/* * Sony UP-DR150 Photo Printer CUPS backend -- libusb-1.0 version * * (c) 2013-2014 Solomon Peachy * * The latest version of this program can be found at: * * http://git.shaftnet.org/cgit/selphy_print.git * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 3 of the License, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * [http://www.gnu.org/licenses/gpl-3.0.html] * */ #include #include #include #include #include #include #include #include #include "backend_common.h" /* Exported */ #define USB_VID_SONY 0x054C #define USB_PID_SONY_UPDR150 0x01E8 #define USB_PID_SONY_UPDR200 0x035F #define USB_PID_SONY_UPCR10 1234 /* Private data stucture */ struct updr150_ctx { struct libusb_device_handle *dev; uint8_t endp_up; uint8_t endp_down; uint8_t *databuf; int datalen; uint32_t copies_offset; uint8_t type; }; static void* updr150_init(void) { struct updr150_ctx *ctx = malloc(sizeof(struct updr150_ctx)); if (!ctx) return NULL; memset(ctx, 0, sizeof(struct updr150_ctx)); return ctx; } static void updr150_attach(void *vctx, struct libusb_device_handle *dev, uint8_t endp_up, uint8_t endp_down, uint8_t jobid) { struct updr150_ctx *ctx = vctx; struct libusb_device *device; struct libusb_device_descriptor desc; UNUSED(jobid); ctx->dev = dev; ctx->endp_up = endp_up; ctx->endp_down = endp_down; device = libusb_get_device(dev); libusb_get_device_descriptor(device, &desc); if (desc.idProduct == USB_PID_SONY_UPDR150 || desc.idProduct == USB_PID_SONY_UPDR200) ctx->type = P_SONY_UPDR150; else ctx->type = P_SONY_UPCR10; // XXX ctx->copies_offset = 0; } static void updr150_teardown(void *vctx) { struct updr150_ctx *ctx = vctx; if (!ctx) return; if (ctx->databuf) free(ctx->databuf); free(ctx); } #define MAX_PRINTJOB_LEN 16736455 static int updr150_read_parse(void *vctx, int data_fd) { struct updr150_ctx *ctx = vctx; int len, run = 1; if (!ctx) return CUPS_BACKEND_FAILED; if (ctx->databuf) { free(ctx->databuf); ctx->databuf = NULL; } ctx->datalen = 0; ctx->databuf = malloc(MAX_PRINTJOB_LEN); if (!ctx->databuf) { ERROR("Memory allocation failure!\n"); return CUPS_BACKEND_FAILED; } while(run) { int i; int keep = 0; i = read(data_fd, ctx->databuf + ctx->datalen, 4); if (i < 0) return CUPS_BACKEND_CANCEL; if (i == 0) break; memcpy(&len, ctx->databuf + ctx->datalen, sizeof(len)); len = le32_to_cpu(len); /* Filter out chunks we don't send to the printer */ switch (len) { case 0xffffff60: case 0xffffff6a: case 0xffffffeb: case 0xffffffec: case 0xffffffed: case 0xfffffff4: case 0xfffffff8: case 0xfffffff9: case 0xfffffffa: case 0xfffffffb: case 0xfffffffc: case 0xffffffff: if(dyesub_debug) DEBUG("Block ID '%08x' (len %d)\n", len, 0); len = 0; break; case 0xfffffff3: if(dyesub_debug) DEBUG("Block ID '%08x' (len %d)\n", len, 0); len = 0; if (ctx->type == P_SONY_UPDR150) run = 0; break; case 0xfffffff7: if(dyesub_debug) DEBUG("Block ID '%08x' (len %d)\n", len, 0); len = 0; if (ctx->type == P_SONY_UPCR10) run = 0; break; case 0xffffffef: case 0xfffffff5: if(dyesub_debug) DEBUG("Block ID '%08x' (len %d)\n", len, 4); len = 4; break; default: if (len & 0xff000000) { ERROR("Unknown block ID '%08x', aborting!\n", len); return CUPS_BACKEND_CANCEL; } else { /* Only keep these chunks */ if(dyesub_debug) DEBUG("Data block (len %d)\n", len); keep = 1; } break; } if (keep) ctx->datalen += sizeof(uint32_t); /* Read in the data chunk */ while(len > 0) { i = read(data_fd, ctx->databuf + ctx->datalen, len); if (i < 0) return CUPS_BACKEND_CANCEL; if (i == 0) break; if (ctx->type == P_SONY_UPCR10 && ctx->databuf[ctx->datalen + 1] == 0xee) { ctx->copies_offset = ctx->datalen + 8; } if (keep) ctx->datalen += i; len -= i; } } if (!ctx->datalen) return CUPS_BACKEND_CANCEL; return CUPS_BACKEND_OK; } static int updr150_main_loop(void *vctx, int copies) { struct updr150_ctx *ctx = vctx; int i = 0, ret; if (!ctx) return CUPS_BACKEND_FAILED; /* Some models specify copies in the print job */ if (ctx->copies_offset) { ctx->databuf[ctx->copies_offset] = copies; copies = 1; } top: while (i < ctx->datalen) { uint32_t len; memcpy(&len, ctx->databuf + i, sizeof(len)); len = le32_to_cpu(len); i += sizeof(uint32_t); if (dyesub_debug) DEBUG("Sending %u bytes to printer @ %i\n", len, i); if ((ret = send_data(ctx->dev, ctx->endp_down, ctx->databuf + i, len))) return CUPS_BACKEND_FAILED; i += len; } /* Clean up */ if (terminate) copies = 1; INFO("Print complete (%d copies remaining)\n", copies - 1); if (copies && --copies) { goto top; } return CUPS_BACKEND_OK; } struct dyesub_backend updr150_backend = { .name = "Sony UP-DR150/UP-DR200/UP-CR10", .version = "0.16", .uri_prefix = "sonyupdr150", .init = updr150_init, .attach = updr150_attach, .teardown = updr150_teardown, .read_parse = updr150_read_parse, .main_loop = updr150_main_loop, .devices = { { USB_VID_SONY, USB_PID_SONY_UPDR150, P_SONY_UPDR150, ""}, { USB_VID_SONY, USB_PID_SONY_UPDR200, P_SONY_UPDR150, ""}, { USB_VID_SONY, USB_PID_SONY_UPCR10, P_SONY_UPCR10, ""}, { 0, 0, 0, ""} } }; /* Sony UP-DR150/UP-DR200 Spool file format The spool file is a series of 4-byte commands, followed by optional arguments. The purpose of the commands is unknown, but they presumably instruct the driver to perform certain things. If you treat these 4 bytes as a 32-bit little-endian number, if the most significant four bits are bits are non-zero, the value is is to be interpreted as a driver command. If the most significant bits are zero, the value signifies that the following N bytes of data should be sent to the printer as-is. Known driver "commands": 6a ff ff ff fc ff ff ff fb ff ff ff f4 ff ff ff ed ff ff ff f9 ff ff ff f8 ff ff ff ec ff ff ff eb ff ff ff fa ff ff ff f3 ff ff ff ef ff ff ff XX 00 00 00 # XX == print size (0x01/0x02/0x03/0x04) f5 ff ff ff YY 00 00 00 # YY == ??? (seen 0x01) All printer commands start with 0x1b, and are at least 7 bytes long. ************************************************************************ The data stream sent to the printer consists of all the commands in the spool file, plus a couple other ones that generate responses. It is unknown if those additional commands are necessary. This is a typical sequence: [[ Sniff start of a UP-DR150 ]] <- 1b e0 00 00 00 0f 00 -> 0e 00 00 00 00 00 00 00 00 04 a8 08 0a a4 00 <- 1b 16 00 00 00 00 00 -> "reset" ?? [[ begin job ]] <- 1b ef 00 00 00 06 00 -> 05 00 00 00 00 22 <- 1b e5 00 00 00 08 00 ** In spool file <- 00 00 00 00 00 00 01 00 <- 1b c1 00 02 06 00 00 -> 02 02 00 03 00 00 <- 1b ee 00 00 00 02 00 ** In spool file <- 00 01 <- 1b 15 00 00 00 0d 00 ** In spool file <- 00 00 00 00 07 00 00 00 00 08 00 0a a4 <- 1b 03 00 00 00 13 00 -> 70 00 00 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00 <- 1b e1 00 00 00 0b 00 ** In spool file <- 00 80 00 00 00 00 00 08 00 0a a4 <- 1b 03 00 00 00 13 00 -> 70 00 00 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00 <- 1b ea 00 00 00 00 00 ff 60 00 00 ** In spool file <- [[ 0x0060ff00 bytes of data ]] <- 1b e0 00 00 00 0f 00 -> 0e 00 00 00 00 00 00 00 04 a8 08 00 0a a4 00 <- 1b 0a 00 00 00 00 00 ** In spool file <- 1b 17 00 00 00 00 00 ** In spool file [[fin]] ************** Sony UP-CL10 / DNP SL-10 spool format: 60 ff ff ff f8 ff ff ff fd ff ff ff 14 00 00 00 1b 15 00 00 00 0d 00 00 00 00 00 07 00 00 00 00 WW WW HH HH fb ff ff ff f4 ff ff ff 0b 00 00 00 1b ea 00 00 00 00 SH SH SH SH 00 SL SL SL SL [[ Data, rows * cols * 3 bytes ]] f3 ff ff ff 0f 00 00 00 1b e5 00 00 00 08 00 00 00 00 00 00 00 00 00 12 00 00 00 1b e1 00 00 00 0b 00 00 80 00 00 00 00 00 WW WW HH HH fa ff ff ff 09 00 00 00 1b ee 00 00 00 02 00 00 NN 07 00 00 00 1b 0a 00 00 00 00 00 f9 ff ff ff fc ff ff ff 07 00 00 00 1b 17 00 00 00 00 00 f7 ff ff ff WW WW == Columns, Big Endian HH HH == Rows, Big Endian SL SL SL SL == Plane size, Little Endian (Rows * Cols * 3) SH SH SH SH == Plane size, Big Endian (Rows * Cols * 3) NN == Copies */