Solomon Peachy
03ca5ce596
This required substantial rework of the "common" rgb8 pano split code to add blending support (modeled after the DNP stuff) along with MANY bugfixes. The Sinfonia pano code (used by the EK8810 and EK69xx) also needed to be tweaked, but that isn't expected to work on real printers yet due to unknown control protocol bits. |
||
---|---|---|
dnp_data | ||
hiti_data | ||
icm | ||
lib70x | ||
lib2245 | ||
lib6145 | ||
testjobs | ||
.gitattributes | ||
.gitignore | ||
backend_canonselphy.c | ||
backend_canonselphyneo.c | ||
backend_common.c | ||
backend_common.h | ||
backend_dnpds40.c | ||
backend_hiti.c | ||
backend_kodak605.c | ||
backend_kodak1400.c | ||
backend_kodak6800.c | ||
backend_kodak8800.c | ||
backend_magicard.c | ||
backend_mitsu.c | ||
backend_mitsu.h | ||
backend_mitsu70x.c | ||
backend_mitsu9550.c | ||
backend_mitsud90.c | ||
backend_mitsup95d.c | ||
backend_panodata.h | ||
backend_shinkos1245.c | ||
backend_shinkos2145.c | ||
backend_shinkos6145.c | ||
backend_shinkos6245.c | ||
backend_sinfonia.c | ||
backend_sinfonia.h | ||
backend_sonyupd.c | ||
backend_sonyupdneo.c | ||
blacklist | ||
COPYING | ||
Makefile | ||
pano-split.sh | ||
README | ||
regression-gp.csv | ||
regression-gp.pl | ||
regression.csv | ||
regression.pl |
*************************************************************************** Unified Gutenprint/CUPS backend for various Dye-Sublimation photo printers Copyright (c) 2007-2024 Solomon Peachy <pizza@shaftnet.org> This free software comes with ABSOLUTELY NO WARRANTY and is licensed under the GNU GPL (v3 or later); see the 'COPYING' file for more details. SPDX-License-Identifier: GPL-3.0+ The latest version can be found at https://git.shaftnet.org/cgit/selphy_print.git For a list of known bugs and development plans, see: https://bugs.shaftnet.org/index.php?project=4 *************************************************************************** If you do not have one of the printers listed below, this backend is not relevant for you and you can just ignore all of this. Supported Printers: Canon SELPHY ES series Canon SELPHY CP series Ciaat Brava 21 Citizen CW-01 Citizen CW-02 / OP900II DNP DS40 / Citizen CX DNP DS80 / Citizen CX-W DNP DS80DX DNP DS-RX1 / DS-RX1HS / Citizen CY / CY-02 DNP DS620 / DS620A / Citizen CX-02 DNP DS820 / DS820A / Citizen CX-02W DNP QW410 / Citizen CZ-01 DNP DS480 DNP DS680 Fujifilm ASK-300 HiTi P461 (aka Prinhome) HiTi P510 series HiTi P520L HiTi P525L Kodak Professional 1400 Kodak 305 Photo Printer Kodak 605 Photo Printer Kodak 805 Photo Printer Kodak 6800 Photo Printer Kodak 6850 Photo Printer Kodak 7000 Photo Printer Kodak 8800 / 9810 Kodak 8810 Photo Printer Magicard Tango 2E Mitsubishi CP30DW Mitsubishi CP3800DW Mitsubishi CP9550D/DW/DW-S/DZ/DZ-S Mitsubishi CP9600D/DW Mitsubishi CP-D70DW and CP-D707DW Mitsubishi CP-D70DW-S and CP-D707DW-S Mitsubishi CP-D80DW Mitsubishi CP-D90DW Mitsubishi CP-K60DW-S Mitsubishi CP-M1A / CP-M1E Mitsubishi CP-M15 Mitsubishi CP-W5000DW Mitsubishi P95DW Mitsubishi P93DW Olmec OP1000 Shinko CHC-S1245 (aka Sinfonia E1 and DNP Q8) Shinko CHC-S2145 (aka Sinfonia S2) Shinko CHC-S2245 (aka Sinfonia S3) Shinko CHC-S6145 (aka Sinfonia CS2) Shinko CHC-S6245 (aka Sinfonia CE1) Sony UP-CR10L (aka DNP DS-SL10) Sony UP-CX1 Sony UP-DR80MD Sony UP-DR150 Sony UP-DR200 Sony UP-D895 Sony UP-D897 Sony UP-D898 series Sony UP-971AD Stryker SDP1000 Work-in-progress Printers: DNP M4 / Q4 DNP M8 DNP Q8 Fujifilm ASK-400 Fujifilm ASK-500 Fujifilm ASK-2000, ASK-2500, and ASK-4000 HiTi M610 (not X610!) HiTi P310L / P310W HiTi P322W HiTi P530D HiTi P710L HiTi P720L / P728L HiTi P750L HiTi P910L HiTi CS-200e / CS-220e ICI Imagedata OP900 Kodak 6900 / 6950 Kodak 7010 / 7015 Magicard Rio 2E (and other Magicard models) Mitsubishi CP3020D/DE and CP3020DA/DAE Mitsubishi CP9000DW, CP9500DW, and CP9600DW-S Mitsubishi CP9800DW, CP9800DW-S, CP9810DW, CP9820DW-S, and CP9820DW-AG Nidec Copal DPB-4000, DPB-6000, DPB-7000 Olmec OP900 Shinko CHC-S6145-5A (aka Sinfonia CS2-c) Sony UP-CR20L (aka DNP DS-SL20) Sony UP-DR80 Sony UP-D711MD Sony UP-970AD / UP-990AD Sony UP-991AD *************************************************************************** This intelligent backend is needed to utilize many common dye-sublimation photo printers under Linux, OSX, and other UNIX-like operating systems. Although these printers advertise themselves as standard USB Printer Class devices, they do not actually obey those specifications and require special two-way handshaking in order to successfully print. This backend only handles the low-level communication with these printers; it is not able to "render" arbitrary image data into a format these printers will accept, along with associated printing parameters/options. Consequently, this backend can only be used in conjunction with Gutenprint (http://gimp-print.sf.net), version 5.2.10 or newer. Code snapshots of this backend are bundled with Gutenprint, although this repository is the canonical upstream source and is developed independently. As such, when compared to any given Gutenprint release, the code found here has additional features, device support, and bugfixes. At the same time, it may have half-developed features that don't quite work, with giant bugs that come out at midnight to eat your cat. So, while it is safe to use code in this repository with an older Gutenprint release, supporting for newer models or printing options that affect image rendering willl likely requires up-to-date Gutenprint code, Most printer support in selphy_print (and Gutenprint) was developed without any assistance from the printer manufactuers, relying on reverse-engineering and a great deal of experimentation. On that note, please keep in mind that this software distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY WHATSOEVER. *************************************************************************** This backend also supports a "standalone" mode that performs various utility functions for most models, such as querying status and configuring parameters. The exact commands supported for each printer are documented below. *************************************************************************** Compilation: This tool requires libusb 1.0 to build. We highly recommend v1.0.16 or newer due to general stability improvements. Versions older than 1.0.10 will require -DLIBUSB_PRE_1_0_10 to be defined (see the Makefile). To further complicate things, libusb-1.0 had a temporary fork called libusbx, but that was merged back into libusb as of v1.0.18. Consequently, your distribution package for libusb-1.0 may be called libusbx instead. Additionally, you will need the CUPS development packages installed, so we can figure out how the local CUPS instance is configured. Lastly, in order to integrate the backend into an existing Gutenprint installation you will need to install the Gutenprint development headers. Fedora/RedHat: yum install libusb1-devel cups-devel gutenprint-devel Debian/Ubuntu apt-get install libusb-1.0-0-dev libcups2-dev libgutenprint-dev All you need to do after that is type 'make' Compilation for Windows: This is highly experimental. Currently only MinGW is supported. You will need the 'libltdl' and 'libusbx' MinGW packages. Once the necessary packages are installed, run 'mingw64-make' and everything should compile cleanly. Please note that actually running this under Windows will require use/installation of a generic USB driver such as WINUSB. For more information, see: http://zadig.akeo.ie Another note. If you are using a NEC/Renesas USB 3.0 host controller, you will need to ensure that it is using up-to-date drivers or no devices will enumerate. For more information, see: https://github.com/libusb/libusb/wiki/Windows *************************************************************************** CUPS backend usage: DEVICE_URI=someuri \ gutenprint53+usb job-id user title num-copies options [ filename ] The backend generates output for CUPS to parse, including logging print counts, reporting loaded media types, and remaining media counts. Please note that this backend merely handles the low-level communication with the printer! Actually generating print jobs requires use of Gutenprint compiled with support for CUPS. DEVICE_URI=someuri CONTENT_TYPE=application/vnd.cups-command \ gutenprint53+usb job-id user title num-copies options [ filename ] This parses a CUPS command file and performs actions listed in the file. Implemented commands: ReportLevels Report the marker (ie media) type and levels. Other commands may be implemented in the future. Individual printer models may not implement these commands. Other Notes: 'someuri' is the URI returned by the backend when it probes for supported devices. is invoked by calling the backend with no arguments. The backend supports multiple URI schemes. First, the "modern" one: gutenprint53+usb://backendname/serialnum And the old/legacy/classic ones: gutenprint52+usb://manufacturer/model/?backend=backendname&serial=serialnum gutenprint52+usb://manufacturer/model/?serial=serialnum&backend=backendname The URI scheme generated at device probing depends on the version of gutenprint installed. By default, the modern scheme is used when compiled against Gutenprint 5.3 or newer, and the legacy scheme is used with Gutenprint 5.2. Regardless of the scheme generated at probe time, the backend will continue to detect and parse both schemes indefinitely as to not break backwards compatibility with existing deployments. To manually switch the URI scheme type generated at runtime, set the OLD_URI_SCHEME environment variable to either 0 or 1, as appropriate. *************************************************************************** Standalone usage: This backend is set up as a multi-call executable; that is to say behaivor changes based on the name used to invoke the executable. When compiled, a set of symlinks are created, corresponding to the generic name of each of the internal backends. Alternatively you may set the BACKEND environment variable to force a specific backend to be used. These commands are equivalent: BACKEND=backend ./gutenprint52+usb [ arguments ] ./backend [ arguments ] The 'backend' name is any one of the names listed when invoking the executable with no arguments. For example: ./dnpds40 DEBUG: Multi-Call Dye-sublimation CUPS Backend version 0.88 [ ... ] DEBUG: Standalone DNP DS-series / Citizen C-series backend version 0.106 DEBUG: supporting: dnp_citizen dnpds40 dnpds80 dnpds80dx dnpds620 dnpds820 dnprx1 citizencw01 citizencw02 citizencx02 [ ... ] The first entry after 'supporting' is the generic backend name, while the others correspond to specific models the backend supports. Any one can be used as the 'backend' name. All backends support the following invocations: backend [ arguments ] backend [ arguments ] filename backend [ arguments ] - < filename somecommand | backend [ arguments ] - The 'filename' here refers to the raw spool data generated by Gutenprint (eg via its gimp plugin) or the Windows print-to-file output. All global arguments: -D Increment debug level [1] -G Display GPL text -f Enable fast return mode if possible [2] -d numcopies Print 'numcopies' of the supplied job -v Silence all output except for warnings/errors [1] This argument can be repeated to increase the debug level. Alternatively, the 'DYESUB_DEBUG' environment variable can be used. For example, '-DDD' and 'DYESUB_DEBUG=3' are equivalent. DYESUB_DEBUG=1 Enable debug output DYESUB_DEBUG=2 Dump contents of short messges DYESUB_DEBUG=3 Dump contents of all messages [2] This terminates the backend as soon as the printer has accepted the print job, without waiting for the print job to complete. Not all printers support this feature. This can also be enabled by setting the 'FAST_RETURN' environment variable. This is the default behavior when using this backend with CUPS. Finally, some backends support additional arguments; see their details below. *************************************************************************** Other Environment Variables: If you have multiple models of the same printer family connected simultaneously, the backend will choose the first one it finds. If you wish to target a specific device, you may specify its serial number using the 'SERIAL' environment variable. For example: SERIAL=N782 backend filename [ arguments ] All backends support an additional operational mode, to test out unknown models. To use this mode, specify the VID, PID and its internal device type as environment variables: EXTRA_VID=04a9 EXTRA_PID=3ab1 EXTRA_TYPE=7 backend filename The VID and PID are specified in hexidecimal, and the TYPE is the P_XXX enumeration defined in backend_common.h. The '7' in this example corresponds to most Canon SELPHY CP models, and is what you would use if you were trying to get the backend to detect an otherwise unrecognized SELPHY CP model. If you are able to successfuly print using this technique, please let us know so we can add the apppriate entry to the internal database. For debugging USB operation, there following environment variables can be set: MAX_XFER_SIZE Maximum transfer size, in bytes. XFER_TIMEOUT Timeout, in milliseconds, for all USB operations for example: MAX_XFER_SIZE=32768 XFER_TIMEOUT=30000 backend filename To change the location of backend data at runtime, set CORRTABLE_PATH to the appropriate directory. Finally, BACKEND_QUIET can be set to a non-zero value to silence all output other than warnings and errors. *************************************************************************** Standalone status queries: If you just want to query the printer and media status in a printer-independent manner, the backend supports reporting a standard set of data in either textual or JSON format. This is used with the BACKEND_STATS_ONLY environment variable: BACKEND_STATS_ONLY=? BACKEND=backend [SERIAL=??] ./gutenprint53+usb BACKEND_STATS_ONLY=? [SERIAL=??] ./backend BACKEND_STATS_ONLY=1 will report in textual format, for example: Backend: HiTi Photo Printers Version: 0.100 / 0.16 Timestamp: 2019-1 2-13 14:54:28 Manufacturer: HiTi Model: HiTi:Usb Photo Printer:HiTi P520L Serial Number: 2WC4A1013968279 Firmware Version: 1.21.0.i Printer Status: Idle Lifetime Prints: 194 Media 0 Type: 4x6 Media 0 Level: 313 / 500 BACKEND_STATS_ONLY=2 will report in JSON format, for example: { "backend": "HiTi Photo Printers", "version": "0.100 / 0.16", "timestamp": "2019-12-13 14:57:38", "manufacturer": "HiTi", "model": "HiTi:Usb Photo Printer:HiTi P520L", "serial": "2WC4A1013968279", "firmware": "1.21.0.i", "status": "Idle", "counters": { "lifetime": 194 }, "media": [ { "type": "4x6", "level": "OK", "levelnow": 313, "levelmax": 500 } ] } *************************************************************************** BACKEND=canonselphy Model IDs recognized: canon-cp10 canon-cp100 canon-cp200 canon-cp220 canon-cp300 canon-cp330 canon-cp400 canon-cp500 canon-cp510 canon-cp520 canon-cp530 canon-cp600 canon-cp710 canon-cp720 canon-cp730 canon-cp740 canon-cp750 canon-cp760 canon-cp770 canon-cp780 canon-cp790 canon-cp800 canon-cp810 canon-cp900 canon-es1 canon-es2 canon-es20 canon-es3 canon-es30 canon-es40 Model IDs for backwards compatibility with older releases: selphycp10 selphycp100 selphycp200 selphycp220 selphycp300 selphycp330 selphycp400 selphycp500 selphycp510 selphycp520 selphycp530 selphycp600 selphycp710 selphycp720 selphycp730 selphycp740 selphycp750 selphycp760 selphycp770 selphycp780 selphycp790 selphycp800 selphycp810 selphycp900 selphyes1 selphyes2 selphyes20 selphyes3 selphyes30 selphyes40 Verified supported printers: ES1, ES2, ES3, ES30, ES40, CP-10, CP-100, CP-200, CP-300, CP-330, CP400, CP500, CP510, CP710, CP720, CP730, CP740, CP750, CP760, CP770, CP780, CP790, CP800, CP900 Untested, but expected to work: ES20, CP-220, CP520, CP530, CP600, CP810 Valid commands: -R Reset printer to factory defaults -s Query printer status Notes: * The SELPHY ES3 and ES30 cannot report the loaded media type * All models can report media empty, but not quantity remaining *************************************************************************** BACKEND=canonselphyneo Model IDs recognized: canon-cp820 canon-cp910 canon-cp1000 canon-cp1200 canon-cp1300 canon-cp1500 Model IDs for backwards compatibility with older releases: selphycp820 selphycp910 selphycp1000 selphycp1200 selphycp1300 Verified supported printers: CP1000, CP1200, CP1300, CP1500 Untested, but expected to work: CP820, CP910 Valid commands: -R Reset printer to factory defaults -s Query printer status Notes: * All models can report media empty, but not quantity remaining *************************************************************************** BACKEND=kodak1400 Additional model IDs recognized: kodak-1400 kodak-805 mitsubishi-3020d mitsubishi-3020da, mitsubishi-3020dae mitsubishi-3020de mitsubishi-3020du Model IDs for backwards compatibility with older releases: kodak1400 kodak805 mitsu3020d mitsu3020da Verified supported printers: Kodak 1400 Kodak 805 Work-in-progress printers: Mitsubishi CP3020D/DE Mitsubishi CP3020DA/DAE Valid commands: -C filename Set tone curve [1] Notes: * These models cannot report media type or remaining levels, but are able to report out of media conditions. [1] Format of curvedata file: 256 entries each of Yellow, Magenta, Cyan mappings: Values are unsigned 16-bit big endian, between 0 and ??? (unsure as to the bit usage) *************************************************************************** BACKEND=kodak68x0 Model IDs recognized: kodak-6800 kodak-6850 Model IDs for backwards compatibility with older releases: kodak6800 kodak6850 Verified supported printers: Kodak 6800 Kodak 6850 Development was sponsored in part by: LiveLink Technology [ www.livelinktechnology.net ] Valid commands: -c filename Query tone curve [1] -C filename Set tone curve [1] -l filename Query Current tone curve from RAM [1] -L filename Store Current tone curve in RAM [1] -m Query media information -s Query printer status -R Reset printer to factory defaults -X id Cancel print job 'id' [2] Notes: [1] Format of curvedata file: 256 entries each of Yellow, Magenta, Cyan mappings: Values are unsigned 16-bit big endian, between 0 and 16383 (ie 14-bit) [2] Job ID is the Internal Job ID (reported via status) This cancels a multi-copy print job. To see which jobs are active/pending, see the output of the '-s' command, specifically the 'Bank' output. *************************************************************************** BACKEND=kodak605 Additional model IDs recognized: kodak-605, kodak-7000, kodak-7010, kodak-7015, Verified supported printers: Kodak 605 Kodak 7000 Work-in-progress printers: Kodak 7010/7015 Valid commands: -b [ 0 | 1 ] Disable or Enable the printer control panel -c filename Query User tone curve from flash [1] -C filename Store User tone curve in flash [1] -e Query error log -F Flash printer LEDs for 5 seconds -i Query printer firmware information -l filename Query Current tone curve from RAM [1] -L filename Store Current tone curve in RAM [1] -m Query media information -r Reset User tone curve to default [3] -R Reset printer to factory defaults -s Query printer status -X id Cancel print job 'id' [2] Notes: [1] Format of curvedata file: 256 entries each of Yellow, Magenta, Cyan mappings: Values are unsigned 16-bit big endian, between 0 and ??? (unsure as to the bit usage) [2] Job ID is the Internal Job ID (reported via status) This cancels a multi-copy print job. To see which jobs are active/pending, see the output of the '-s' command, specifically the 'Bank' output. [3] Default printer tone curve is a linear 'val << 3' *************************************************************************** BACKEND=kodak8800 Additional model IDs recognized: kodak-8800, kodak-9810 Verified Supported printers: Kodak 8800/9810 Valid commands: -e [ 1|2|3 ] Query error logs -i Query printer info -m Query media info -n Query counters -X id Cancel job (0 for all/current) *************************************************************************** BACKEND=shinkos2145 Model IDs recognized: shinko-chcs2145 sinfonia-chcs2145 olmec-op1000 Verified supported printers: Shinko CHC-S2145 (aka "Sinfonia S2") Olmec OP1000 Work-in-process printers: HiTi P710L Development was sponsored in part by: LiveLink Technology [ www.livelinktechnology.net ] In order to use this backend, you will need to ensure the printer is configured to use the 'DRV' (as opposed to 'DLL') operating mode. See the printer documentation for details on how to set this. Valid commands: -b [ 0 | 1 ] Disable or Enable the printer control panel -c filename Query User tone curve from flash [1] -C filename Store User tone curve in flash [1] -e Query Error log -F Flash printer LEDs for 5 seconds -i Query printer firmware information -l filename Query Current tone curve from RAM [1] -L filename Store Current tone curve in RAM [1] -m Query media information -r Reset User tone curve to default [4] -R Reset printer to factory defaults -s Query printer status -u Query user string -U somestring Set user string to 'somestring' -X id Cancel print job 'id' [3] Notes: [1] Format of curvedata file: 256 entries each of Yellow, Magenta, Cyan mappings: Values are unsigned 16-bit big endian, between 0 and 2047 (ie only 11 bits used) [3] Job ID is the Internal Job ID (reported via status) This cancels a multi-copy print job. To see which jobs are active/pending, see the output of the '-s' command, specifically the 'Bank' output. [4] Default printer tone curve is a linear 'val << 3' *************************************************************************** BACKEND=shinkos1245 Low-level documentation was provided by Sinfonia, Inc. Thank you! Model IDs recognized: shinko-chcs1245 sinfonia-chcs1245 Verified supported printers: Shinko CHC-S1245 (aka "Sinfonia E1") Unsupported printers (unknown VID/PID): DNP Q8 Valid commands: -s Query printer status -m Query media information -u Query user string -U somestring Set user string to 'somestring' -X id Cancel print job 'id' [1] -R Reset printer to factory defaults -F Tone curve commands affect FINE table -c filename Query User tone curve from flash [2] -C filename Store User tone curve in flash [2] -l filename Query Current tone curve from RAM [2] -L filename Store Current tone curve in RAM [2] Notes: [1] Job ID is the Internal Job ID (reported via status) This cancels a multi-copy print job. To see which jobs are active/pending, see the output of the '-s' command, specifically the 'Bank' output. [2] Format of tone curve file: 256 entries each of Yellow, Magenta, Cyan mappings: Values are unsigned 16-bit big endian, between 0 and 16383 (ie only 14 bits used) *************************************************************************** BACKEND=shinkos6145 Low-level documentation was provided by Sinfonia and CIAAT. Thank you! Model IDs recognized: sinfonia-chcs6145 ciaat-brava-21 shinko-chcs6145 sinfonia-chcs2245 hiti-m610 kodak-6900 kodak-6950 Model IDs for backwards compatibility with older releases: shinks6145 brava21 Verified supported printers: Ciaat Brava 21 Shinko CHC-S6145 (aka "Sinfonia CS2") Sinfonia CHC-S2245 (aka "S3") Work-in-progress printers: HiTi M610 Kodak 6900 / 6950 Shinko CHC-S6145-5A (aka "CS2-c") *** VERY IMPORTANT *** In order to generate usable output, the Sinfonia CHC-S6145 and CHC-S2245 printers (and their siblings listed above) require the input data to be transformed using specific image processing algorithms. The library that implements this processing is dynamically loaded at runtime. There are three options: * libS6145ImageProcess and S2245IP -- Supported by Sinfonia, these are proprietary libraries. They can be obtained by politely contacting your local Sinfonia distributor. If you have the appropriate permission fron Sinfonia and their technical and legal limitations are acceptible to you, we recommend you use these official supported libraries. * libS6145ImageReProcess and libS2245ImageReProcess -- GPL'd re-implementations of the Sinfonia algorithms, available as source. They are drop-in replacement that appears to generate identical output to the proprietary Sinfonia libraries. DISCLAIMER: Sinfonia Inc was not involved in the creation of these libraries and is not responsible in any way for any deficiencies in its output. They will provide no support if it is used. Do *NOT* contact Sinfonia for support if you are using libS6146ImageReProcess or libS2245ImageReProcess! (Please see the full disclaimer in libS6145ImageReProcess.c and libS2245ImageReProcess.c) As selphy_print is released under the terms of the GPL, it cannot normally be combined with proprietary libraries. Therefore, the authors of selphy_print grant its users an additional permission (under section 7 of the GPLv3) to combine and/or redistribute it with the proprietart libS6145ImageProcess and/or S2245IP libraries. For the full text of this license exception, please see the header of backend_shinkos6145.c Valid commands: -c filename Query User tone curve from flash [1] -C filename Store User tone curve in flash [1] -e Query Error log -F Flash printer LEDs for 5 seconds -i Query printer firmware information -k num Specify standby delay (5-240 minutes) -l filename Query Current tone curve from RAM [1] -L filename Store Current tone curve in RAM [1] -m Query media information -q filename Dump eeprom data [4] -Q filename Dump image correction data [4] -r Reset User tone curve to default [3] -R Reset printer to factory defaults -s Query printer status -X id Cancel print job 'id' [2] Notes: [1] Format of curvedata file: 256 entries each of Yellow, Magenta, Cyan mappings: Values are unsigned 16-bit big endian, between 0 and 2047 (ie only 11 bits used) [2] Job ID is the Internal Job ID (reported via status) This cancels a multi-copy print job. To see which jobs are active/pending, see the output of the '-s' command, specifically the 'Bank' output. [3] Default printer tone curve is a linear 'val << 3' [4] This is used as an input to the image processing code, and is only useful for debugging purposes. *************************************************************************** BACKEND=shinkos6245 Low-level documentation was provided by Sinfonia, Inc. Thank you! Model IDs recognized: sinfonia-chcs6245 hiti-p910l shinko-chcs6245 kodak-8810 Model IDs for backwards compatibility with older releases: shinkos6245 hitip910 Verified supported printers: Kodak 8810 Shinko CHC-S6245 (aka "Sinfonia CE1") Work-in-process printers: HiTi P910L Valid commands: -b [ 0 | 1 ] Disable or Enable the printer control panel [4] -c filename Query User tone curve from flash [1] -C filename Store User tone curve in flash [1] -e Query Error log -F Flash printer LEDs for 5 seconds -i Query printer firmware information -k num Specify standby delay (5-240 minutes) -l filename Query Current tone curve from RAM [1] -L filename Store Current tone curve in RAM [1] -m Query media information -r Reset User tone curve to default [3] -R Reset printer to factory defaults -s Query printer status -X id Cancel print job 'id' [2] Notes: [1] Format of curvedata file: 256 entries each of Yellow, Magenta, Cyan mappings: Values are unsigned 16-bit big endian, between 0 and 2047 (ie only 11 bits used) [2] Job ID is the Internal Job ID (reported via status) This cancels a multi-copy print job. To see which jobs are active/pending, see the output of the '-s' command, specifically the 'Bank' output. [3] Default printer tone curve is a linear 'val << 3' [4] Kodak 8810 only *************************************************************************** BACKEND=sonyupd Additional model IDs recognized: sony-updr150 sony-updr200 sony-upcr10l sony-upd711 sony-upd895 sony-upd897 dnp-sl10 fujifilm-ask-2500 ndc-dpb-7000 Model IDs for backwards compatibility with older releases: sonyupdr150 sonyupdr200 sonyupcr10 Verified supported printers: Sony UP-CR10L Sony UP-CX1 Sony UP-D895 Sony UP-D897 Sony UP-DR150 Sony UP-DR200 Untested, but expected to work: DNP DS-SL10 Work-in-progress printers: Nidec Copal DPB-4000, DPB-6000, DPB-7000 Fujifilm ASK-2000, ASK-2500, ASK-4000 DNP Q8 Sony UP-D711MD Valid commands: -s Query printer status Notes: * These models cannot report media type or remaining levels, but are able to report out of media conditions. *************************************************************************** BACKEND=sonyupdneo Model IDs recognized: sony-upcr20l sony-upd898 sony-updr80 sony-updr80md dnp-sl20 Verified supported printers: Sony UP-DR80MD Stryker SDP1000 Sony UP-D898 / UP-X898 Sony UP-971AD Work-in-progress printers Sony UP-DR80 Work-in-progress printers (Lack USB PIDs) Sony UP-991AD Sony UP-CR20L DNP DS-SL20 Valid commands: -s Query printer status Notes: * The UP-D89x series is unable to report media type or levels, but can report media empty conditions. *************************************************************************** BACKEND=mitsu70x Model IDs recognized: mitsubishi-d70dw mitsubishi-d80dw mitsubishi-k60dw fujifilm-ask-300 mitsubishi-d707dw mitsubishi-k60dws dnp-ds480 dnp-ds680 Model IDs for backwards compatibility with older releases: kodak-305 mitsud80 mitsuk60 kodak305 fujiask300 Verified supported printers: DNP DS480 DNP DS680 Fujifilm ASK-300 Kodak 305 Mitsubishi CP-D70DW Mitsubishi CP-D70DW-S Mitsubishi CP-D707DW Mitsubishi CP-D707DW-S Mitsubishi CP-D80DW Mitsubishi CP-K60DW-S Unsupported printers (Unknown USB PIDs): Mitsubishi CP-D80DW-S Development was sponsored in part by: Schreiber & Freunde GmbH & Co. KG Three generous benefactors who wish to remain anonymous *** VERY IMPORTANT *** In order to generate usable output, this family of printers require the input data to be transformed using specific image processing algorithms. The library that implements this processing is dynamically loaded at runtime. There is currently only one option: * libMitsuD70ImageReProcess -- GPL'd re-implementation of the Mitsubishi algorithms, available as source. No guaranteees are made about its output quality versus Mitsubishi's proprietary drivers, but is generally considerd quite good. DISCLAIMER: Mitsubishi was not involved in the creation of libMitsuD70ImageReProcess and is not responsible in any way for any deficiencies in its output. They will provide no support if it is used. Do *NOT* contact Mitsubishi for support if you are using any combination of gutenprint, selphy_print or libMitsuD70ImageReProcess. (Please see the full disclaimer in libMitsuD70ImageReProcess.c) Valid commands: -j Query Job status -k num Specify standby delay (1-60 minutes, 0 disables) -s Query printer status -w Wake up printer -W Wake up printer (and wait) -x num Set USB iSerialNumber reporting (1 yes, 0 no) [1] -X id Cancel print job 'id' [2] [1] Printer will need to be power-cycled for this to take effect. [2] Job ID is the Internal Job ID (reported via job status query) *************************************************************************** BACKEND=mitsud90 Model IDs recognized: mitsubishi-d90dw mitsubishi-cpm1 mitsubishi-cpm1 fujifilm-ask-500 Verified supported printers: Mitsubishi CP-D90DW Mitsubishi CP-M1A / CP-M1E Mitsubishi CP-M15E Mitsubishi CP-W5000DW Unsupported printers (Unknown VID/PID): Fujifilm ASK-500 *** VERY IMPORTANT *** The CP-M1/ASK500 family is similar to the CP-D70 family in that it requires the input data to be gamma corrected (and transformed in other ways) before it is sent to the printer. Consideeable progress has been made, and the implementation is considered feature-complete. In theory, the output quality should be comparable to Mitsubishi's own drivers. This code has been implemented in the lib70 driver, and note that while feature complete, it has NOT been tested. Mitsubishi was *NOT* involved in the creation of this library, and is not responsible in any way for the library or any deficiencies in its output. They will provide no support if it is used. Valid commands: -i Query printer information -j jobid Query job status [1] -k num Specify standby delay (1-255 minutes, 0 disables) -m Query printer media -s Query printer status -x num Set USB iSerialNumber reporting (1 yes, 0 no) [2] [1] Job ID is the Internal Job ID (reported via job status query) [2] Printer will need to be power-cycled for this to take effect. Only valid for CP-D90 *************************************************************************** BACKEND=mitsu9xxx Model IDs recognized: mitsubishi-9000dw mitsubishi-9500dw mitsubishi-9500dw-s mitsubishi-9550dw mitsubishi-9550dw-s mitsubishi-9600dw mitsubishi-9600dw-s mitsubishi-9800dw mitsubishi-9800dw-s mitsubishi-9810dw mitsubishi-9550d mitsubishi-9550dz mitsubishi-9800d mitsubishi-9800dz mitsubishi-9810d mitsubishi-9820dw-ag Model IDs for backwards compatibility with older releases: mitsu9000 mitsu9500 mitsu9550 mitsu9600 mitsu9800 mitsu9810 Verified supported printers: Mitsubishi CP9550D/DW and CP9550DZ/DZS/DW-S Mitsubishi CP9600D/DW Mitsubishi CP9800DZ/DZS/DW-S [1] Mitsubishi CP30DW [2] Untested, but expected to work: Mitsubishi CP9550DW-U Mitsubishi CP9600DW-S/DZ/DZ-S Mitsubishi CP9800D/DW [1] Mitsubishi CP9810D/DW [1] Mitsubishi CP9820DW-S [1] Work-in-progress printers: Mitsubishi CP9000D/DW Mitsubishi CP9500D/DW/DW-S Mitsubishi CP9550DW-A Mitsubishi CP9820DW-AG Valid commands: -s Query printer status -m Query printer media -X Cancel current job Notes: [1] **** VERY IMPORTANT **** The CP-98xx family is similar to the CP-D70 family in that it requires the input data to be gamma corrected (and transformed in other ways) before it is sent to the printer. Considerable progress has been made in decoding the CP-98xx data tables and algorithms, and everything but sharpening has now been implemented. In theory, the output quality should be comparable to Mitsubishi's own drivers. This code has been implemented in the lib70 driver, and note that while feature complete, it has NOT been tested. Mitsubishi was *NOT* involved in the creation of this library, and is not responsible in any way for the library or any deficiencies in its output. They will provide no support if it is used. [2] **** VERY IMPORTANT **** The CPD30 family also relies on the lib70x library in order to do the 3D LUT and sharpening transforms. All of the above disclaimers apply. *************************************************************************** BACKEND=mitsup9x Model IDs recognized: mitsubishi-p95d mitsubishi-p93d Model IDs for backwards compatibility with older releases: mitsup95d mitsup93d Development was sponsored by: A benefactor who wishes to remain anonymous Verified supported printers: Mitsubishi P95DW Mitsubishi P93DW Valid commands: -s Query printer status Notes: * These models cannot report media type or remaining levels, but are able to report out of media conditions. *************************************************************************** BACKEND=dnp_citizen Model IDs recognized: dnp-ds40 dnp-ds80 dnp-ds80dx dnp-ds620 dnp-ds820 dnp-dsrx1 dnp-ds620 dnp-qw410 citizen-cw-01 citizen-cw-02 citizen-cx-02 citizen-cx citizen-cx-w citizen-cy citizen-cy-02 citizen-op900 citizen-op900ii citicen-cx-02w citizen-cz-01 Model IDs for backwards compatibility with older releases: dnpds40 dnpds90 dnpds80dx dnpds620 dnpds820 dnpdsrx1 citizencw01 citizencw02 citizencx02 Verified supported printers: DNP DS40 (aka Citizen CX) DNP DS80 (aka Citizen CX-W) DNP DS80DX DNP DS620 / DS620A (aka Citizen CX-02) DNP DS820 / DS820A (aka Citizen CX-02W) DNP DS-RX1 / DNP DS-RX1HS (aka Citizen CY and CY-02) DNP DS-QW410 Untested, but expected to work: Citizen CW-01 / OP900 Citizen CW-02 / OP900II Citizen CX-02 Citizen CZ-01 Mitsubishi CP3800DW Unsupported printers (Unknown VID/PID): DNP M4 / Q4 Olmec OP900 ICI Imagedata OP900 Fujifilm ASK-400 Development was sponsored in part by: Marco Di Antonio LiveLink Technology [ www.livelinktechnology.net ] Multiple generous benefactors who whish to remain anonymous This backend supports additional commands: -i Query printer information (resolution, etc) -I Query printer sensor information -n Query printer counters -N [ A | B | M ] Reset Counter A/B/M [2] -p num Set 'P' counter to 'num' [2] -s Query printer status -k num Specify standby delay (1-99 minutes, 0 disables) [1] -K num Keep Media Status Across Power Cycles (1 yes, 0 no) [4] -x num Set USB iSerialNumber reporting (1 yes, 0 no) [3] -X Cancel current job -R Reset printer to defaults Notes: [1] Only supported by DS620 and DS820 [2] Certain printer features may require updating the printer firmware [3] Only supported by RX1HS, DS620, DS820, and QW410 [4] Only supported by DS620, DS820, and QW410 *************************************************************************** BACKEND=magicard Model IDs recognized: magicard-tango-2e magicard-enduro magicard-enduroplus magicard-rio-2e Model IDs for backwards compatibility with older releases: tango2e enduro enduroplus Verified supported printers: Tango 2E Unsupported printers (Unknown VID/PID): Rio 2E Tango +L Enduro Enduro+ (And all others) This backend supports additional commands: magicard [command [arg] ] Valid commands: -s Query printer status -q Generate printer information dump -I Query printer sensors -T Print self-test card -E Eject card in printer -R Reset printer Notes: * These models cannot report media type or remaining levels, but are able to report out of media conditions. *************************************************************************** BACKEND=hiti Model IDs recognized: hiti-p310l hiti-p310w hiti-p320w hiti-p461 hiti-p510k hiti-p510l hiti-p510s hiti-p510si hiti-p518a hiti-p518s hiti-p520l hiti-p525l hiti-p52x hiti-p530 hiti-p720l hiti-p728l hiti-p750l hiti-cs200e hiti-cs220e hiti-cs230e hiti-cs250e hiti-cs290e Verified supported printers: HiTi P461 (aka Prinhome) HiTi P510 series HiTi P520L HiTi P525L Untested, but expected to work: HiTi P518 series HiTi P720L / P728L HiTi P750L Work-in-progress printers: HiTi CS2x0 series HiTi P310 series HiTi P32x series HiTi P530D This backend supports additional commands: hiti [command [arg] ] Valid commands: -i Query printer information -r Soft reset printer -R Reset printer to factory defaults -s Query printer status Notes: * Firmware v1.19-v1.21 for the P520L has a major issue that results in bulk data transfers not functioning under Linux. This problem also affected HiTi's semi-official Linux drivers, and was finally fixed in v1.22. ***************************************************************************