***************************************************************************
Unified Gutenprint/CUPS backend for various Dye-Sublimation photo printers
Copyright (c) 2007-2015 Solomon Peachy <pizza@shaftnet.org>
This free software comes with ABSOLUTELY NO WARRANTY!
Licensed under the GNU GPL, see the 'COPYING' file for more details.
The latest version can be found at
http://git.shaftnet.org/cgit/selphy_print.git
For a list of known bugs and development plans, see:
http://bugs.shaftnet.org/index.php?project=4
***************************************************************************
If you do not have one of the printers listed below, this backend is
not relevant for you and you can just ignore all of this.
Supported Printers:
Canon SELPHY ES series
Canon SELPHY CP series (except CP820, CP910, CP1000, CP1200)
Kodak Professional 1400
Kodak 305 Photo Printer
Kodak 605 Photo Printer
Kodak 805 Photo Printer
Kodak 6800 Photo Printer
Kodak 6850 Photo Printer
Shinko CHC-S2145 (aka Sinfonia S2)
Sony UP-DR150
Sony UP-DR200
DNP DS40 / Citizen CX
DNP DS80 / Citizen CX-W
DNP DS-RX1 / DS-RX1HS / Citizen CY
DNP DS620
Citizen CW-01
Mitsubishi CP-9550D/DW/DW-S/DZ/DZ-S
Mitsubishi CP-3800DW
Shinko CHC-S6145 (aka Sinfonia CS2)
Ciaat Brava 21
Work-in-progress Printers:
DNP DS80DX
Mitsubishi CP-D70DW, CP-D707DW, CP-K60DW-S, and CP-D80DW
Mitsubishi CP-9000DW, CP-9500DW, and CP-9600DW/DW-S
Mitsubishi CP-9800DW, CP-9800DW-S, CP-9810DW, and CP-9820DW-S
Fujifilm ASK-300
Citizen CW-02 and CX2
Olmec OP900 and OP900II
ICI Imagedata OP900
Sony UP-CR10L (aka DNP DS-SL10)
Shinko CHC-S1245 (aka Sinfonia E1)
Shinko CHC-S6245 (aka Sinfonia CE1)
HiTi P910L
Shinko CHC-S6145-5A (aka Sinfonia CS2-c)
Kodak 8810
Kodak 7000, 7010, and 7015
***************************************************************************
This intelligent backend is needed to utilize many common dye-sublimation
photo printers under Linux, OSX, and other UNIX-like operating systems.
Although these printers advertise themselves as standard USB Printer Class
devices, they do not actually obey those specifications and require
special two-way handshaking in order to successfully print.
This backend can only be used in conjunction with Gutenprint 5.2.10 or
newer. Please see the Gutenprint README file (section II D) for more
information on use of this backend and integration into CUPS.
Although this backend is bundled with Gutenprint, this repository is
considered the canonical upstream source where all development occurs.
As such, when compared to the current Gutenprint release, the code found
here is often newer, with additional features or device support. At the
same time, it may have half-developed features that don't quite work,
with giant bugs that come out at midnight to eat your cat.
On that note, please keep in mind that this software distributed
in the hope that it will be useful, but WITHOUT ANY WARRANTY WHATSOEVER.
***************************************************************************
This backend also supports a "standalone" mode that performs various
utility functions for selected printers, such as querying status and
configuring various parameters. The exact commands supported for each
printer are documented below.
***************************************************************************
Compilation:
This tool requires libusb 1.0 to build. We highly recommend
v1.0.16 or newer due to general stability improvements. Versions
older than 1.0.10 will require -DLIBUSB_PRE_1_0_10 to be defined
(see the Makefile).
To further complicate things, libusb-1.0 had a temporary fork called
libusbx, but that was merged back into libusb as of v1.0.18.
Consequently, your distribution package for libusb-1.0 may be
called libusbx instead.
Fedora/RedHat:
yum install libusbx-devel libusb1-devel
Debian/Ubuntu
apt-get install libusbx-dev libusb-1.0-0-dev
And all you need to do after that is type 'make'
***************************************************************************
CUPS backend usage:
DEVICE_URI=someuri \
gutenprint52+usb job-id user title num-copies options [ filename ]
The backend generates output for CUPS to parse, including logging
print counts, and if the printer supports it, reporting media type and
remaining media counts.
***************************************************************************
Standalone usage:
This backend is set up as a multi-call executable; that is to say
behaivor changes based on the name used to invoke the executable.
When compiled, a set of symlinks are created, corresponding to each
of the internal backends. Alternatively you may set the BACKEND
environment variable to force a specific backend to be used. These
commands are equivalent:
BACKEND=backend gutenprint52+usb [ arguments ]
backend [ arguments ]
All backends support the following invocations:
backend [ arguments ]
backend [ arguments ] filename
backend [ arguments ] - < filename
somecommand | backend [ arguments ] -
The 'filename' here refers to the raw spool data generated by
Gutenprint (eg via its gimp plugin) or the Windows print-to-file
output.
All global arguments:
-D Increment debug level [1]
-G Display GPL text
-f Enable fast return mode if possible [2]
-d numcopies Print 'numcopies' of the supplied job
[1] This argument can be repeated to increase the debug level.
Alternatively, the 'DYESUB_DEBUG' environment variable can be
used. For example, '-DDD' and 'DYESUB_DEBUG=3' are equivalent.
DYESUB_DEBUG=1 Enable debug output
DYESUB_DEBUG=2 Dump contents of short messges
DYESUB_DEBUG=3 Dump contents of all messages
[2] This terminates the backend as soon as the printer has
acknowledged the print job, without waiting for the print job
to complete. This can also be enabled by setting the
'FAST_RETURN' environment variable. This is the default behavior
when using this backend with CUPS. Not all backends support
fast return.
If you have multiple models of the same printer family connected
simultaneously, the backend will choose the first one it finds.
If you wish to target a specific device, you may specify its
serial number using the 'SERIAL' environment variable. For example:
SERIAL=N782 backend filename [ arguments ]
All backends support an additional operational mode, to test out
unknown models. To use this mode, specify the VID, PID and its
internal device type as environment variables:
EXTRA_VID=04a9 EXTRA_PID=3ab1 EXTRA_TYPE=7 backend filename
The VID and PID are specified in hexidecimal, and the TYPE is
the P_XXX enumeration defined in backend_common.h. The '7' in this
example corresponds to most Canon SELPHY CP models, and is what you
would use if you were trying to get the backend to detect an
otherwise unrecognized SELPHY CP model.
If you are able to successfuly print using this technique,
please let us know so we can add the apppriate entry to the
internal database.
Finally, some backends support additional arguments; see below:
***************************************************************************
BACKEND=canonselphy
Verified supported printers:
ES1, ES2, ES3, ES30, ES40, CP-10, CP-100, CP-200, CP-300, CP-330,
CP400, CP500, CP510, CP710, CP720, CP730, CP740, CP750, CP760, CP770,
CP780, CP790, CP800, CP900
Unverified/untested, but should work: (let us know, please!)
ES20, CP-220, CP520, CP530, CP600, CP810
NOT supported: (Printer does not need any special backend)
CP820, CP910, CP1000, CP1200
This backend does not support additional commands.
***************************************************************************
BACKEND=kodak1400
Verified supported printers:
Kodak 1400
Kodak 805
Valid commands:
-C filename Set tone curve [1]
Notes:
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and ???
(unsure as to the bit usage)
***************************************************************************
BACKEND=kodak6800
Verified supported printers:
Kodak 6800
Kodak 6850
Development was sponsored by:
LiveLink Technology [ www.livelinktechnology.net ]
Valid commands:
-c filename Query tone curve [1]
-C filename Set tone curve [1]
-m Query supported media
-s Query printer status
-R Reset printer to factory defaults
-X id Cancel print job 'id' [2]
Notes:
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 16383
(ie 14-bit)
[2] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
***************************************************************************
BACKEND=kodak605
Verified supported printers:
Kodak 605
Unsupported printers (Unknown VID/PID):
Kodak 7000/7010/7015
Valid commands:
-C filename Set tone curve [1]
-m Query supported media
-s Query printer status
Notes:
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and ???
(unsure as to the bit usage)
***************************************************************************
BACKEND=shinkos2145
Verified supported printers:
Shinko CHC-S2145 (aka "Sinfonia S2")
Development was initially sponsored by:
LiveLink Technology [ www.livelinktechnology.net ]
In order to use this backend, you will need to ensure the printer is
configured to use the 'DRV' (as opposed to 'DLL') operating mode. See
the printer documentation for details on how to set this.
Valid commands:
-b [ 0 | 1 ] Disable or Enable the printer control panel.
-c filename Query User tone curve from flash [1]
-C filename Store User tone curve in flash [1]
-e Query Error log
-F Flash printer LEDs for 5 seconds
-i Query printer firmware information
-l filename Query Current tone curve from RAM [1]
-L filename Store Current tone curve in RAM [1]
-m Query media information
-r Reset User tone curve to default [4]
-R Reset printer to factory defaults
-s Query printer status
-u Query user string
-U somestring Set user string to 'somestring'
-X id Cancel print job 'id' [3]
Notes:
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 2047
(ie only 11 bits used)
[3] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
[4] Default printer tone curve is a linear 'val << 3'
***************************************************************************
BACKEND=shinkos1245
Low-level documentation was provided by Sinfonia, Inc. Thank you!
Work-in-process printers:
Shinko CHC-S1245 (aka "Sinfonia E1")
Valid commands:
-s Query printer status
-m Query media information
-u Query user string
-U somestring Set user string to 'somestring'
-X id Cancel print job 'id' [1]
-R Reset printer to factory defaults
-F Tone curve commands affect FINE table
-c filename Query User tone curve from flash [2]
-C filename Store User tone curve in flash [2]
-l filename Query Current tone curve from RAM [2]
-L filename Store Current tone curve in RAM [2]
[1] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
[2] Format of tone curve file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 16383
(ie only 14 bits used)
***************************************************************************
BACKEND=shinkos6145
Low-level documentation was provided by Sinfonia and CIAAT.
Thank you!
Verified supported printers:
Shinko CHC-S6145 (aka "Sinfonia CS2")
Ciaat Brava 21
*** VERY IMPORTANT ***
In order to generate usable output, the Sinfonia CHC-S6145 printer
(and its siblings) require the input data to be transformed using
specific image processing algorithms.
The library that implements this processing is dynamically loaded
at runtime. There are three options:
* libS6145ImageProcess -- Supported by Sinfonia, this is a proprietary
library only available for x86 and x86_64 linux targets. It can be
obtained by politely contacting your local Sinfonia distributor.
If you have the appropriate permission fron Sinfonia and its
technical and legal limitations are acceptible to you, we recommend
you use the supported libS6145ImageProcess library, as it will
generate the highest quality output.
* libS6145ImageReProcess -- GPL'd re-implementation of the Sinfonia
algorithms, available as source. It is a drop-in replacement
that appears to generate identical output to the proprietary
Sinfonia library.
DISCLAIMER: Sinfonia Inc was not involved in the creation of
libS6145ImageReProcess and is not responsible in any way for any
deficiencies in its output. They will provide no support if it is
used.
Do *NOT* contact Sinfonia for support if you are using
libS6146ImageReProcess.
(Please see the full disclaimer in libS6145ImageReProcess.c)
* If neither of the above libraries are found, the backend will
fall back to a very crude algorithm that generates low-quality
results not suitable for photographic output
As selphy_print is released under the terms of the GPL, it cannot
normally be combined with proprietary libraries.
Therefore, the authors of selphy_print grant its users an additional
permission (under section 7 of the GPLv3) to combine and/or redistribute
it with the libS6145ImageProcess library. For the full text of this
license exception, please see the header of backend_shinkos6145.c
Valid commands:
-c filename Query User tone curve from flash [1]
-C filename Store User tone curve in flash [1]
-e Query Error log
-F Flash printer LEDs for 5 seconds
-i Query printer firmware information
-k num Specify standby delay (5-240 minutes)
-l filename Query Current tone curve from RAM [1]
-L filename Store Current tone curve in RAM [1]
-m Query media information
-q filename Dump eeprom data
-Q filename Dump image correction data [4]
-r Reset User tone curve to default [3]
-R Reset printer to factory defaults
-s Query printer status
-X id Cancel print job 'id' [2]
Notes:
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 2047
(ie only 11 bits used)
[2] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
[3] Default printer tone curve is a linear 'val << 3'
[4] This is used as an input to the image processing code, and is
only useful for debugging purposes.
***************************************************************************
BACKEND=shinkos6245
Low-level documentation was provided by Sinfonia, Inc. Thank you!
Work-in-process printers:
Shinko CHC-S6245 (aka "Sinfonia CE1")
HiTi P910L
Unsupported printers (Unknown VID/PID):
Kodak 8810
Valid commands:
-c filename Query User tone curve from flash [1]
-C filename Store User tone curve in flash [1]
-e Query Error log
-F Flash printer LEDs for 5 seconds
-i Query printer firmware information
-k num Specify standby delay (5-240 minutes)
-l filename Query Current tone curve from RAM [1]
-L filename Store Current tone curve in RAM [1]
-m Query media information
-r Reset User tone curve to default [3]
-R Reset printer to factory defaults
-s Query printer status
-X id Cancel print job 'id' [2]
Notes:
[1] Format of curvedata file:
256 entries each of Yellow, Magenta, Cyan mappings:
Values are unsigned 16-bit big endian, between 0 and 2047
(ie only 11 bits used)
[2] Job ID is the Internal Job ID (reported via status)
This cancels a multi-copy print job.
To see which jobs are active/pending, see the output of the
'-s' command, specifically the 'Bank' output.
[3] Default printer tone curve is a linear 'val << 3'
***************************************************************************
BACKEND=sonyupdr150
Verified supported printers:
Sony UP-DR150
Sony UP-DR200
Unverified/untested, but should work:
Sony UP-CR10L
DNP DS-SL10
This backend does not support additional commands.
***************************************************************************
BACKEND=mitsu70x
Supported and tested printers:
Kodak 305
Untested but believed to work:
Mitsubishi CP-D70DW
Mitsubishi CP-D707DW
Mitsubishi CP-K60DW-S
Unsupported printers (Unknown VID/PID):
Mitsubishi CP-D80DW
Fujifilm ASK-300
*** VERY IMPORTANT ***
In order to generate usable output, this family of printers require
the input data to be transformed using specific image processing
algorithms.
The library that implements this processing is dynamically loaded
at runtime. There is currently only one option:
* libMitsuD70ImageReProcess -- GPL'd re-implementation of the
Mitsubishi algorithms, available as source. No guaranteees are
made about its output quality as compared to Mitsubishi's
proprietary drivers, but it is generally considered quite good.
DISCLAIMER: Mitsubishi was not involved in the creation of
libMitsuD70ImageReProcess and is not responsible in any way for
any deficiencies in its output. They will provide no support if
it is used.
Do *NOT* contact Mitsubishi for support if you are using
any combination of gutenprint, selphy_print or
libMitsuD80ImageReProcess.
(Please see the full disclaimer in libMitsuD70ImageReProcess.c)
* If the above library is not found, the backend will fall back to
a very crude algorithm that generates low-quality results not
suitable for photographic output.
Valid commands:
-k num Specify standby delay (1-60 minutes, 0 disables)
-s Query printer status (Only partially decoded)
-X id Cancel print job 'id' [1]
[1] Job ID is the Internal Job ID (reported via status)
To see which jobs are active/pending, see the output of the
'-s' command.
***************************************************************************
BACKEND=mitsu9550
Supported and tested printers:
Mitsubishi CP-9550D/DW and CP-9550DZ/DZS/DW-S
Mitsubishi CP-9800DZ/DZS/DW-S [1]
Work-in-progress printers:
Mitsubishi CP-9000D/DW
Mitsubishi CP-9500D/DW
Mitsubishi CP-9600D/DW
Unsupported (unknown VID/PID):
Mitsubishi CP-9600DW-S/DZ/DZ-S
Mitsubishi CP-9800D/DW [1]
Mitsubishi CP-9810D/DW [1]
Mitsubishi CP-9820DW-S [1]
Valid commands:
-s Query printer status
-m Query printer media
Notes:
**** VERY IMPORTANT ****
The CP-98xx family is similar to the CP-D70 family in that it requires
the input data to be gamma corrected (and likely transformed in other
ways) before it is sent to the printer. Currently, Gutenprint performs
a relatively crude linear conversion that results in poor quality output.
Unlike the D70 family, the data tables used are embedded into the driver
instead of being bundled separately, further complicating the process
of figuring out how this all works.
***************************************************************************
BACKEND=dnpds40
Verified supported printers:
DNP DS40 / Citizen CX
DNP DS80 / Citizen CX-W
DNP DS-RX1 / DNP DS-RX1HS / Citizen CY
DNP DS620
Theoretically supported printers: (Untested)
Mitsubishi CP-3800DW
Citizen CW-02/OP900II
DNP DS80DX
Work-in-progress printers: (USB PIDs unknown)
Citizen CX2 (?)
Development was initially sponsored by:
Marco Di Antonio
LiveLink Technology [ www.livelinktechnology.net ]
This backend supports additional commands:
dnpds40 [command [arg] ]
Valid commands:
-i Query printer information (resolution, etc)
-I Query printer sensor information
-n Query printer counters
-N [ A | B | M ] Reset Counter A/B/M [2]
-p num Set 'P' counter to 'num' [2]
-s Query printer status
-k num Specify standby delay (1-99 minutes, 0 disables) [1]
-K num Keep Media Status Across Power Cycles (1 yes, 0 no) [1]
-x num Set USB iSerialNumber reporting (1 yes, 0 no) [3]
-X Cancel current job
-R Reset printer to defaults
Notes:
[1] Only supported by DS620
[2] Certain printer features may require updating the printer firmware
[3] Only supported by DS620 and RX1HS
***************************************************************************
BACKEND=citizencw01
Verified supported printers:
Citizen CW-01
Work-in-progress printers: (USB PIDs unknown)
Olmec OP900
ICI Imagedata OP900
This backend supports additional commands:
cw01 [command [arg] ]
Valid commands:
-i Query printer information (resolution, etc)
-n Query printer counters
-s Query printer status
-N [ A | B ] Reset Counter A/B
***************************************************************************