define MEDIA_8x4 0x20 +#define MEDIA_8x5 0x21 +#define MEDIA_8x6 0x22 +#define MEDIA_8x8 0x23 +#define MEDIA_8x4_2 0x30 +#define MEDIA_8x5_2 0x31 +#define MEDIA_8x6_2 0x32 +#define MEDIA_8x4_3 0x40 + +static char *print_medias (uint8_t v) { + switch (v) { + case MEDIA_8x10: + return "8x10"; + case MEDIA_8x12: + return "8x12"; + case MEDIA_8x4: + return "8x4"; + case MEDIA_8x5: + return "8x5"; + case MEDIA_8x6: + return "8x6"; + case MEDIA_8x8: + return "8x8"; + case MEDIA_8x4_2: + return "8x4*2"; + case MEDIA_8x5_2: + return "8x5*2"; + case MEDIA_8x6_2: + return "8x6*2"; + case MEDIA_8x4_3: + return "8x4*3"; + default: + return "Unknown"; + } +} + +struct s6245_mediainfo_resp { + struct s6245_status_hdr hdr; + uint8_t count; + struct s6245_mediainfo_item items[10]; /* Not all necessarily used */ +} __attribute__((packed)); + +struct s6245_errorlog_resp { + struct s6245_status_hdr hdr; + uint16_t error_count; + uint8_t error_major; + uint8_t error_minor; + uint16_t reserved; + uint32_t print_counter; + uint16_t ribbon_remain; + uint8_t ribbon_takeup_diameter; + uint8_t ribbon_supply_diameter; + uint16_t main_fw_ver; + uint16_t dsp_fw_ver; + uint16_t print_param_ver; + uint16_t boot_fw_ver; + uint8_t time_sec; + uint8_t time_min; + uint8_t time_hour; + uint8_t time_day; + uint8_t time_month; + uint8_t time_year; + uint16_t reserved2; + uint8_t printer_thermistor; + uint8_t head_thermistor; + uint8_t printer_humidity; + uint8_t reserved3[13]; + uint8_t status; + uint8_t reserved4[3]; + uint16_t image_cols; + uint16_t image_rows; + uint8_t reserved5[8]; +} __attribute__((packed)); + +struct s6245_getparam_resp { + struct s6245_status_hdr hdr; + uint32_t param; +} __attribute__((packed)); + +struct s6245_getserial_resp { + struct s6245_status_hdr hdr; + uint8_t data[8]; +} __attribute__((packed)); + +struct s6245_getprintidstatus_resp { + struct s6245_status_hdr hdr; + uint8_t id; + uint16_t remaining; + uint16_t finished; + uint16_t specified; + uint16_t status; +} __attribute__((packed)); + +#define STATUS_WAITING 0x0000 +#define STATUS_PRINTING 0x0100 +#define STATUS_COMPLETED 0x0200 +#define STATUS_ERROR 0xFFFF + +struct s6245_getextcounter_resp { + struct s6245_status_hdr hdr; + uint32_t lifetime_distance; /* Inches */ + uint32_t maint_distance; + uint32_t head_distance; + uint8_t reserved[32]; +} __attribute__((packed)); + +struct s6245_fwinfo_resp { + struct s6245_status_hdr hdr; + uint8_t name[8]; + uint8_t type[16]; + uint8_t date[10]; + uint8_t major; + uint8_t minor; + uint16_t checksum; +} __attribute__((packed)); + + + +#define READBACK_LEN 128 /* Needs to be larger than largest response hdr */ +#define CMDBUF_LEN sizeof(struct s6245_print_cmd) + +uint8_t rdbuf[READBACK_LEN]; + +static int s6245_do_cmd(struct shinkos6245_ctx *ctx, + uint8_t *cmd, int cmdlen, + int minlen, int *num) +{ + int ret; + struct s6245_status_hdr *resp = (struct s6245_status_hdr *) rdbuf; + + libusb_device_handle *dev = ctx->dev; + uint8_t endp_up = ctx->endp_up; + uint8_t endp_down = ctx->endp_down; + + if ((ret = send_data(dev, endp_down, + cmd, cmdlen))) + return (ret < 0) ? ret : -99; + + ret = read_data(dev, endp_up, + rdbuf, READBACK_LEN, num); + + if (ret < 0) + return ret; + if (*num < minlen) { + ERROR("Short read! (%d/%d))\n", *num, minlen); + return -99; + } + + if (resp->result != RESULT_SUCCESS) { + INFO("Printer Status: %02x (%s)\n", resp->status, + status_str(resp->status)); + INFO(" Result: 0x%02x Error: 0x%02x (0x%02x/0x%02x = %s)\n", + resp->result, resp->error, resp->printer_major, + resp->printer_minor, error_codes(resp->printer_major, resp->printer_minor)); + return -99; + } + + return ret; +} + +static int get_status(struct shinkos6245_ctx *ctx) +{ + struct s6245_cmd_hdr cmd; + struct s6245_status_resp *resp = (struct s6245_status_resp *) rdbuf; + struct s6245_getextcounter_resp *resp2 = (struct s6245_getextcounter_resp *) rdbuf; + int ret, num = 0; + + cmd.cmd = cpu_to_le16(S6245_CMD_GETSTATUS); + cmd.len = cpu_to_le16(0); + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.cmd)); + return ret; + } + + INFO("Printer Status: 0x%02x (%s)\n", resp->hdr.status, + status_str(resp->hdr.status)); + if (resp->hdr.status == ERROR_PRINTER) { + if(resp->hdr.error == ERROR_NONE) + resp->hdr.error = resp->hdr.status; + INFO(" Error 0x%02x (%s) 0x%02x/0x%02x (%s)\n", + resp->hdr.error, + error_str(resp->hdr.error), + resp->hdr.printer_major, + resp->hdr.printer_minor, error_codes(resp->hdr.printer_major, resp->hdr.printer_minor)); + } + if (le16_to_cpu(resp->hdr.payload_len) != (sizeof(struct s6245_status_resp) - sizeof(struct s6245_status_hdr))) + return 0; + + INFO(" Print Counts:\n"); + INFO("\tSince Paper Changed:\t%08u\n", le32_to_cpu(resp->count_paper)); + INFO("\tLifetime:\t\t%08u\n", le32_to_cpu(resp->count_lifetime)); + INFO("\tMaintainence:\t\t%08u\n", le32_to_cpu(resp->count_maint)); + INFO("\tPrint Head:\t\t%08u\n", le32_to_cpu(resp->count_head)); + INFO(" Cutter Actuations:\t%08u\n", le32_to_cpu(resp->count_cutter)); + INFO(" Ribbon Remaining:\t%08u\n", le32_to_cpu(resp->count_ribbon_left)); + INFO("Bank 1: 0x%02x (%s) Job %03u @ %03u/%03u (%03u remaining)\n", + resp->bank1_status, bank_statuses(resp->bank1_status), + resp->bank1_printid, + le16_to_cpu(resp->bank1_finished), + le16_to_cpu(resp->bank1_specified), + le16_to_cpu(resp->bank1_remaining)); + + INFO("Bank 2: 0x%02x (%s) Job %03d @ %03d/%03d (%03d remaining)\n", + resp->bank2_status, bank_statuses(resp->bank1_status), + resp->bank2_printid, + le16_to_cpu(resp->bank2_finished), + le16_to_cpu(resp->bank2_specified), + le16_to_cpu(resp->bank2_remaining)); + + INFO("Tonecurve Status: 0x%02x (%s)\n", resp->tonecurve_status, tonecurve_statuses(resp->tonecurve_status)); + + /* Query Extended counters */ + cmd.cmd = cpu_to_le16(S6245_CMD_EXTCOUNTER); + cmd.len = cpu_to_le16(0); + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp2), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.cmd)); + return ret; + } + if (le16_to_cpu(resp2->hdr.payload_len) != (sizeof(struct s6245_getextcounter_resp) - sizeof(struct s6245_status_hdr))) + return 0; + + INFO("Lifetime Distance: %08d inches\n", le32_to_cpu(resp2->lifetime_distance)); + INFO("Maintainence Distance: %08d inches\n", le32_to_cpu(resp2->maint_distance)); + INFO("Head Distance: %08d inches\n", le32_to_cpu(resp2->head_distance)); + + return 0; +} + +static int get_fwinfo(struct shinkos6245_ctx *ctx) +{ + struct s6245_fwinfo_cmd cmd; + struct s6245_fwinfo_resp *resp = (struct s6245_fwinfo_resp *)rdbuf; + int num = 0; + int i; + + cmd.hdr.cmd = cpu_to_le16(S6245_CMD_FWINFO); + cmd.hdr.len = cpu_to_le16(1); + + INFO("FW Information:\n"); + + for (i = FWINFO_TARGET_MAIN_BOOT ; i <= FWINFO_TARGET_PRINT_TABLES ; i++) { + int ret; + cmd.target = i; + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.hdr.cmd)); + continue; + } + + if (le16_to_cpu(resp->hdr.payload_len) != (sizeof(struct s6245_fwinfo_resp) - sizeof(struct s6245_status_hdr))) + continue; + + INFO(" %s\t ver %02x.%02x\n", fwinfo_targets(i), + resp->major, resp->minor); +#if 0 + INFO(" name: '%s'\n", resp->name); + INFO(" type: '%s'\n", resp->type); + INFO(" date: '%s'\n", resp->date); + INFO(" version: %02x.%02x (CRC %04x)\n", resp->major, resp->minor, + le16_to_cpu(resp->checksum)); +#endif + } + return 0; +} + +static int get_errorlog(struct shinkos6245_ctx *ctx) +{ + struct s6245_errorlog_cmd cmd; + struct s6245_errorlog_resp *resp = (struct s6245_errorlog_resp *) rdbuf; + int ret, num = 0; + int i = 0; + + cmd.hdr.cmd = cpu_to_le16(S6245_CMD_ERRORLOG); + cmd.hdr.len = cpu_to_le16(2); + + do { + cmd.index = i; + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.hdr.cmd)); + return ret; + } + + if (le16_to_cpu(resp->hdr.payload_len) != (sizeof(struct s6245_errorlog_resp) - sizeof(struct s6245_status_hdr))) + return -2; + + INFO("Stored Error ID %d:\n", i); + INFO(" %04d-%02d-%02d %02d:%02d:%02d @ %08u prints : 0x%02x/0x%02x (%s)\n", + resp->time_year + 2000, resp->time_month, resp->time_day, + resp->time_hour, resp->time_min, resp->time_sec, + le32_to_cpu(resp->print_counter), + resp->error_major, resp->error_minor, + error_codes(resp->error_major, resp->error_minor)); + INFO(" Temp: %02d/%02d Hum: %02d\n", + resp->printer_thermistor, resp->head_thermistor, resp->printer_humidity); + } while (++i < le16_to_cpu(resp->error_count)); + + return 0; +} + +static int get_mediainfo(struct shinkos6245_ctx *ctx) +{ + struct s6245_cmd_hdr cmd; + struct s6245_mediainfo_resp *resp = (struct s6245_mediainfo_resp *) rdbuf; + int ret, num = 0; + int i; + + cmd.cmd = cpu_to_le16(S6245_CMD_MEDIAINFO); + cmd.len = cpu_to_le16(0); + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.cmd)); + return ret; + } + + if (le16_to_cpu(resp->hdr.payload_len) != (sizeof(struct s6245_mediainfo_resp) - sizeof(struct s6245_status_hdr))) + return -2; + + INFO("Supported Media Information: %d entries:\n", resp->count); + for (i = 0 ; i < resp->count ; i++) { + INFO(" %02d: C 0x%02x (%s), %04dx%04d, P 0x%02x (%s)\n", i, + resp->items[i].media_code, print_medias(resp->items[i].media_code), + le16_to_cpu(resp->items[i].columns), + le16_to_cpu(resp->items[i].rows), + resp->items[i].print_method, print_methods(resp->items[i].print_method)); + } + return 0; +} + +static int cancel_job(struct shinkos6245_ctx *ctx, char *str) +{ + struct s6245_cancel_cmd cmd; + struct s6245_status_hdr *resp = (struct s6245_status_hdr *) rdbuf; + int ret, num = 0; + + if (!str) + return -1; + + cmd.id = atoi(str); + + cmd.hdr.cmd = cpu_to_le16(S6245_CMD_CANCELJOB); + cmd.hdr.len = cpu_to_le16(1); + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.hdr.cmd)); + return ret; + } + + return 0; +} + +static int flash_led(struct shinkos6245_ctx *ctx) +{ + struct s6245_cmd_hdr cmd; + struct s6245_status_hdr *resp = (struct s6245_status_hdr *) rdbuf; + int ret, num = 0; + + cmd.cmd = cpu_to_le16(S6245_CMD_FLASHLED); + cmd.len = cpu_to_le16(0); + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.cmd)); + return ret; + } + + return 0; +} + +static int reset_curve(struct shinkos6245_ctx *ctx, int target) +{ + struct s6245_reset_cmd cmd; + struct s6245_status_hdr *resp = (struct s6245_status_hdr *) rdbuf; + int ret, num = 0; + + cmd.target = target; + + cmd.hdr.cmd = cpu_to_le16(S6245_CMD_RESET); + cmd.hdr.len = cpu_to_le16(1); + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.hdr.cmd)); + return ret; + } + + return 0; +} + +static int get_tonecurve(struct shinkos6245_ctx *ctx, int type, char *fname) +{ + struct s6245_readtone_cmd cmd; + struct s6245_readtone_resp *resp = (struct s6245_readtone_resp *) rdbuf; + int ret, num = 0; + + uint8_t *data; + uint16_t curves[768]; + + int i,j; + + cmd.target = type; + cmd.curveid = TONE_CURVE_ID; + + cmd.hdr.cmd = cpu_to_le16(S6245_CMD_READTONE); + cmd.hdr.len = cpu_to_le16(1); + + INFO("Dump %s Tone Curve to '%s'\n", tonecurve_statuses(type), fname); + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.hdr.cmd)); + return ret; + } + + resp->total_size = le16_to_cpu(resp->total_size); + + data = malloc(resp->total_size * 2); + if (!data) { + ERROR("Memory Allocation Failure!\n"); + return -1; + } + + i = 0; + while (i < resp->total_size) { + ret = read_data(ctx->dev, ctx->endp_up, + data + i, + resp->total_size * 2 - i, + &num); + if (ret < 0) + goto done; + i += num; + } + + i = j = 0; + while (i < resp->total_size) { + memcpy(curves + j, data + i+2, data[i+1]); + j += data[i+1] / 2; + i += data[i+1] + 2; + } + + /* Open file and write it out */ + { + int tc_fd = open(fname, O_WRONLY|O_CREAT, S_IRUSR|S_IWUSR); + if (tc_fd < 0) { + ret = -1; + goto done; + } + + for (i = 0 ; i < 768; i++) { + /* Byteswap appropriately */ + curves[i] = cpu_to_be16(le16_to_cpu(curves[i])); + write(tc_fd, &curves[i], sizeof(uint16_t)); + } + close(tc_fd); + } + +done: + free(data); + return ret; +} + +static int set_tonecurve(struct shinkos6245_ctx *ctx, int target, char *fname) +{ + struct s6245_update_cmd cmd; + struct s6245_status_hdr *resp = (struct s6245_status_hdr *) rdbuf; + int ret, num = 0; + + INFO("Set %s Tone Curve from '%s'\n", update_targets(target), fname); + + uint16_t *data = malloc(UPDATE_SIZE); + if (!data) { + ERROR("Memory Allocation Failure!\n"); + return -1; + } + + /* Read in file */ + int tc_fd = open(fname, O_RDONLY); + if (tc_fd < 0) { + ret = -1; + goto done; + } + if (read(tc_fd, data, UPDATE_SIZE) != UPDATE_SIZE) { + ret = -2; + goto done; + } + close(tc_fd); + /* Byteswap data to local CPU.. */ + for (ret = 0; ret < UPDATE_SIZE ; ret+=2) { + data[ret] = be16_to_cpu(data[ret]); + } + + /* Set up command */ + cmd.target = target; + cmd.reserved[0] = cmd.reserved[1] = cmd.reserved[2] = 0; + cmd.reset = 0; + cmd.size = cpu_to_le32(UPDATE_SIZE); + + cmd.hdr.cmd = cpu_to_le16(S6245_CMD_UPDATE); + cmd.hdr.len = cpu_to_le16(sizeof(struct s6245_update_cmd)-sizeof(cmd.hdr)); + + /* Byteswap data to format printer is expecting.. */ + for (ret = 0; ret < UPDATE_SIZE ; ret+=2) { + data[ret] = cpu_to_le16(data[ret]); + } + + if ((ret = s6245_do_cmd(ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.hdr.cmd)); + goto done; + } + + /* Sent transfer */ + if ((ret = send_data(ctx->dev, ctx->endp_down, + (uint8_t *) data, UPDATE_SIZE))) { + goto done; + } + +done: + free(data); + + return ret; +} + +static void shinkos6245_cmdline(void) +{ + DEBUG("\t\t[ -c filename ] # Get user/NV tone curve\n"); + DEBUG("\t\t[ -C filename ] # Set user/NV tone curve\n"); + DEBUG("\t\t[ -e ] # Query error log\n"); + DEBUG("\t\t[ -f ] # Use fast return mode\n"); + DEBUG("\t\t[ -F ] # Flash Printer LED\n"); + DEBUG("\t\t[ -l filename ] # Get current tone curve\n"); + DEBUG("\t\t[ -L filename ] # Set current tone curve\n"); + DEBUG("\t\t[ -m ] # Query media\n"); + DEBUG("\t\t[ -i ] # Query printer info\n"); + DEBUG("\t\t[ -r ] # Reset user/NV tone curve\n"); + DEBUG("\t\t[ -R ] # Reset printer to factory defaults\n"); + DEBUG("\t\t[ -s ] # Query status\n"); + DEBUG("\t\t[ -X jobid ] # Abort a printjob\n"); +} + +int shinkos6245_cmdline_arg(void *vctx, int argc, char **argv) +{ + struct shinkos6245_ctx *ctx = vctx; + int i, j = 0; + + /* Reset arg parsing */ + optind = 1; + opterr = 0; + while ((i = getopt(argc, argv, "c:C:efFil:L:mr:R:sX:")) >= 0) { + switch(i) { + case 'c': + if (ctx) { + j = get_tonecurve(ctx, TONECURVE_USER, optarg); + break; + } + return 1; + case 'C': + if (ctx) { + j = set_tonecurve(ctx, TONECURVE_USER, optarg); + break; + } + return 1; + case 'e': + if (ctx) { + j = get_errorlog(ctx); + break; + } + return 1; + case 'f': + if (ctx) { + ctx->fast_return = 1; + break; + } + return 1; + case 'F': + if (ctx) { + j = flash_led(ctx); + break; + } + return 1; + case 'i': + if (ctx) { + j = get_fwinfo(ctx); + break; + } + return 1; + case 'l': + if (ctx) { + j = get_tonecurve(ctx, TONECURVE_CURRENT, optarg); + break; + } + return 1; + case 'L': + if (ctx) { + j = set_tonecurve(ctx, TONECURVE_CURRENT, optarg); + break; + } + return 1; + case 'm': + if (ctx) { + j = get_mediainfo(ctx); + break; + } + return 1; + case 'r': + if (ctx) { + j = reset_curve(ctx, RESET_TONE_CURVE); + break; + } + return 1; + case 'R': + if (ctx) { + j = reset_curve(ctx, RESET_PRINTER); + break; + } + return 1; + case 's': + if (ctx) { + j = get_status(ctx); + break; + } + return 1; + case 'X': + if (ctx) { + j = cancel_job(ctx, optarg); + break; + } + return 1; + default: + break; /* Ignore completely */ + } + + if (j) return j; + } + + return 0; +} + +static void *shinkos6245_init(void) +{ + struct shinkos6245_ctx *ctx = malloc(sizeof(struct shinkos6245_ctx)); + if (!ctx) { + ERROR("Memory Allocation Failure!\n"); + return NULL; + } + memset(ctx, 0, sizeof(struct shinkos6245_ctx)); + + /* Use Fast return by default in CUPS mode */ + if (getenv("DEVICE_URI") || getenv("FAST_RETURN")) + ctx->fast_return = 1; + + return ctx; +} + +static void shinkos6245_attach(void *vctx, struct libusb_device_handle *dev, + uint8_t endp_up, uint8_t endp_down, uint8_t jobid) +{ + struct shinkos6245_ctx *ctx = vctx; + + ctx->dev = dev; + ctx->endp_up = endp_up; + ctx->endp_down = endp_down; + + /* Ensure jobid is sane */ + ctx->jobid = (jobid & 0x7f) + 1; +} + +static void shinkos6245_teardown(void *vctx) { + struct shinkos6245_ctx *ctx = vctx; + + if (!ctx) + return; + + if (ctx->databuf) + free(ctx->databuf); + + free(ctx); +} + +static int shinkos6245_read_parse(void *vctx, int data_fd) { + struct shinkos6245_ctx *ctx = vctx; + int ret; + uint8_t tmpbuf[4]; + + if (!ctx) + return CUPS_BACKEND_FAILED; + + /* Read in then validate header */ + ret = read(data_fd, &ctx->hdr, sizeof(ctx->hdr)); + if (ret < 0 || ret != sizeof(ctx->hdr)) { + if (ret == 0) + return CUPS_BACKEND_CANCEL; + ERROR("Read failed (%d/%d/%d)\n", + ret, 0, (int)sizeof(ctx->hdr)); + perror("ERROR: Read failed"); + return ret; + } + + if (le32_to_cpu(ctx->hdr.len1) != 0x10 || + le32_to_cpu(ctx->hdr.len2) != 0x64 || + le32_to_cpu(ctx->hdr.dpi) != 300) { + ERROR("Unrecognized header data format!\n"); + return CUPS_BACKEND_CANCEL; + } + + if (le32_to_cpu(ctx->hdr.model) != 6245) { + ERROR("Unrecognized printer (%d)!\n", le32_to_cpu(ctx->hdr.model)); + + return CUPS_BACKEND_CANCEL; + } + + if (ctx->databuf) { + free(ctx->databuf); + ctx->databuf = NULL; + } + + ctx->datalen = le32_to_cpu(ctx->hdr.rows) * le32_to_cpu(ctx->hdr.columns) * 3; + ctx->databuf = malloc(ctx->datalen); + if (!ctx->databuf) { + ERROR("Memory allocation failure!\n"); + return CUPS_BACKEND_FAILED; + } + + { + int remain = ctx->datalen; + uint8_t *ptr = ctx->databuf; + do { + ret = read(data_fd, ptr, remain); + if (ret < 0) { + ERROR("Read failed (%d/%d/%d)\n", + ret, remain, ctx->datalen); + perror("ERROR: Read failed"); + return ret; + } + ptr += ret; + remain -= ret; + } while (remain); + } + + /* Make sure footer is sane too */ + ret = read(data_fd, tmpbuf, 4); + if (ret != 4) { + ERROR("Read failed (%d/%d/%d)\n", + ret, 4, 4); + perror("ERROR: Read failed"); + return ret; + } + if (tmpbuf[0] != 0x04 || + tmpbuf[1] != 0x03 || + tmpbuf[2] != 0x02 || + tmpbuf[3] != 0x01) { + ERROR("Unrecognized footer data format!\n"); + return CUPS_BACKEND_FAILED; + } + + return CUPS_BACKEND_OK; +} + +static int shinkos6245_main_loop(void *vctx, int copies) { + struct shinkos6245_ctx *ctx = vctx; + + int ret, num; + uint8_t cmdbuf[CMDBUF_LEN]; + uint8_t rdbuf2[READBACK_LEN]; + + int i, last_state = -1, state = S_IDLE; + + struct s6245_cmd_hdr *cmd = (struct s6245_cmd_hdr *) cmdbuf;; + struct s6245_print_cmd *print = (struct s6245_print_cmd *) cmdbuf; + struct s6245_status_resp *sts = (struct s6245_status_resp *) rdbuf; + struct s6245_mediainfo_resp *media = (struct s6245_mediainfo_resp *) rdbuf; + + /* Send Media Query */ + memset(cmdbuf, 0, CMDBUF_LEN); + cmd->cmd = cpu_to_le16(S6245_CMD_MEDIAINFO); + cmd->len = cpu_to_le16(0); + + if ((ret = s6245_do_cmd(ctx, + cmdbuf, sizeof(*cmd), + sizeof(*media), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd->cmd)); + return CUPS_BACKEND_FAILED; + } + + if (le16_to_cpu(media->hdr.payload_len) != (sizeof(struct s6245_mediainfo_resp) - sizeof(struct s6245_status_hdr))) + return CUPS_BACKEND_FAILED; + + /* Validate print sizes */ + for (i = 0; i < media->count ; i++) { + /* Look for matching media */ + if (le16_to_cpu(media->items[i].columns) == cpu_to_le16(le32_to_cpu(ctx->hdr.columns)) && + le16_to_cpu(media->items[i].rows) == cpu_to_le16(le32_to_cpu(ctx->hdr.rows))) + break; + } + if (i == media->count) { + ERROR("Incorrect media loaded for print!\n"); + return CUPS_BACKEND_HOLD; + } + + top: + if (state != last_state) { + if (dyesub_debug) + DEBUG("last_state %d new %d\n", last_state, state); + } + + /* Send Status Query */ + memset(cmdbuf, 0, CMDBUF_LEN); + cmd->cmd = cpu_to_le16(S6245_CMD_GETSTATUS); + cmd->len = cpu_to_le16(0); + + if ((ret = s6245_do_cmd(ctx, + cmdbuf, sizeof(*cmd), + sizeof(struct s6245_status_hdr), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd->cmd)); + return CUPS_BACKEND_FAILED; + } + + if (memcmp(rdbuf, rdbuf2, READBACK_LEN)) { + memcpy(rdbuf2, rdbuf, READBACK_LEN); + + INFO("Printer Status: 0x%02x (%s)\n", + sts->hdr.status, status_str(sts->hdr.status)); + if (sts->hdr.result != RESULT_SUCCESS) + goto printer_error; + if (sts->hdr.error == ERROR_PRINTER) + goto printer_error; + } else if (state == last_state) { + sleep(1); + goto top; + } + last_state = state; + + fflush(stderr); + + switch (state) { + case S_IDLE: + INFO("Waiting for printer idle\n"); + /* If either bank is free, continue */ + if (sts->bank1_status == BANK_STATUS_FREE || + sts->bank2_status == BANK_STATUS_FREE) + state = S_PRINTER_READY_CMD; + + break; + case S_PRINTER_READY_CMD: + INFO("Initiating print job (internal id %d)\n", ctx->jobid); + + memset(cmdbuf, 0, CMDBUF_LEN); + print->hdr.cmd = cpu_to_le16(S6245_CMD_PRINTJOB); + print->hdr.len = cpu_to_le16(sizeof (*print) - sizeof(*cmd)); + + print->id = ctx->jobid; + print->count = cpu_to_le16(copies); + print->columns = cpu_to_le16(le32_to_cpu(ctx->hdr.columns)); + print->rows = cpu_to_le16(le32_to_cpu(ctx->hdr.rows)); + print->mode = le32_to_cpu(ctx->hdr.oc_mode); +// print->method = le32_to_cpu(ctx->hdr.method); + // XXX multicut -- 8x4*2, 8x4*3, 8x6*2, 8x5*2 + + if ((ret = s6245_do_cmd(ctx, + cmdbuf, sizeof(*print), + sizeof(struct s6245_status_hdr), + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(print->hdr.cmd)); + return ret; + } + + if (sts->hdr.result != RESULT_SUCCESS) { + if (sts->hdr.error == ERROR_BUFFER_FULL) { + INFO("Printer Buffers full, retrying\n"); + break; + } else if (sts->hdr.status != ERROR_NONE) + goto printer_error; + } + + INFO("Sending image data to printer\n"); + if ((ret = send_data(ctx->dev, ctx->endp_down, + ctx->databuf, ctx->datalen))) + return CUPS_BACKEND_FAILED; + + INFO("Waiting for printer to acknowledge completion\n"); + sleep(1); + state = S_PRINTER_SENT_DATA; + break; + case S_PRINTER_SENT_DATA: + if (ctx->fast_return) { + INFO("Fast return mode enabled.\n"); + state = S_FINISHED; + } else if (sts->hdr.status == STATUS_READY) { + state = S_FINISHED; + } + break; + default: + break; + }; + + if (state != S_FINISHED) + goto top; + + /* This printer handles copies internally */ + copies = 1; + + /* Clean up */ + if (terminate) + copies = 1; + + INFO("Print complete (%d copies remaining)\n", copies - 1); + + if (copies && --copies) { + state = S_IDLE; + goto top; + } + + return CUPS_BACKEND_OK; + +printer_error: + ERROR("Printer reported error: %#x (%s) status: %#x (%s) -> %#x.%#x (%s)\n", + sts->hdr.error, + error_str(sts->hdr.error), + sts->hdr.status, + status_str(sts->hdr.status), + sts->hdr.printer_major, sts->hdr.printer_minor, + error_codes(sts->hdr.printer_major, sts->hdr.printer_minor)); + return CUPS_BACKEND_FAILED; +} + +static int shinkos6245_query_serno(struct libusb_device_handle *dev, uint8_t endp_up, uint8_t endp_down, char *buf, int buf_len) +{ + struct s6245_cmd_hdr cmd; + struct s6245_getserial_resp *resp = (struct s6245_getserial_resp*) rdbuf; + int ret, num = 0; + + struct shinkos6245_ctx ctx = { + .dev = dev, + .endp_up = endp_up, + .endp_down = endp_down, + }; + + cmd.cmd = cpu_to_le16(S6245_CMD_GETSERIAL); + cmd.len = cpu_to_le16(0); + + if ((ret = s6245_do_cmd(&ctx, + (uint8_t*)&cmd, sizeof(cmd), + sizeof(*resp) - 1, + &num)) < 0) { + ERROR("Failed to execute %s command\n", cmd_names(cmd.cmd)); + return ret; + } + + /* Null-terminate */ + resp->hdr.payload_len = le16_to_cpu(resp->hdr.payload_len); + if (resp->hdr.payload_len > 23) + resp->hdr.payload_len = 23; + resp->data[resp->hdr.payload_len] = 0; + strncpy(buf, (char*)resp->data, buf_len); + buf[buf_len-1] = 0; /* ensure it's null terminated */ + + return CUPS_BACKEND_OK; +} + +/* Exported */ +#define USB_VID_SHINKO 0x10CE +#define USB_PID_SHINKO_S6245 0x001D + +struct dyesub_backend shinkos6245_backend = { + .name = "Shinko/Sinfonia CHC-S6245", + .version = "0.01WIP", + .uri_prefix = "shinkos6245", + .cmdline_usage = shinkos6245_cmdline, + .cmdline_arg = shinkos6245_cmdline_arg, + .init = shinkos6245_init, + .attach = shinkos6245_attach, + .teardown = shinkos6245_teardown, + .read_parse = shinkos6245_read_parse, + .main_loop = shinkos6245_main_loop, + .query_serno = shinkos6245_query_serno, + .devices = { + { USB_VID_SHINKO, USB_PID_SHINKO_S6245, P_SHINKO_S6245, ""}, + { 0, 0, 0, ""} + } +}; + +/* CHC-S6245 data format + + Spool file consists of an 116-byte header, followed by RGB-packed data, + followed by a 4-byte footer. Header appears to consist of a series of + 4-byte Little Endian words. + + 10 00 00 00 MM MM 00 00 01 00 00 00 01 00 00 00 MM == Model (ie 6245d) + 64 00 00 00 00 00 00 00 TT 00 00 00 00 00 00 00 TT == 0x20 8x4, 0x21 8x5, 0x22 8x6, 0x23 8x8, 0x10 8x10, 0x11 8x12 + 00 00 00 00 00 00 00 00 XX 00 00 00 00 00 00 00 XX == 0x03 matte, 0x02 glossy, 0x01 no coat + 00 00 00 00 WW WW 00 00 HH HH 00 00 NN 00 00 00 WW/HH Width, Height (LE), NN == Copies + 00 00 00 00 00 00 00 00 00 00 00 00 ce ff ff ff + 00 00 00 00 ce ff ff ff QQ QQ 00 00 ce ff ff ff QQ == DPI (300) + 00 00 00 00 ce ff ff ff 00 00 00 00 00 00 00 00 + 00 00 00 00 + + [[Packed RGB payload of WW*HH*3 bytes]] + + 04 03 02 01 [[ footer ]] + +*/