You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
LibMitsuD70ImageReProcess -- Re-implemented image processing library for
the Mitsubishi CP-D70 family of printers
Copyright (c) 2016-2021 Solomon Peachy <email@example.com>
** ** ** ** Do NOT contact Mitsubishi about this library! ** ** ** **
This library is a platform-independent reimplementation of the image
processing algorithms that are necessary to utilize the Mitsubishi
CP-D70, CP-M1, CP9800, and CP30 families of printers.
Mitsubishi was *NOT* involved in the creation of this library, and is
not responsible in any way for the library or any deficiencies in its
output. They will provide no support if it is used.
However, without this library, it is nearly impossible to utilize the
the above families of printers under Linux and similar operating
The following printers are known to utilize this library:
* Mitsubishi CP-D70DW
* Mitsubishi CP-D707DW
* Mitsubishi CP-D70DW-S
* Mitsubishi CP-D707DW-S
* Mitsubishi CP-K60DW-S
* Mitsubishi CP-D80DW
* Mitsubishi CP-M1
* Mitsubishi CP-M15
* Mitsubishi CP30DW
* Mitsubishi CP9800DW [*1]
* Mitsubishi CP9810DW [*1]
* Mitsubishi CP9820DW-S [*1]
* Kodak 305
* Fujifilm ASK-300
* Fujifilm ASK-500 [*2]
[*1] The CP98xx family is expected to function, but likely has
bugs affecting the output quality.
[*2] The ASK500 is expected to function but has not been tested.
** ** ** **
This library is released under the GNU GPL version 3. Unfortunately
this means that it cannot be bundled with Gutenprint.
In order to utilize this library with Gutenprint, you will need:
* Gutenprint 5.2.12-pre4 or newer
* Current selphy_print backend
* This library
To build this library:
You may also need to add the library to the search path:
echo "/usr/local/lib" >> /etc/ld.so.conf