***************************************************************************
Unified Gutenprint/CUPS backend for various Dye-Sublimation photo printers
Copyright (c) 2007-2019 Solomon Peachy <pizza@shaftnet.org>
This free software comes with ABSOLUTELY NO WARRANTY and is licensed under
the GNU GPL (v3 or later); see the 'COPYING' file for more details.
SPDX-License-Identifier: GPL-3.0+
The latest version can be found at
http://git.shaftnet.org/cgit/selphy_print.git
For a list of known bugs and development plans, see:
http://bugs.shaftnet.org/index.php?project=4
***************************************************************************
If you do not have one of the printers listed below, this backend is
not relevant for you and you can just ignore all of this.
Supported Printers:
Canon SELPHY ES series
Canon SELPHY CP series
Ciaat Brava 21
Citizen CW-01
Citizen CW-02 / OP900II
DNP DS40 / Citizen CX
DNP DS80 / Citizen CX-W
DNP DS-RX1 / DS-RX1HS / Citizen CY / CY-02
DNP DS620 / DS620A / Citizen CX-02
DNP DS820 / DS820A
Fujifilm ASK-300
Kodak Professional 1400
Kodak 305 Photo Printer
Kodak 605 Photo Printer
Kodak 805 Photo Printer
Kodak 6800 Photo Printer
Kodak 6850 Photo Printer
Magicard Tango 2E
Mitsubishi CP-3800DW
Mitsubishi CP-9550D/DW/DW-S/DZ/DZ-S
Mitsubishi CP-9600D/DW
Mitsubishi CP-D70DW and CP-D707DW
Mitsubishi CP-D80DW
Mitsubishi CP-K60DW-S
Mitsubishi CP-D90DW
Mitsubishi P95DW
Mitsubishi P93DW
Shinko CHC-S1245 (aka Sinfonia E1)
Shinko CHC-S2145 (aka Sinfonia S2)
Shinko CHC-S6145 (aka Sinfonia CS2)
Sony UP-CR10L (aka DNP DS-SL10)
Sony UP-DR150
Sony UP-DR200
Sony UP-D895
Sony UP-D897
Work-in-progress Printers:
DNP DS80DX
HiTi P910L
ICI Imagedata OP900
Kodak 6900
Kodak 7000 / 7010 / 7015
Kodak 8810
Magicard Rio 2E (and other Magicard models)
Mitsubishi CP-3020D/DE and CP-3020DA/DAE
Mitsubishi CP-9000DW, CP-9500DW, and CP-9600DW-S
Mitsubishi CP-9800DW, CP-9800DW-S, CP-9810DW, and CP-9820DW-S
Olmec OP900
Shinko CHC-S2245 (aka Sinfonia S3)
Shinko CHC-S6145-5A (aka Sinfonia CS2-c)
Shinko CHC-S6245 (aka Sinfonia CE1)
Sony UP-CR20L (aka DNP DS-SL20)
Sony UP-D898 series
Sony UP-DR80 series
***************************************************************************
This intelligent backend is needed to utilize many common dye-sublimation
photo printers under Linux, OSX, and other UNIX-like operating systems.
Although these printers advertise themselves as standard USB Printer Class
devices, they do not actually obey those specifications and require
special two-way handshaking in order to successfully print.
This backend can only be used in conjunction with Gutenprint 5.2.10 or
newer. Please see the Gutenprint README file (section II D) for more
information on use of this backend and integration into CUPS.
While this repository is considered the canonical upstream source for
this code, code snapshots are bundled with each Gutenprint release.
Generally speaking, the code in this repository will require the current
Gutenprint release (or pre-release) to generate the actual print jobs.
As such, when compared to any given Gutenprint release, the code found
here is usually newer, with additional features, device support, and
bugfixes. At the same time, it may have half-developed features that
don't quite work, with giant bugs that come out at midnight to eat
your cat.
With few exceptions, all printer support in selphy_print (and Gutenprint)
was developed without any assistance from the printer manufactuers,
relying on reverse-engineering and a great deal of experimentation.
On that note, please keep in mind that this software distributed
in the hope that it will be useful, but WITHOUT ANY WARRANTY WHATSOEVER.
***************************************************************************
This backend also supports a "standalone" mode that performs various
utility functions for most models, such as querying status and
configuring parameters. The exact commands supported for each
printer are documented below.
***************************************************************************
Compilation:
This tool requires libusb 1.0 to build. We highly recommend
v1.0.16 or newer due to general stability improvements. Versions
older than 1.0.10 will require -DLIBUSB_PRE_1_0_10 to be defined
(see the Makefile).
To further complicate things, libusb-1.0 had a temporary fork called
libusbx, but that was merged back into libusb as of v1.0.18.
Consequently, your distribution package for libusb-1.0 may be
called libusbx instead.
Additionally, you will need the CUPS development packages installed,
so we can figure out how the local CUPS instance is configured.
Lastly, in order to integrate the backend into an existing Gutenprint
installation you will need to install the Gutenprint development
headers.
Fedora/RedHat:
yum install libusbx-devel libusb1-devel cups-devel gutenprint-devel
Debian/Ubuntu
apt-get install libusbx-dev libusb-1.0-0-dev libcups2-dev gutenprint-dev
All you need to do after that is type 'make'
***************************************************************************
CUPS backend usage:
DEVICE_URI=someuri \
gutenprint52+usb job-id user title num-copies options [ filename ]
The backend generates output for CUPS to parse, including logging
print counts, and if the printer supports it, reporting media type and
remaining media counts.
Please note that this backend merely handles the low-level
communication with the printer! Actually generating print jobs requires
use of Gutenprint compiled with support for CUPS.
DEVICE_URI=someuri FINAL_CONTENT_TYPE=application/vnd.cups-command \
gutenprint52+usb job-id user title num-copies options [ filename ]
This parses a CUPS command file and performs actions listed in the file.
Implemented commands:
ReportLevels Report the marker (ie media) type and levels.
Other commands may be implemented in the future. Individual printer
models may not implement these commands.
Other Notes:
'someuri' is the URI returned by the backend when it probes for supported
devices. is invoked by calling the backend with no arguments.
The backend supports multiple URI schemes. First, the "modern" one:
gutenprint53+usb://backendname/serialnum
And the old/legacy/classic one:
gutenprint52+usb://manufacturer/model/?backend=backendname&serial=serialnum
The URI scheme generated at device probing depends on the version of
gutenprint installed. By default, the modern scheme is used when compiled
against Gutenprint 5.3 or newer, and the legacy scheme is used with
Gutenprint 5.2.
Regardless of the scheme generated at probe time, the backend will continue
to detect and parse both schemes indefinitely as to not break backwards
compatibility with existing deployments. To manually switch the URI
scheme type generated at runtime, set the OLD_URI_SCHEME environment
variable to either 0 or 1, as appropriate.
***************************************************************************
Standalone usage:
This backend is set up as a multi-call executable; that is to say
behaivor changes based on the name used to invoke the executable.
When compiled, a set of symlinks are created, corresponding to the generic
name of each of the internal backends. Alternatively you may set
the BACKEND environment variable to force a specific backend to be used.
These commands are equivalent:
BACKEND=backend ./gutenprint52+usb [ arguments ]
./backend [ arguments ]
The 'backend' name is any one of the names listed when invoking the
executable with no arguments. For example:
./dnpds40
DEBUG: Multi-Call Dye-sublimation CUPS Backend version 0.88
[ ... ]
DEBUG: Standalone DNP DS-series / Citizen C-series backend version 0.106
DEBUG: supporting: dnp_citizen dnpds40 dnpds80 dnpds80dx dnpds620 dnpds820 dnprx1 citizencw01 citizencw02 citizencx02
[ ... ]
The first entry after 'supporting' is the generic backend name, while
the others correspond to specific models the backend supports. Any one
can be used as the 'backend' name.
All backends support the following invocations:
backend [ arguments ]
backend [ arguments ] filename
backend [ arguments ] - < filename
somecommand | backend [ arguments ] -
The 'filename' here refers to the raw spool data generated by
Gutenprint (eg via its gimp plugin) or the Windows print-to-file
output.
All global arguments:
-D Increment debug level [1]
-G Display GPL text
-f Enable fast return mode if possible [2]
-d numcopies Print 'numcopies' of the supplied job
-v Silence all output except for warnings/errors
[1] This argument can be repeated to increase the debug level.
Alternatively, the 'DYESUB_DEBUG' environment variable can be
used. For example, '-DDD' and 'DYESUB_DEBUG=3' are equivalent.
DYESUB_DEBUG=1 Enable debug output
DYESUB_DEBUG=2 Dump contents of short messges
DYESUB_DEBUG=3 Dump contents of all messages
[2] This terminates the backend as soon as the printer has
accepted the print job, without waiting for the print job
to complete. Not all printers support this feature. This
can also be enabled by setting the 'FAST_RETURN' environment
variable. This is the default behavior when using this backend
with CUPS.
Finally, some backends support additional arguments; see their details
below.
***************************************************************************
Other Environment Variables:
If you have multiple models of the same printer family connected
simultaneously, the backend will choose the first one it finds.
If you wish to target a specific device, you may specify its
serial number using the 'SERIAL' environment variable. For example:
SERIAL=N782 backend filename [ arguments ]
All backends support an additional operational mode, to test out
unknown models. To use this mode, specify the VID, PID and its
internal device type as environment variables:
EXTRA_VID=04a9 EXTRA_PID=3ab1 EXTRA_TYPE=7 backend filename
The VID and PID are specified in hexidecimal, and the TYPE is
the P_XXX enumeration defined in backend_common.h. The '7' in this
example corresponds to most Canon SELPHY CP models, and is what you
would use if you were trying to get the backend to detect an
otherwise unrecognized SELPHY CP model.
If you are able to successfuly print using this technique,
please let us know so we can add the apppriate entry to the
internal database.
For debugging USB operation, there following environment variables
can be set:
MAX_XFER_SIZE Maximum transfer size, in bytes.
XFER_TIMEOUT Timeout, in milliseconds, for all USB operations
for example:
MAX_XFER_SIZE=32768 XFER_TIMEOUT=30000 backend filename
Finally, BACKEND_QUIET can be set to a non-zero value to silence all
output other than warnings and errors.
***************************************************************************
BACKEND=canonselphy
Model IDs recognized:
canon-cp10 canon-cp100 canon-cp200 canon-cp220 canon-cp300 canon-cp330
canon-cp400 canon-cp500 canon-cp510 canon-cp520 canon-cp530 canon-cp600
canon-cp710 canon-cp720 canon-cp730 canon-cp740 canon-cp750 canon-cp760
canon-cp770 canon-cp780 canon-cp790 canon-cp800 canon-cp810 canon-cp900
canon-es1 canon-es2 canon-es20 canon-es3 canon-es30 canon-es40
Model IDs for backwards compatibility with older releases:
selphycp10 selphycp100 selphycp200 selphycp220 selphycp300 selphycp330
selphycp400 selphycp500 selphycp510 selphycp520 selphycp530 selphycp600
selphycp710 selphycp720 selphycp730 selphycp740 selphycp750 selphycp760
selphycp770 selphycp780 selphycp790 selphycp800 selphycp810 selphycp900
selphyes1 selphyes2 selphyes20 selphyes3 selphyes30 selphyes40
Verified supported printers:
ES1, ES2, ES3, ES30, ES40, CP-10, CP-100, CP-200, CP-300, CP-330,
CP400, CP500, CP510, CP710, CP720, CP730, CP740, CP750, CP760, CP770,
CP780, CP790, CP800, CP900
Unverified/untested, but should work: (let us know, please!)
ES20, CP-220, CP520, CP530, CP600, CP810
Valid commands:
-R Reset printer to factory defaults
-s Query printer status
Notes:
* All models can report media empty, but not quantity remaining
* All models except the ES3 and ES30 can report media type
***************************************************************************
BACKEND=canonselphyneo
Model IDs recognized:
canon-cp820 canon-cp910 canon-cp1000 canon-cp1200 canon-cp1300
Model IDs for backwards compatibility with older releases:
selphycp820 selphycp910 selphycp1000 selphycp1200 selphycp1300
Verified supported printers:
CP1000, CP1200, CP1300
Untested, but expected to work:
CP820, CP910
Valid commands:
-R Reset printer to factory defaults
-s Query printer status
Notes:
* All models can report media empty, but not quantity remaining
* All models can report media type
***************************************************************************
BACKEND=kodak1400
Additional model IDs recognized:
kodak-1400 kodak-805
mitsubishi-3020d mitsubishi-3020da, mitsubishi-3020dae mitsubishi-3020de
mitsubishi-3020du
Model IDs for backwards compatibility with older releases:
kodak1400 kodak805 mitsu3020d mitsu3020da
Verified supported printers:
Kodak 1400
Kodak 805
Work-in-progress printers:
Mitsubishi CP3020D/DE
Mitsubishi CP3020DA/DAE
Valid commands:
-C filename Set tone curve [1]
Notes:
* This backend can report media empty, but not media type or remaining levels.
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and ???
(unsure as to the bit usage)
***************************************************************************
BACKEND=kodak68x0
Model IDs recognized:
kodak-6800 kodak-6850
Model IDs for backwards compatibility with older releases:
kodak6800 kodak6850
Verified supported printers:
Kodak 6800
Kodak 6850
Development was sponsored in part by:
LiveLink Technology [ www.livelinktechnology.net ]
Valid commands:
-c filename Query tone curve [1]
-C filename Set tone curve [1]
-m Query media information
-s Query printer status
-R Reset printer to factory defaults
-X id Cancel print job 'id' [2]
Notes:
* This backend reports media type and remaining levels.
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 16383
(ie 14-bit)
[2] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
***************************************************************************
BACKEND=kodak605
Additional model IDs recognized:
kodak-605
Verified supported printers:
Kodak 605
Unsupported printers (Unknown VID/PID):
Kodak 7000/7010/7015
Valid commands:
-C filename Set tone curve [1]
-m Query media information
-s Query printer status
-e Query error log
-X id Cancel print job 'id' [2]
Notes:
* This backend reports media type and remaining levels.
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and ???
(unsure as to the bit usage)
[2] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
***************************************************************************
BACKEND=shinkos2145
Model IDs recognized:
shinko-chcs2145 sinfonia-chcs2145
Verified supported printers:
Shinko CHC-S2145 (aka "Sinfonia S2")
Development was sponsored in part by:
LiveLink Technology [ www.livelinktechnology.net ]
In order to use this backend, you will need to ensure the printer is
configured to use the 'DRV' (as opposed to 'DLL') operating mode. See
the printer documentation for details on how to set this.
Valid commands:
-b [ 0 | 1 ] Disable or Enable the printer control panel.
-c filename Query User tone curve from flash [1]
-C filename Store User tone curve in flash [1]
-e Query Error log
-F Flash printer LEDs for 5 seconds
-i Query printer firmware information
-l filename Query Current tone curve from RAM [1]
-L filename Store Current tone curve in RAM [1]
-m Query media information
-r Reset User tone curve to default [4]
-R Reset printer to factory defaults
-s Query printer status
-u Query user string
-U somestring Set user string to 'somestring'
-X id Cancel print job 'id' [3]
Notes:
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 2047
(ie only 11 bits used)
[3] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
[4] Default printer tone curve is a linear 'val << 3'
***************************************************************************
BACKEND=shinkos1245
Low-level documentation was provided by Sinfonia, Inc. Thank you!
Model IDs recognized:
shinko-chcs1245 sinfonia-chcs1245
Verified supported printers:
Shinko CHC-S1245 (aka "Sinfonia E1")
Valid commands:
-s Query printer status
-m Query media information
-u Query user string
-U somestring Set user string to 'somestring'
-X id Cancel print job 'id' [1]
-R Reset printer to factory defaults
-F Tone curve commands affect FINE table
-c filename Query User tone curve from flash [2]
-C filename Store User tone curve in flash [2]
-l filename Query Current tone curve from RAM [2]
-L filename Store Current tone curve in RAM [2]
[1] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
[2] Format of tone curve file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 16383
(ie only 14 bits used)
***************************************************************************
BACKEND=shinkos6145
Low-level documentation was provided by Sinfonia and CIAAT. Thank you!
Model IDs recognized:
sinfonia-chcs6145 ciaat-brava-21 shinko-chcs6145
Model IDs for backwards compatibility with older releases:
shinks6145 brava21
Verified supported printers:
Ciaat Brava 21
Shinko CHC-S6145 (aka "Sinfonia CS2")
Unsupported printers (Unknown VID/PID)
Kodak 6900
Sinfonia CHC-S2245 (aka "S3")
*** VERY IMPORTANT ***
In order to generate usable output, the Sinfonia CHC-S6145 printer
(and its siblings) require the input data to be transformed using
specific image processing algorithms.
The library that implements this processing is dynamically loaded
at runtime. There are three options:
* libS6145ImageProcess -- Supported by Sinfonia, this is a proprietary
library only available for x86 and x86_64 linux targets. It can be
obtained by politely contacting your local Sinfonia distributor.
If you have the appropriate permission fron Sinfonia and its
technical and legal limitations are acceptible to you, we recommend
you use the supported libS6145ImageProcess library, as it will
generate the highest quality output.
* libS6145ImageReProcess -- GPL'd re-implementation of the Sinfonia
algorithms, available as source. It is a drop-in replacement
that appears to generate identical output to the proprietary
Sinfonia library.
DISCLAIMER: Sinfonia Inc was not involved in the creation of
libS6145ImageReProcess and is not responsible in any way for any
deficiencies in its output. They will provide no support if it is
used.
Do *NOT* contact Sinfonia for support if you are using
libS6146ImageReProcess!
(Please see the full disclaimer in libS6145ImageReProcess.c)
* If neither of the above libraries are found, the backend will
fall back to a very crude algorithm that generates low-quality
results not suitable for photographic output
As selphy_print is released under the terms of the GPL, it cannot
normally be combined with proprietary libraries.
Therefore, the authors of selphy_print grant its users an additional
permission (under section 7 of the GPLv3) to combine and/or redistribute
it with the libS6145ImageProcess library. For the full text of this
license exception, please see the header of backend_shinkos6145.c
Valid commands:
-c filename Query User tone curve from flash [1]
-C filename Store User tone curve in flash [1]
-e Query Error log
-F Flash printer LEDs for 5 seconds
-i Query printer firmware information
-k num Specify standby delay (5-240 minutes)
-l filename Query Current tone curve from RAM [1]
-L filename Store Current tone curve in RAM [1]
-m Query media information
-q filename Dump eeprom data [4]
-Q filename Dump image correction data [4]
-r Reset User tone curve to default [3]
-R Reset printer to factory defaults
-s Query printer status
-X id Cancel print job 'id' [2]
Notes:
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 2047
(ie only 11 bits used)
[2] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
[3] Default printer tone curve is a linear 'val << 3'
[4] This is used as an input to the image processing code, and is
only useful for debugging purposes.
***************************************************************************
BACKEND=shinkos6245
Low-level documentation was provided by Sinfonia, Inc. Thank you!
Model IDs recognized:
sinfonia-chcs6245 hiti-p910l shinko-chcs6245
Model IDs for backwards compatibility with older releases:
shinkos6245 hitip910
Work-in-process printers:
HiTi P910L
Shinko CHC-S6245 (aka "Sinfonia CE1")
Unsupported printers (Unknown VID/PID):
Kodak 8810
Valid commands:
-c filename Query User tone curve from flash [1]
-C filename Store User tone curve in flash [1]
-e Query Error log
-F Flash printer LEDs for 5 seconds
-i Query printer firmware information
-k num Specify standby delay (5-240 minutes)
-l filename Query Current tone curve from RAM [1]
-L filename Store Current tone curve in RAM [1]
-m Query media information
-r Reset User tone curve to default [3]
-R Reset printer to factory defaults
-s Query printer status
-X id Cancel print job 'id' [2]
Notes:
* Work-in-progress, has not been tested on an actual printer yet.
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 2047
(ie only 11 bits used)
[2] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
[3] Default printer tone curve is a linear 'val << 3'
***************************************************************************
BACKEND=sonyupd
Additional model IDs recognized:
sony-updr150 sony-updr200 sony-upcr10l
sony-upd895 sony-upd897 dnp-sl10
Model IDs for backwards compatibility with older releases:
sonyupdr150 sonyupdr200 sonyupcr10
Verified supported printers:
Sony UP-CR10L
Sony UP-D895
Sony UP-D897
Sony UP-DR150
Sony UP-DR200
Unverified/untested, but should work:
DNP DS-SL10
Valid commands:
-s Query printer status
Notes:
* All models can report media empty, but not quantity remaining or type.
***************************************************************************
BACKEND=sonyupdneo
Model IDs recognized:
sony-upcr20l sony-upd898 sony-updr80 dnp-sl20
Work-in-progress printers (Lack USB PIDs)
Sony UP-D898 / UP-X898
Sony UP-CR20L
Sony UP-DR80MD
DNP DS-SL20
Notes:
* Work-in-progress, has not been tested on an actual printer yet.
* We do not know how to query media info or status at this time.
***************************************************************************
BACKEND=mitsu70x
Model IDs recognized:
mitsubishi-d70dw mitsubishi-d80dw mitsubishi-k60dw
fujifilm-ask-300 mitsubishi-d707dw mitsubishi-k60dws
Model IDs for backwards compatibility with older releases:
kodak-305 mitsud80 mitsuk60 kodak305 fujiask300
Supported and tested printers:
Fujifilm ASK-300
Kodak 305
Mitsubishi CP-D70DW
Mitsubishi CP-D707DW
Mitsubishi CP-D80DW
Mitsubishi CP-K60DW-S
Unsupported printers (Unknown VID/PID):
Mitsubishi CP-D70DW-S
Mitsubishi CP-D707DW-S
Mitsubishi CP-D80DW-S
Development was sponsored in part by:
Schreiber & Freunde GmbH & Co. KG
A generous benefactor who wishes to remain anonymous
*** VERY IMPORTANT ***
In order to generate usable output, this family of printers require
the input data to be transformed using specific image processing
algorithms.
The library that implements this processing is dynamically loaded
at runtime. There is currently only one option:
* libMitsuD70ImageReProcess -- GPL'd re-implementation of the
Mitsubishi algorithms, available as source. No guaranteees are
made about its output quality as compared to Mitsubishi's
proprietary drivers, but it is generally considered quite good.
DISCLAIMER: Mitsubishi was not involved in the creation of
libMitsuD70ImageReProcess and is not responsible in any way for
any deficiencies in its output. They will provide no support if
it is used.
Do *NOT* contact Mitsubishi for support if you are using
any combination of gutenprint, selphy_print or libMitsuD70ImageReProcess.
(Please see the full disclaimer in libMitsuD70ImageReProcess.c)
Valid commands:
-j Query Job status
-k num Specify standby delay (1-60 minutes, 0 disables)
-s Query printer status
-w Wake up printer
-W Wake up printer (and wait)
-x num Set USB iSerialNumber reporting (1 yes, 0 no) [1]
-X id Cancel print job 'id' [2]
[1] Printer will need to be power-cycled for this to take effect.
[2] Job ID is the Internal Job ID (reported via job status query)
***************************************************************************
BACKEND=mitsud90
Model IDs recognized:
mitsubishi-d90dw
Supported and tested printers:
Mitsubishi CP-D90DW
Unsupported printers (Unknown VID/PID):
Mitsubishi CP-D90DW-P
Please note: The CP-D90DW printer does not export a serial number
by default. This means that only one of these can be plugged into
the same system. If you wish to use more than one of these
simultaneously, you must enable the 'iSerial' mode by using the '-x'
command as described below.
Valid commands:
-i Query printer information
-j jobid Query job status [1]
-k num Specify standby delay (1-255 minutes, 0 disables)
-m Query printer media
-s Query printer status
-x num Set USB iSerialNumber reporting (1 yes, 0 no) [2]
[1] Job ID is the Internal Job ID (reported via job status query)
[2] Printer will need to be power-cycled for this to take effect.
***************************************************************************
BACKEND=mitsu9xxx
Model IDs recognized:
mitsubishi-9000dw mitsubishi-9500dw mitsubishi-9550dw mitsubishi-9550dw-s
mitsubishi-9600dw mitsubishi-9800dw mitsubishi-9800dw-s mitsubishi-9810dw
mitsubishi-9550d mitsubishi-9550dz mitsubishi-9800d mitsubishi-9800dz
mitsubishi-9810d
Model IDs for backwards compatibility with older releases:
mitsu9000 mitsu9500 mitsu9550 mitsu9600 mitsu9800 mitsu9810
Supported and tested printers:
Mitsubishi CP-9550D/DW and CP-9550DZ/DZS/DW-S
Mitsubishi CP-9600D/DW
Mitsubishi CP-9800DZ/DZS/DW-S [1]
Unverified/untested, but should work: (let us know, please!)
Mitsubishi CP-9800D/DW [1]
Mitsubishi CP-9810D/DW [1]
Mitsubishi CP-9820DW-S [1]
Work-in-progress printers:
Mitsubishi CP-9000D/DW
Mitsubishi CP-9500D/DW
Unsupported (unknown VID/PID):
Mitsubishi CP-9600DW-S/DZ/DZ-S
Valid commands:
-s Query printer status
-m Query printer media
-X Cancel current job
Notes:
[1] **** VERY IMPORTANT ****
The CP-98xx family is similar to the CP-D70 family in that it requires
the input data to be gamma corrected (and likely transformed in other
ways) before it is sent to the printer.
Unlike the D70 family, the data tables used are embedded into the driver
instead of being bundled separately, further complicating the process
of figuring out how everything works. Some progress has been made,
allowing for proper gamma correction/linearization to at least generate
usable prints, although the quality is not considered up to par.
***************************************************************************
BACKEND=mitsup9x
Model IDs recognized:
mitsubishi-p95d mitsubishi-p93d
Model IDs for backwards compatibility with older releases:
mitsup95d mitsup93d
Development was sponsored by:
A benefactor who wishes to remain anonymous
Verified supported printers:
Mitsubishi P95DW
Mitsubishi P93DW
Valid commands:
-s Query printer status
Notes:
* All models can report media empty, but not quantity remaining or type.
***************************************************************************
BACKEND=dnp_citizen
Model IDs recognized:
dnp-ds40 dnp-ds80 dnp-ds80dx dnp-ds620 dnp-ds820 dnp-dsrx1 dnp-ds620
citizen-cw-01 citizen-cw-02 citizen-cx-02 citizen-cx citizen-cx-w citizen-cy
citizen-cy-02 citizen-op900 citizen-op900ii
Model IDs for backwards compatibility with older releases:
dnpds40 dnpds90 dnpds80dx dnpds620 dnpds820 dnpdsrx1
citizencw01 citizencw02 citizencx02
Verified supported printers:
DNP DS40 (aka Citizen CX)
DNP DS80 (aka Citizen CX-W)
DNP DS620 / DS620A
DNP DS820 / DS820A
DNP DS-RX1 / DNP DS-RX1HS (aka Citizen CY and CY-02)
Theoretically supported printers: (Untested)
Citizen CW-01 / OP900
Citizen CW-02 / OP900II
Citizen CX-02
DNP DS80DX
Mitsubishi CP-3800DW
Work-in-progress printers: (USB PIDs unknown)
Olmec OP900
ICI Imagedata OP900
Development was sponsored in part by:
Marco Di Antonio
LiveLink Technology [ www.livelinktechnology.net ]
A generous benefactor who wishes to remain anonymous
This backend supports additional commands:
-i Query printer information (resolution, etc)
-I Query printer sensor information
-n Query printer counters
-N [ A | B | M ] Reset Counter A/B/M [2]
-p num Set 'P' counter to 'num' [2]
-s Query printer status
-k num Specify standby delay (1-99 minutes, 0 disables) [1]
-K num Keep Media Status Across Power Cycles (1 yes, 0 no) [1]
-x num Set USB iSerialNumber reporting (1 yes, 0 no) [3]
-X Cancel current job
-R Reset printer to defaults
Notes:
[1] Only supported by DS620 and DS820
[2] Certain printer features may require updating the printer firmware
[3] Only supported by RX1HS, DS620, and DS820
***************************************************************************
BACKEND=magicard
Model IDs recognized:
magicard-tango-2e magicard-enduro magicard-enduroplus magicard-rio-2e
Model IDs for backwards compatibility with older releases:
tango2e enduro enduroplus
Verified supported printers:
Tango 2E
Work-in-progress printers:
Rio 2E
Tango +L
Enduro
Enduro+
(And all others)
This backend supports additional commands:
magicard [command [arg] ]
Valid commands:
-s Query printer status
-q Generate printer information dump
-I Query printer sensors
-T Print self-test card
-E Eject card in printer
-R Reset printer
Notes:
* All models can report media empty, but not quantity remaining or type.
***************************************************************************