selphy_print/backend_hiti.c
Solomon Peachy f9cbd6ee74 README updates:
* Consistent naming for supported/unsupported lists
 * Move Mitsu CP30 to supported list
 * Naming fixes for Mitsu CP30 / CP9xxx / CP3800 series
 * Remove HiTi P110 from list entirely
 * Don't query Manuf/Model strings for old URI scemes
2021-04-28 23:11:45 -04:00

2484 lines
64 KiB
C

/*
* HiTi Photo Printer CUPS backend -- libusb-1.0 version
*
* (c) 2019-2021 Solomon Peachy <pizza@shaftnet.org>
*
* The latest version of this program can be found at:
*
* https://git.shaftnet.org/cgit/selphy_print.git
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 3 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <https://www.gnu.org/licenses/>.
*
* SPDX-License-Identifier: GPL-3.0+
*
*/
#define BACKEND hiti_backend
#include "backend_common.h"
/* For Integration into gutenprint */
#if defined(HAVE_CONFIG_H)
#include <config.h>
#endif
// We should use nanosleep everywhere properly.
#define __usleep(__x) { struct timespec t = { 0, (__x) * 1000 } ; nanosleep (&t, NULL); }
/* Private structures */
struct hiti_cmd {
uint8_t hdr; /* 0xa5 */
uint16_t len; /* (BE) everything after this field, minimum 3, max 6 */
uint8_t status; /* see CMD_STATUS_* */
uint16_t cmd; /* CMD_* (BE) */
uint8_t payload[]; /* 0-3 items */
} __attribute__((packed));
#define CMD_STATUS_OK 0x50
#define CMD_STATUS_OK2 0x51 /* Seen with ERDC_RLC on p51x */
#define CMD_STATUS_OK3 0x53 /* Seen with EPC_SP on p51x, sometimes? */
#define CMD_STATUS_BAD_CMD 0xd8 /* Seen with EFM_RD on p51x */
#define CMD_STATUS_UNK2 0xdb /* Seen with ESD_SEHT2 on p51x */
/* Request Device Characteristics */
#define CMD_RDC_RS 0x0100 /* Request Summary */
#define CMD_RDC_ROC 0x0104 /* Request Option Characteristics XX (1 resp) */
/* Printer Configuratio Control */
#define CMD_PCC_RP 0x0301 /* Reset Printer (1 arg) */
#define CMD_PCC_STP 0x030F /* Set Target Printer (1 arg) XX -- master or slave perhaps? */
/* Request Device Status */
#define CMD_RDS_RSS 0x0400 /* Request Status Summary */
#define CMD_RDS_RIS 0x0401 /* Request Input Status */
#define CMD_RDS_RIA 0x0403 /* Request Input Alert */
#define CMD_RDS_RJA 0x0405 /* Request Jam Alert */
#define CMD_RDS_ROIRA 0x0406 /* Request Operator Intervention Alert */
#define CMD_RDS_RW 0x0407 /* Request Warnings */
#define CMD_RDS_DSRA 0x0408 /* Request Device Serviced Alerts */
#define CMD_RDS_SA 0x040A /* Request Service Alerts */
#define CMD_RDS_RPS 0x040B /* Request Printer Statistics (*/
#define CMD_RDS_RSUS 0x040C /* Request Supplies Status */
/* Job Control */
#define CMD_JC_SJ 0x0500 /* Start Job (3 arg) */
#define CMD_JC_EJ 0x0501 /* End Job (3 arg) */
#define CMD_JC_QJC 0x0502 /* Query Job Completed (5 arg) XX */
#define CMD_JC_QQA 0x0503 /* Query Jobs Queued or Active (3 arg) */
#define CMD_JC_RSJ 0x0510 /* Resume Suspended Job (3 arg) XX */
/* Extended Read Device Characteristics */
#define CMD_ERDC_RS 0x8000 /* Request Summary */
#define CMD_ERDC_RCC 0x8001 /* Read Calibration Charcteristics */
#define CMD_ERDC_RPC 0x8005 /* Request Print Count (1 arg, 8 (51x) or 4 (52x,7xx) resp) */
#define CMD_ERDC_RLC 0x8006 /* Request LED calibration */
#define CMD_ERDC_RSN 0x8007 /* Read Serial Number (1 arg) */
#define CMD_ERDC_C_RPCS 0x8008 /* CS Request Printer Correction Status */
#define CMD_ERDC_RPIDM 0x8009 /* Request PID and Model Code */
#define CMD_ERDC_RTLV 0x800E /* Request T/L Voltage */
#define CMD_ERDC_RRVC 0x800F /* Read Ribbon Vendor Code */
#define CMD_ERDC_UNK 0x8010 /* Unknown Query RE */
#define CMD_ERDC_RHA 0x801C /* Read Highlight Adjustment (6 resp) RE */
// 8008 seen in Windows Comm @ 3211 (0 len response)
// 8011 seen in Windows Comm @ 3369 (1 arg req (always 00), 4 len response)
/* Extended Format Data */
#define CMD_EFD_SF 0x8100 /* Sublimation Format */
#define CMD_EFD_CHS 0x8101 /* Color & Heating Setting (2 arg) */
#define CMD_EFD_C_CHS 0x8102 /* CS Color Heating Setting (3 arg) */
#define CMD_EFD_C_SIID 0x8103 /* CS Set Input ID (1 arg) */
/* Extended Page Control */
#define CMD_EPC_SP 0x8200 /* Start Page */
#define CMD_EPC_EP 0x8201 /* End Page */
#define CMD_EPC_SYP 0x8202 /* Start Yellow Plane */
#define CMD_EPC_SMP 0x8204 /* Start Magenta Plane */
#define CMD_EPC_SCP 0x8206 /* Start Cyan Plane */
#define CMD_EPC_C_SYP 0x8202 /* CS Start Yellow Page */
#define CMD_EPC_C_SMP 0x8203 /* CS Start Magenta Page */
#define CMD_EPC_C_SCP 0x8204 /* CS Start Cyan Page */
#define CMD_EPC_C_SBP 0x8205 /* CS Start Black Page */
#define CMD_EPC_C_SKP 0x8206 /* CS Start K Resin Page */
#define CMD_EPC_C_SLP 0x8207 /* CS Start Lamination Page */
#define CMD_EPC_C_SOP 0x8208 /* CS Start Overcoat Page */
#define CMD_EPC_C_SY2P 0x8209 /* CS Start Yellow2 Page */
#define CMD_EPC_C_SM2P 0x820A /* CS Start Magenta2 Page */
#define CMD_EPC_C_SC2P 0x820B /* CS Start Cyan2 Page */
#define CMD_EPC_C_SB2P 0x820C /* CS Start Black2 Page */
#define CMD_EPC_C_SK2P 0x820D /* CS Start K Resin2 Page */
#define CMD_EPC_C_SL2P 0x820E /* CS Start Lamination2 Page */
#define CMD_EPC_C_SO2P 0x820F /* CS Start Overcoat2 Page */
/* Extended Send Data */
#define CMD_ESD_SEHT2 0x8303 /* Send Ext Heating Table (2 arg) */
#define CMD_ESD_SEHT 0x8304 /* Send Ext Heating Table XX */
#define CMD_ESD_SEPD 0x8309 /* Send Ext Print Data (2 arg) + struct */
#define CMD_ESD_SHPTC 0x830B /* Send Heating Parameters & Tone Curve XX (n arg) */
#define CMD_ESD_C_SHPTC 0x830C /* CS Send Heating Parameters & Tone Curve XX (n arg) */
/* Extended Flash/NVram */
#define CMD_EFM_RNV 0x8405 /* Read NVRam (1 arg) XX */
#define CMD_EFM_RD 0x8408 /* Read single location (2 arg) -- XXX RE not P51x */
#define CMD_EFM_SHA 0x840E /* Set Highlight Adjustment (5 arg) -- XXX RE */
/* Extended Security Control */
#define CMD_ESC_SP 0x8900 /* Set Password */
#define CMD_ESC_SSM 0x8901 /* Set Security Mode */
/* Extended Debug Mode */
#define CMD_EDM_CVD 0xE002 /* Common Voltage Drop Values (n arg) */
#define CMD_EDM_CPP 0xE023 /* Clean Paper Path (1 arg) XX */
#define CMD_EDM_C_MC2CES 0xE02E /* CS Move card to Contact Encoder Station */
#define CMD_EDM_C_MC2MES 0xE02F /* CS Move card to Mag Encoder Station */
#define CMD_EDM_C_MC2CLES 0xE030 /* CS Move card to ContactLess Encoder Station */
#define CMD_EDM_C_MC2EB 0xE031 /* CS Move card to Eject Box */
#define CMD_EDM_C_MC2H 0xE037 /* CS Move card to Hopper */
/* CMD_PCC_RP */
#define RESET_PRINTER 0x01
#define RESET_SOFT 0x02
/* 801C --> 0 args
<-- 6 bytes: 00 YY MM CC 00 00 (YMC is +- 31d)
040E --> 5 args: YY MM CC 00 00 (YMC is +- 31d)
<-- 1 arg: 00 (success, presumably)
Highlight Correction. Unclear if it's used by printer or by "driver"
*/
/* CMD_ERDC_RCC */
struct hiti_calibration {
uint8_t horiz;
uint8_t vert;
} __attribute__((packed));
/* CMD_ERDC_RPIDM */
struct hiti_rpidm {
uint16_t usb_pid; /* BE */
uint8_t region; /* See hiti_regions */
} __attribute__((packed));
/* CMD_EDRC_RS */
struct hiti_erdc_rs { /* All are BIG endian */
uint8_t unk; // 1e == 30, but struct is 29 length.
uint16_t stride; /* fixed at 0x0780/1920? Head width? */
uint16_t dpi_cols; /* fixed at 300 */
uint16_t dpi_rows; /* fixed at 300 */
uint16_t cols; /* 1844 for 6" media */
uint16_t rows; /* 1240 for 6x4" media */
uint8_t unk2[18]; // ff ff 4b 4b 4b 4b af 3c 4f 7b 19 08 5c 0a b4 64 af af
} __attribute__((packed));
/* CMD_JC_* */
struct hiti_job {
uint8_t lun; /* Logical Unit Number. Leave at 0 */
uint16_t jobid; /* BE */
} __attribute__((packed));
/* CMD_JC_QQA */
#define MAX_JOBS 4
struct hiti_job_qqa {
uint8_t count; /* 0-MAX_JOBS */
struct {
struct hiti_job job;
uint8_t status;
} row[MAX_JOBS]; /* Four jobs max outstanding */
} __attribute__((packed));
#define QQA_STATUS_PRINTING 0x00
#define QQA_STATUS_WAITING 0x01
#define QQA_STATUS_SUSPENDED 0x03
/* CMD_JC_QJC */
struct hiti_jc_qjc {
uint8_t lun; /* Logical Unit Number. Leave at 0 */
uint16_t jobid; /* BE */
uint16_t jobid2; /* BE, set to 1? */
} __attribute__((packed));
// repsonse is 6 bytes.
//. 5x3.5 1547 1072
//. 6x4 1844 1240
//. 6x9 1844 2740
//. 6x8/2 1844 2492
//. 6x8 1844 2434
//. 5x7 1548 2140
//. 5x7/2 1548 2152
//. 6x4/2 1844 1248
// 6x6 1844 1844
// 5x5 1540 1540 ? (1548?)
// 6x5 1844 1544
// 6x2 1844 ????
#define PRINT_TYPE_6x4 0
#define PRINT_TYPE_5x7 2
#define PRINT_TYPE_6x8 3
#define PRINT_TYPE_6x9 6
#define PRINT_TYPE_6x9_2UP 7
#define PRINT_TYPE_5x3_5 8
#define PRINT_TYPE_6x4_2UP 9
#define PRINT_TYPE_6x2 10
#define PRINT_TYPE_5x7_2UP 11
struct hiti_heattable {
uint8_t y[2050];
uint8_t pad0[30];
uint8_t m[2050];
uint8_t pad1[30];
uint8_t c[2050];
uint8_t pad2[30];
uint8_t o[2050]; /* Overcoat Glossy */
uint8_t pad3[30];
uint8_t om[2050]; /* Overcoat Matte */
uint8_t pad4[30];
uint8_t cvd[582];
uint8_t pad5[26];
} __attribute__((packed));
STATIC_ASSERT(sizeof(struct hiti_heattable) == 11008);
/* All fields are LE */
struct hiti_gpjobhdr {
uint32_t cookie; /* "GPHT" */
uint32_t hdr_len; /* Including the whole thing */
uint32_t model; /* Model family, in decimal */
uint32_t cols;
uint32_t rows;
uint32_t col_dpi;
uint32_t row_dpi;
uint32_t copies;
uint32_t quality; /* 0 for std, 1 for fine */
uint32_t code; /* PRINT_TYPE_* */
uint32_t overcoat; /* 1 for matte, 0 for glossy */
uint32_t payload_flag; /* See PAYLOAD_FLAG_* */
uint32_t payload_len;
} __attribute__((packed));
#define PAYLOAD_FLAG_YMCPLANAR 0x01
#define PAYLOAD_FLAG_NOCORRECT 0x02
#define HDR_COOKIE 0x54485047
/* CMD_EFD_SF for non-CS systems */
struct hiti_efd_sf {
/*@0 */ uint8_t mediaType; /* PRINT_TYPE_?? */
/*@1 */ uint16_t cols_res; /* BE, always 300dpi */
/*@3 */ uint16_t rows_res; /* BE, always 300dpi */
/*@5 */ uint16_t cols; /* BE */
/*@7 */ uint16_t rows; /* BE */
/*@9 */ int8_t rows_offset; /* Has to do with H_Offset calibration */
/*@10*/ int8_t cols_offset; /* Has to do wiwth V_Offset calibration */
/*@11*/ uint8_t colorSeq; /* always 0x87, but |= 0xc0 for matte. */
/*@12*/ uint8_t copies;
/*@13*/ uint8_t printMode; /* 0x08 baseline, |= 0x02 fine mode */
} __attribute__((packed));
/* CMD_ESD_SEPD -- Note it's different from the usual command flow */
struct hiti_extprintdata {
uint8_t hdr; /* 0xa5 */
uint16_t len; /* 24bit data length (+8) in BE format, first two bytes */
uint8_t status; /* 0x50 */
uint16_t cmd; /* 0x8309, BE */
uint8_t lenb; /* LSB of length */
uint16_t startLine; /* Starting line number, BE */
uint16_t numLines; /* Number of lines in block, BE, 3000 max. */
uint8_t payload[]; /* ie data length bytes */
} __attribute__((packed));
/* CMD_ESD_SEHT2 -- Note it's different from the usual command flow */
struct hiti_seht2 {
uint8_t hdr; /* 0xa5 */
uint16_t len; /* 24-bit data length (+5) in BE format, first two bytes */
uint8_t status; /* 0x50 */
uint16_t cmd; /* 0x8303, BE */
uint8_t lenb; /* LSB of length */
uint8_t plane;
} __attribute__((packed));
/* All multi-byte fields here are LE */
struct hiti_matrix {
/*@00*/ uint8_t row0[16]; // all 00
/*@10*/ uint8_t row1[6]; // 01 00 00 00 00 00
uint16_t cuttercount;
uint8_t align_v;
uint8_t aligh_h;
uint8_t row1_2[6]; // all 00
/*@20*/ uint8_t row2[16]; // no idea
/*@30*/ uint8_t error_index0; /* Value % 31 == NEWEST. Count back */
uint8_t errorcode[31];
/*@50*/ uint8_t row5[16]; // all 00, except [8] which is a5.
/*@60*/ char serno[16]; /* device serial number */
/*@70*/ uint16_t unclean_prints;
uint16_t cleanat[15]; // XX Guess?
/*@90*/ uint16_t supply_motor;
uint16_t take_motor;
uint8_t row9[12]; // all 00 except last, which is 0xa5
/*@a0*/ uint16_t errorcount[31];
uint8_t unk_rowd[2]; // seems to be 00 cc ?
/*@e0*/ uint16_t tpc_4x6;
uint16_t tpc_5x7;
uint16_t tpc_6x8;
uint16_t tpc_6x9;
uint8_t unk_rowe[8]; // all 00
/*@f0*/ uint16_t apc_4x6;
uint16_t apc_5x7;
uint16_t apc_6x8;
uint16_t apc_6x9;
uint8_t unk_rowf[4]; // all 00
uint8_t tphv_a;
uint8_t tphv_d;
uint8_t unk_rowf2[2]; // all 00
/* @100 */
} __attribute__((packed));
/* Private data structure */
struct hiti_printjob {
size_t jobsize;
int copies;
uint8_t *databuf;
uint32_t datalen;
struct hiti_gpjobhdr hdr;
int blocks;
};
struct hiti_ctx {
struct dyesub_connection *conn;
int jobid;
char serno[32];
int erdc_rpc_len;
struct marker marker;
char version[256];
char id[256];
uint8_t matrix[256]; // XXX convert to struct matrix */
uint8_t supplies[5]; /* Ribbon */ // XXX convert to struct
uint8_t supplies2[4]; /* Paper */ // XXX convert to struct
struct hiti_calibration calibration;
uint8_t led_calibration[10]; // XXX convert to struct
uint8_t unk_8010[15]; // XXX
struct hiti_erdc_rs erdc_rs;
uint8_t hilight_adj[6]; // XXX convert to struct, not P51x!
uint8_t rtlv[2]; /* XXX figure out conversion/math? */
struct hiti_rpidm rpidm;
uint16_t ribbonvendor; // low byte = media subtype, high byte = type.
uint32_t media_remain; // XXX could be array?
};
/* Prototypes */
static int hiti_doreset(struct hiti_ctx *ctx, uint8_t type);
static int hiti_query_job_qa(struct hiti_ctx *ctx, struct hiti_job *jobid, struct hiti_job_qqa *resp);
static int hiti_query_status(struct hiti_ctx *ctx, uint8_t *sts, uint32_t *err);
static int hiti_query_version(struct hiti_ctx *ctx);
static int hiti_query_matrix(struct hiti_ctx *ctx);
static int hiti_query_supplies(struct hiti_ctx *ctx);
static int hiti_query_tphv(struct hiti_ctx *ctx);
static int hiti_query_statistics(struct hiti_ctx *ctx);
static int hiti_query_calibration(struct hiti_ctx *ctx);
static int hiti_query_led_calibration(struct hiti_ctx *ctx);
static int hiti_query_ribbonvendor(struct hiti_ctx *ctx);
static int hiti_query_summary(struct hiti_ctx *ctx, struct hiti_erdc_rs *rds);
static int hiti_query_rpidm(struct hiti_ctx *ctx);
static int hiti_query_hilightadj(struct hiti_ctx *ctx);
static int hiti_query_unk8010(struct hiti_ctx *ctx);
static int hiti_query_counter(struct hiti_ctx *ctx, uint8_t arg, uint32_t *resp, int num);
static int hiti_query_markers(void *vctx, struct marker **markers, int *count);
static int hiti_query_serno(struct dyesub_connection *conn, char *buf, int buf_len);
static int hiti_docmd(struct hiti_ctx *ctx, uint16_t cmdid, uint8_t *buf, uint16_t buf_len, uint16_t *rsplen)
{
uint8_t cmdbuf[2048];
struct hiti_cmd *cmd = (struct hiti_cmd *)cmdbuf;
int ret, num = 0;
cmd->hdr = 0xa5;
cmd->len = cpu_to_be16(buf_len + 3);
cmd->status = CMD_STATUS_OK;
cmd->cmd = cpu_to_be16(cmdid);
if (buf && buf_len)
memcpy(cmd->payload, buf, buf_len);
/* Send over command */
if ((ret = send_data(ctx->conn, (uint8_t*) cmd, buf_len + 3 + 3))) {
return ret;
}
__usleep(10*1000);
/* Read back command */
ret = read_data(ctx->conn, cmdbuf, 6, &num);
if (ret)
return ret;
if (num != 6) {
ERROR("CMD Readback length mismatch (%d vs %d)!\n", num, 6);
return CUPS_BACKEND_FAILED;
}
/* Compensate for hdr len */
num = be16_to_cpu(cmd->len) - 3;
if (num > *rsplen) {
ERROR("Response too long for buffer (%d vs %d)!\n", num, *rsplen);
*rsplen = 0;
return CUPS_BACKEND_FAILED;
}
/* Check response */
if (cmd->status != CMD_STATUS_OK && cmd->status != CMD_STATUS_OK2 &&
cmd->status != CMD_STATUS_OK3) {
ERROR("Command %04x failed, code %02x\n", cmdid, cmd->status);
return CUPS_BACKEND_FAILED;
}
*rsplen = num;
return CUPS_BACKEND_OK;
}
static int hiti_docmd_resp(struct hiti_ctx *ctx, uint16_t cmdid,
uint8_t *buf, uint8_t buf_len,
uint8_t *respbuf, uint16_t *resplen)
{
int ret, num = 0;
uint16_t cmd_resp_len = *resplen;
ret = hiti_docmd(ctx, cmdid, buf, buf_len, &cmd_resp_len);
if (ret)
return ret;
if (cmd_resp_len > *resplen) {
ERROR("Response too long! (%d vs %d)\n", cmd_resp_len, *resplen);
*resplen = 0;
return CUPS_BACKEND_FAILED;
}
__usleep(10*1000);
/* Read back the data*/
ret = read_data(ctx->conn, respbuf, *resplen, &num);
if (ret)
return ret;
/* Sanity check */
if (num > *resplen) {
ERROR("Response too long for buffer (%d vs %d)!\n", num, *resplen);
*resplen = 0;
return CUPS_BACKEND_FAILED;
}
*resplen = num;
return CUPS_BACKEND_OK;
}
static int hiti_sepd(struct hiti_ctx *ctx, uint32_t buf_len,
uint16_t startLine, uint16_t numLines)
{
uint8_t cmdbuf[sizeof(struct hiti_extprintdata)];
struct hiti_extprintdata *cmd = (struct hiti_extprintdata *)cmdbuf;
int ret, num = 0;
buf_len += 8;
cmd->hdr = 0xa5;
cmd->len = cpu_to_be16(buf_len >> 8);
cmd->status = CMD_STATUS_OK;
cmd->cmd = cpu_to_be16(CMD_ESD_SEPD);
cmd->lenb = buf_len & 0xff;
cmd->startLine = cpu_to_be16(startLine);
cmd->numLines = cpu_to_be16(numLines);
/* Send over command */
if ((ret = send_data(ctx->conn, (uint8_t*) cmd, sizeof(*cmd)))) {
return ret;
}
__usleep(10*1000);
/* Read back command */
ret = read_data(ctx->conn, cmdbuf, 6, &num);
if (ret)
return ret;
if (num != 6) {
ERROR("CMD Readback length mismatch (%d vs %d)!\n", num, 6);
return CUPS_BACKEND_FAILED;
}
return CUPS_BACKEND_OK;
}
#define STATUS_IDLE 0x00
#define STATUS0_POWERON 0x01
#define STATUS0_RESEND_DATA 0x04
#define STATUS0_BUSY 0x80
#define STATUS1_SUPPLIES 0x01
#define STATUS1_PAPERJAM 0x02
#define STATUS1_INPUT 0x08
#define STATUS2_WARNING 0x02
#define STATUS2_DEVSERVICE 0x04
#define STATUS2_OPERATOR 0x08
static const char *hiti_status(uint8_t *sts)
{
if (sts[2] & STATUS2_WARNING)
return "Warning";
else if (sts[2] & STATUS2_DEVSERVICE)
return "Service Required";
else if (sts[2] & STATUS2_OPERATOR)
return "Operator Intervention Required";
else if (sts[1] & STATUS1_PAPERJAM)
return "Paper Jam";
else if (sts[1] & STATUS1_INPUT)
return "Input Alert";
else if (sts[1] & STATUS1_SUPPLIES)
return "Supply Alert";
else if (sts[0] & STATUS0_RESEND_DATA)
return "Resend Data";
else if (sts[0] & STATUS0_BUSY)
return "Busy";
else if (sts[0] & STATUS0_POWERON)
return "Powering On";
else if (sts[0] == STATUS_IDLE)
return "Accepting Jobs";
else
return "Unknown";
}
static const char *hiti_jobstatuses(uint8_t code)
{
switch (code) {
case QQA_STATUS_PRINTING: return "Printing";
case QQA_STATUS_WAITING: return "Waiting";
case QQA_STATUS_SUSPENDED: return "Suspended";
default: return "Unknown";
}
}
#define RIBBON_TYPE_4x6 0x01
#define RIBBON_TYPE_5x7 0x02
#define RIBBON_TYPE_6x9 0x03
#define RIBBON_TYPE_6x8 0x04
static const char* hiti_ribbontypes(uint8_t code)
{
switch (code) {
case RIBBON_TYPE_4x6: return "4x6";
case RIBBON_TYPE_5x7: return "5x7";
case RIBBON_TYPE_6x9: return "6x9";
case RIBBON_TYPE_6x8: return "6x8";
default: return "Unknown";
}
}
static unsigned int hiti_ribboncounts(uint8_t code)
{
switch(code) {
case RIBBON_TYPE_4x6: return 500;
case RIBBON_TYPE_5x7: return 290;
case RIBBON_TYPE_6x8: return 250;
case RIBBON_TYPE_6x9: return 220; // XXX guess
default: return 999;
}
}
#define PAPER_TYPE_5INCH 0x02
#define PAPER_TYPE_6INCH 0x01
#define PAPER_TYPE_NONE 0x00
static const char* hiti_papers(uint8_t code)
{
switch (code) {
case PAPER_TYPE_NONE : return "None";
case PAPER_TYPE_5INCH: return "5 inch";
case PAPER_TYPE_6INCH: return "6 inch";
default: return "Unknown";
}
}
static const char* hiti_regions(uint8_t code)
{
switch (code) {
case 0x11: return "GB";
case 0x12:
case 0x22: return "CN";
case 0x13: return "NA";
case 0x14: return "SA";
case 0x15: return "EU";
case 0x16: return "IN";
case 0x17: return "DB";
case 0xf0: // Seen on P510S
case 0x01: // Seen on P520L
default:
return "Unknown";
}
}
/* Supposedly correct for P720, P728, and P520 */
static const char *hiti_errors(uint32_t code)
{
switch(code) {
case 0x00000000: return "None";
/* Warning Alerts */
case 0x000100FE: return "Paper roll mismatch";
case 0x000300FE: return "Buffer underrun when printing";
case 0x000301FE: return "Command sequence error";
case 0x000302FE: return "NAND flash unformatted";
case 0x000303FE: return "NAND flash space insufficient";
case 0x000304FE: return "Heating parameter table incompatible";
case 0x000502FE: return "Dust box needs cleaning";
/* Device Service Required Alerts */
case 0x00030001: return "SRAM error";
case 0x00030101: return "Cutter error";
case 0x00030201: return "ADC error";
case 0x00030301: return "NVRAM R/W error";
case 0x00030302: return "SDRAM checksum error";
case 0x00030402: return "DSP code checksum error";
case 0x00030501: return "Cam TPH error";
case 0x00030502: return "NVRAM checksom error";
case 0x00030601: return "Cam pinch error";
case 0x00030602: return "SRAM checksum error";
case 0x00030701: return "Firmware write error";
case 0x00030702: return "Flash checksum error";
case 0x00030802: return "Wrong firmware checksum error";
case 0x00030901: return "ADC error in slave printer";
case 0x00030A01: return "Cam Platen error in slave printer";
case 0x00030B01: return "NVRAM R/W error in slave printer";
case 0x00030C02: return "NVRAM CRC error in slave printer";
case 0x00030D02: return "SDRAM checksum error in slave printer";
case 0x00030E02: return "SRAM checksum error in slave printer";
case 0x00030F02: return "FLASH checksum error in slave printer";
case 0x00031002: return "Wrong firmware checksum error in slave printer";
case 0x00031101: return "Communication error with slave printer";
case 0x00031201: return "NAND flash error";
case 0x00031302: return "Cutter error";
/* Operator Intervention Required Alerts */
case 0x00050001: return "Cover open";
case 0x00050101: return "Cover open";
/* Supplies Alerts */
case 0x00080004: return "Ribbon missing";
case 0x00080007: return "Ribbon newly inserted";
case 0x00080103: return "Ribbon exhausted";
case 0x00080104: return "Ribbon exhausted";
case 0x00080105: return "Ribbon malfunction";
case 0x00080204: return "Ribbon missing in slave printer";
case 0x00080207: return "Ribbon newly inserted in slave printer";
case 0x000802FE: return "Ribbon IC error";
case 0x00080303: return "Ribbon exhausted in slave printer";
case 0x000803FE: return "Ribbon not authenticated";
case 0x000804FE: return "Ribbon IC read/write error";
case 0x000805FE: return "Ribbon IC read/write error in slave printer";
case 0x000806FE: return "Unsupported ribbon";
case 0x000807FE: return "Unsupported ribbon in slave printer";
case 0x000808FE: return "Unknown ribbon";
case 0x000809FE: return "Unknown ribbon in slave printer";
/* Jam Alerts */
case 0x00030000: return "Paper jam";
case 0x0003000F: return "Paper jam";
case 0x00030200: return "Paper jam in paper path 01";
case 0x00030300: return "Paper jam in paper path 02";
case 0x00030400: return "Paper jam in paper path 03";
case 0x00030500: return "Paper jam in paper path 04";
case 0x00030600: return "Paper jam in paper path 05";
case 0x00030700: return "Paper jam in paper path 06";
case 0x00030800: return "Paper jam in paper path 07";
case 0x00030900: return "Paper jam in paper path 08";
case 0x00030A00: return "Paper jam in paper path 09";
/* Input Alerts */
case 0x00000008: return "Paper box missing";
case 0x00000100: return "Cover open";
case 0x00000101: return "Cover open failure";
case 0x00000200: return "Ribbon IC missing";
case 0x00000201: return "Ribbon missing";
case 0x00000202: return "Ribbon mismatch 01";
case 0x00000203: return "Security check fail";
case 0x00000204: return "Ribbon mismatch 02";
case 0x00000205: return "Ribbon mismatch 03";
case 0x00000300: return "Ribbon exhausted 01";
case 0x00000301: return "Ribbon exhausted 02";
case 0x00000302: return "Printing failure (jam?)";
case 0x00000400: return "Paper exhausted 01";
case 0x00000401: return "Paper exhausted 02";
case 0x00000402: return "Paper not ready";
case 0x00000500: return "Paper jam 01";
case 0x00000501: return "Paper jam 02";
case 0x00000502: return "Paper jam 03";
case 0x00000503: return "Paper jam 04";
case 0x00000504: return "Paper jam 05";
case 0x00000600: return "Paper mismatch";
case 0x00000700: return "Cam error 01";
case 0x00000800: return "Cam error 02";
case 0x00000900: return "NVRAM error";
case 0x00001000: return "IC error";
case 0x00001200: return "ADC error";
case 0x00001300: return "FW Check Error";
case 0x00001500: return "Cutter error";
#if 0 // XXX these seem inappropriate
case 0x00007538: return "Device attached to printer";
case 0x00007539: return "Printer is in mobile mode";
case 0x00007540: return "Printer is in standalone mode";
case 0x00007542: return "Firmware too old for Fine mode";
case 0x00007543: return "Firmware too old for 2x6 mode";
case 0x00007544: return "Firmware too old for Matte mode";
case 0x00007545: return "Firmware too old";
case 0x00007546: return "Firmware too old";
#endif
case 0x00008000: return "Paper out or feeding error";
case 0x00008008: return "Paper box missing";
case 0x00008010: return "Paper roll mismatch";
case 0x00080200: return "Ribbon type mismatch";
// case 0x10008000: return "Paper out or paper low"; /* XXX this won't work, high byte is cleared */
default: return "Unknown";
}
}
static int hiti_get_info(struct hiti_ctx *ctx)
{
int ret;
ret = hiti_query_tphv(ctx);
if (ret)
return ret;
ret = hiti_query_led_calibration(ctx);
if (ret)
return ret;
INFO("Printer ID: %s\n", ctx->id);
INFO("Printer Version: %s\n", ctx->version);
INFO("Serial Number: %s\n", ctx->serno);
INFO("Calibration: H: %d V: %d\n", ctx->calibration.horiz, ctx->calibration.vert);
INFO("LED Calibration: %d %d %d / %d %d %d\n",
ctx->led_calibration[4], ctx->led_calibration[5],
ctx->led_calibration[6], ctx->led_calibration[7],
ctx->led_calibration[8], ctx->led_calibration[9]);
INFO("TPH Voltage (T/L): %d %d\n", ctx->rtlv[0], ctx->rtlv[1]);
hiti_query_markers(ctx, NULL, NULL);
INFO("Region: %s (%02x)\n",
hiti_regions(ctx->rpidm.region),
ctx->rpidm.region);
if (ctx->conn->type != P_HITI_51X) {
INFO("Highlight Adjustment (Y M C): %d %d %d\n",
ctx->hilight_adj[1], ctx->hilight_adj[2], ctx->hilight_adj[3]);
}
ret = hiti_query_summary(ctx, &ctx->erdc_rs);
if (ret)
return CUPS_BACKEND_FAILED;
INFO("Status Summary: %d %dx%d %dx%d\n",
ctx->erdc_rs.stride,
ctx->erdc_rs.cols,
ctx->erdc_rs.rows,
ctx->erdc_rs.dpi_cols,
ctx->erdc_rs.dpi_rows);
if (ctx->conn->type != P_HITI_51X) {
ret = hiti_query_matrix(ctx);
if (ret)
return CUPS_BACKEND_FAILED;
}
uint32_t buf[2] = {0,0};
ret = hiti_query_counter(ctx, 1, buf, ctx->erdc_rpc_len);
if (ret)
return CUPS_BACKEND_FAILED;
INFO("Total prints: %u\n", buf[0]);
ret = hiti_query_counter(ctx, 2, buf, ctx->erdc_rpc_len);
if (ret)
return CUPS_BACKEND_FAILED;
INFO("6x4 prints: %u\n", buf[0]);
ret = hiti_query_counter(ctx, 4, buf, ctx->erdc_rpc_len);
if (ret)
return CUPS_BACKEND_FAILED;
INFO("6x8 prints: %u\n", buf[0]);
if (ctx->conn->type != P_HITI_51X) {
int i;
DEBUG("MAT ");
for (i = 0 ; i < 256 ; i++) {
if (i != 0 && (i % 16 == 0)) {
DEBUG2("\n");
DEBUG(" ");
}
DEBUG2("%02x ", ctx->matrix[i]);
}
DEBUG2("\n");
}
// XXX other shit..
return CUPS_BACKEND_OK;
}
/* Use jobid of 0 for "any" */
static int hiti_query_job_qa(struct hiti_ctx *ctx, struct hiti_job *jobid, struct hiti_job_qqa *resp)
{
int ret;
uint16_t len = sizeof(*resp);
resp->count = 0;
ret = hiti_docmd_resp(ctx, CMD_JC_QQA,
(uint8_t*) jobid, sizeof(*jobid),
(uint8_t*) resp, &len);
if (ret)
return ret;
return CUPS_BACKEND_OK;
}
static int hiti_get_status(struct hiti_ctx *ctx)
{
uint8_t sts[3];
uint32_t err = 0;
int ret, i;
struct hiti_job_qqa qqa;
hiti_query_markers(ctx, NULL, NULL);
ret = hiti_query_status(ctx, sts, &err);
if (ret)
return ret;
INFO("Printer Status: %s (%02x %02x %02x)\n",
hiti_status(sts), sts[0], sts[1], sts[2]);
INFO("Printer Error: %s (%08x)\n",
hiti_errors(err), err);
INFO("Media: %s (%02x / %04x) : %03u/%03u\n",
hiti_ribbontypes(ctx->supplies[2]),
ctx->supplies[2],
ctx->ribbonvendor,
ctx->media_remain, hiti_ribboncounts(ctx->supplies[2]));
INFO("Paper: %s (%02x)\n",
hiti_papers(ctx->supplies2[0]),
ctx->supplies2[0]);
/* Find out if we have any jobs outstanding */
struct hiti_job job = { 0 };
hiti_query_job_qa(ctx, &job, &qqa);
for (i = 0 ; i < qqa.count ; i++) {
INFO("JobID %02x %04x (%s)\n",
qqa.row[i].job.lun,
be16_to_cpu(qqa.row[i].job.jobid),
hiti_jobstatuses(qqa.row[i].status));
}
// XXX other shit...?
return CUPS_BACKEND_OK;
}
static void *hiti_init(void)
{
struct hiti_ctx *ctx = malloc(sizeof(struct hiti_ctx));
if (!ctx) {
ERROR("Memory Allocation Failure!\n");
return NULL;
}
memset(ctx, 0, sizeof(struct hiti_ctx));
return ctx;
}
static int hiti_attach(void *vctx, struct dyesub_connection *conn, uint8_t jobid)
{
struct hiti_ctx *ctx = vctx;
int ret;
ctx->conn = conn;
/* Ensure jobid is sane */
ctx->jobid = (jobid & 0x7fff);
if (!ctx->jobid)
ctx->jobid++;
if (ctx->conn->type == P_HITI_51X) {
ctx->erdc_rpc_len = 2;
} else {
ctx->erdc_rpc_len = 1;
}
if (test_mode < TEST_MODE_NOATTACH) {
/* P52x firmware v1.19-v1.21 lose their minds when Linux
issues a routine CLEAR_ENDPOINT_HALT. Printer can recover
if it is reset. Unclear what the side effects are.. */
if (ctx->conn->type == P_HITI_52X)
libusb_reset_device(ctx->conn->dev);
ret = hiti_query_unk8010(ctx);
if (ret)
return ret;
ret = hiti_query_version(ctx);
if (ret)
return ret;
ret = hiti_query_supplies(ctx);
if (ret)
return ret;
ret = hiti_query_calibration(ctx);
if (ret)
return ret;
ret = hiti_query_ribbonvendor(ctx);
if (ret)
return ret;
ret = hiti_query_rpidm(ctx);
if (ret)
return ret;
if (ctx->conn->type != P_HITI_51X) {
ret = hiti_query_hilightadj(ctx);
if (ret)
return ret;
}
ret = hiti_query_serno(ctx->conn, ctx->serno, sizeof(ctx->serno));
if (ret)
return ret;
switch (ctx->conn->type) {
case P_HITI_52X:
if (strncmp(ctx->version, "1.23", 4) < 0)
WARNING("Printer firmware %s out of date (vs %s), please update.\n", ctx->version, "v1.23");
else if (strncmp(ctx->version, "1.22", 4) < 0 &&
strncmp(ctx->version, "1.17", 4) > 0) /* V1.18 -> v1.21 have a known USB CLEAR_ENDPOINT_HALT issue */
WARNING("Printer firmware %s has a known USB bug, please update to at least v1.22\n", ctx->version);
break;
default:
break;
}
// do real stuff
} else {
ctx->supplies2[0] = PAPER_TYPE_6INCH;
ctx->supplies[2] = RIBBON_TYPE_4x6;
if (getenv("MEDIA_CODE")) {
// set fake fw version?
ctx->supplies[2] = atoi(getenv("MEDIA_CODE"));
if (ctx->supplies[2] == RIBBON_TYPE_5x7)
ctx->supplies2[0] = PAPER_TYPE_5INCH;
}
}
ctx->marker.color = "#00FFFF#FF00FF#FFFF00";
ctx->marker.name = hiti_ribbontypes(ctx->supplies[2]);
ctx->marker.numtype = ctx->supplies[2];
ctx->marker.levelmax = hiti_ribboncounts(ctx->supplies[2]);
ctx->marker.levelnow = 0;
return CUPS_BACKEND_OK;
}
static void hiti_cleanup_job(const void *vjob) {
const struct hiti_printjob *job = vjob;
if (job->databuf)
free(job->databuf);
free((void*)job);
}
#define CORRECTION_FILE_SIZE (33*33*33*3 + 2)
static uint8_t *hiti_get_correction_data(struct hiti_ctx *ctx, uint8_t mode)
{
const char *fname = NULL;
uint8_t *buf;
int ret, len;
int mediaver = ctx->ribbonvendor & 0x3f;
int mediatype = ((ctx->ribbonvendor & 0xf000) == 0x1000);
switch (ctx->conn->type)
{
case P_HITI_CS2XX:
fname = "CS2xx_CMPBcd.bin";
break;
case P_HITI_51X:
if (!mediatype) { /* DNP media */
if (mode) {
fname = "P51x_CMQPra.bin";
break;
} else {
fname = "P51x_CMPPra.bin";
break;
}
} else { /* CHC media */
if (mode) {
switch(mediaver) {
case 0:
fname = "P51x_CCQPra.bin";
break;
case 1:
fname = "P51x_CCQP1ra.bin";
break;
case 2:
fname = "P51x_CCQP2ra.bin";
break;
case 3:
default:
fname = "P51x_CCQP3ra.bin";
break;
}
} else {
switch(mediaver) {
case 0:
fname = "P51x_CCPPra.bin";
break;
case 1:
fname = "P51x_CCPP1ra.bin";
break;
case 2:
fname = "P51x_CCPP2ra.bin";
break;
case 3:
default:
fname = "P51x_CCPP3ra.bin";
break;
}
}
}
break;
case P_HITI_52X:
fname = "P52x_CCPPri.bin";
break;
case P_HITI_720:
if (!mediatype) {
if (mode) {
fname = "P72x_CMQPrd.bin";
break;
} else {
fname = "P72x_CMPPrd.bin";
break;
}
} else {
if (mode) {
switch(mediaver) {
case 0:
fname = "P72x_CCQPrd.bin";
break;
case 1:
fname = "P72x_CCQP1rd.bin";
break;
case 2:
fname = "P72x_CCQP2rd.bin";
break;
case 3:
fname = "P72x_CCQP3rd.bin";
break;
case 4:
default:
fname = "P72x_CCQP4rd.bin";
break;
}
} else {
switch(mediaver) {
case 0:
fname = "P72x_CCPPrd.bin";
break;
case 1:
fname = "P72x_CCPP1rd.bin";
break;
case 2:
fname = "P72x_CCPP2rd.bin";
break;
case 3:
fname = "P72x_CCPP3rd.bin";
break;
case 4:
default:
fname = "P72x_CCPP4rd.bin";
break;
}
}
}
break;
case P_HITI_750:
fname = "P75x_CCQPrh.bin";
break;
default:
fname = NULL;
break;
}
if (!fname)
return NULL;
buf = malloc(CORRECTION_FILE_SIZE);
if (!buf) {
WARNING("Memory allocation failure!\n");
return NULL;
}
char full[2048];
snprintf(full, sizeof(full), "%s/%s", corrtable_path, fname);
ret = dyesub_read_file(full, buf, CORRECTION_FILE_SIZE, &len);
if (ret) {
free(buf);
return NULL;
}
if (len != CORRECTION_FILE_SIZE) {
WARNING("Read len mismatch\n");
free(buf);
return NULL;
}
return buf;
}
static int hiti_seht2(struct hiti_ctx *ctx, uint8_t plane,
uint8_t *buf, uint32_t buf_len)
{
uint8_t cmdbuf[sizeof(struct hiti_seht2)];
struct hiti_seht2 *cmd = (struct hiti_seht2 *)cmdbuf;
int ret, num = 0;
buf_len += 5;
cmd->hdr = 0xa5;
cmd->len = cpu_to_be16(buf_len >> 8);
cmd->status = CMD_STATUS_OK;
cmd->cmd = cpu_to_be16(CMD_ESD_SEHT2);
cmd->lenb = buf_len & 0xff;
cmd->plane = plane;
buf_len -= 5;
/* Send over command */
if ((ret = send_data(ctx->conn, (uint8_t*) cmd, sizeof(*cmd)))) {
return ret;
}
__usleep(10*1000);
/* Read back command */
ret = read_data(ctx->conn, cmdbuf, 6, &num);
if (ret)
return ret;
// XXX check resp length?
/* Send payload, if any */
if (buf_len && !ret) {
ret = send_data(ctx->conn, buf, buf_len);
}
return ret;
}
static int hiti_cvd(struct hiti_ctx *ctx, uint8_t *buf, uint32_t buf_len)
{
uint8_t cmdbuf[sizeof(struct hiti_cmd)];
struct hiti_cmd *cmd = (struct hiti_cmd *)cmdbuf;
int ret, num = 0;
cmd->hdr = 0xa5;
cmd->len = cpu_to_be16(buf_len + 3);
cmd->status = CMD_STATUS_OK;
cmd->cmd = cpu_to_be16(CMD_EDM_CVD);
/* Send over command */
if ((ret = send_data(ctx->conn, (uint8_t*) cmd, sizeof(*cmd)))) {
return ret;
}
__usleep(10*1000);
/* Read back command */
ret = read_data(ctx->conn, cmdbuf, 6, &num);
if (ret)
return ret;
// XXX check resp length?
/* Send payload, if any */
if (buf_len && !ret) {
ret = send_data(ctx->conn, buf, buf_len);
}
return ret;
}
static int hiti_send_heat_data(struct hiti_ctx *ctx, uint8_t mode, uint8_t matte)
{
const char *fname = NULL;
struct hiti_heattable table;
int ret, len;
int mediaver = ctx->ribbonvendor & 0x3f;
int mediatype = ((ctx->ribbonvendor & 0xf000) == 0x1000);
// XXX if field_0x70 != 100) send blank/empty tables..
// no idea what sets this field.
switch (ctx->conn->type)
{
case P_HITI_51X:
if (!mediatype) { /* DNP media */
if (mode) {
fname = "P51x_heatqhra.bin";
break;
} else {
fname = "P51x_heatthra.bin";
break;
}
} else { /* CHC media */
if (mode) {
switch(mediaver) {
case 0:
fname = "P51x_hea0qcra.bin";
break;
case 1:
fname = "P51x_hea1qcra.bin";
break;
case 2:
fname = "P51x_hea2qcra.bin";
break;
case 3:
default:
fname = "P51x_hea3qcra.bin";
break;
}
} else {
switch(mediaver) {
case 0:
fname = "P51x_hea0tcra.bin";
break;
case 1:
fname = "P51x_hea1tcra.bin";
break;
case 2:
fname = "P51x_hea2tcra.bin";
break;
case 3:
default:
fname = "P51x_hea3tcra.bin";
break;
}
}
}
break;
case P_HITI_52X:
case P_HITI_720:
default:
fname = NULL;
break;
}
if (fname) {
char full[2048];
snprintf(full, sizeof(full), "%s/%s", corrtable_path, fname);
ret = dyesub_read_file(full, (uint8_t*) &table, sizeof(struct hiti_heattable), &len);
if (ret) {
return ret;
}
if (len != sizeof(struct hiti_heattable)) {
ERROR("Heattable len mismatch (%d)\n", len);
return CUPS_BACKEND_FAILED;
}
} else {
memset(&table, 0, sizeof(table));
}
/* Send over the heat tables */
ret = hiti_seht2(ctx, 0, table.y, sizeof(table.y));
if (!ret)
ret = hiti_seht2(ctx, 1, table.m, sizeof(table.m));
if (!ret)
ret = hiti_seht2(ctx, 2, table.c, sizeof(table.c));
if (!ret) {
if (matte)
ret = hiti_seht2(ctx, 3, table.om, sizeof(table.om));
else
ret = hiti_seht2(ctx, 3, table.o, sizeof(table.o));
}
/* And finally, send over the CVD data */
if (!ret)
ret = hiti_cvd(ctx, table.cvd, sizeof(table.cvd));
return ret;
}
/* HiTi's funky interpolation table processing
Note this is a standard "CUBE" LUT (33x33x33) so there are options
for making this faster!
*/
struct rgb {
uint8_t r;
uint8_t g;
uint8_t b;
};
static uint32_t interp1089[33];
static uint32_t interp33[33];
static uint16_t interp256[256*9];
static void hiti_interp_init(void)
{
int i;
uint16_t *pre, *cur;
for (i = 0 ; i < 33 ; i++) {
interp1089[i] = i * 1089;
interp33[i] = i * 33;
}
memset(interp256, 0, sizeof(interp256));
pre = &interp256[0];
cur = &interp256[256];
for (i = 1 ; i < 9 ; i++) {
int j;
for (j = 0 ; j < 256 ; j++) {
cur[j] = pre[j] + j;
};
pre += 256;
cur += 256;
}
}
/* src and dst are RGB tuples */
static void hiti_interp33_256(uint8_t *dst, uint8_t *src, const uint8_t *pTable)
{
struct rgb p1_pos, p2_pos, p3_pos, p4_pos;
struct rgb p1_val, p2_val, p3_val, p4_val;
uint8_t r_weight, g_weight, b_weight;
uint16_t w1, w2, w3, w4;
uint16_t *pw1, *pw2, *pw3, *pw4;
uint32_t pos;
/* Get Grid position */
p1_pos.r = src[0] >> 3;
p1_pos.g = src[1] >> 3;
p1_pos.b = src[2] >> 3;
p4_pos.r = p1_pos.r + 1;
p4_pos.g = p1_pos.g + 1;
p4_pos.b = p1_pos.b + 1;
/* Weights */
if (src[0] == 255)
r_weight = 8;
else
r_weight = src[0] & 0x7;
if (src[1] == 255)
g_weight = 8;
else
g_weight = src[1] & 0x7;
if (src[2] == 255)
b_weight = 8;
else
b_weight = src[2] & 0x7;
/* Work out relative weights and offsets */
if (r_weight >= g_weight) {
if (g_weight >= b_weight) { /* R > G > B */
w1 = 8 - r_weight;
w2 = r_weight - g_weight;
w3 = g_weight - b_weight;
w4 = b_weight;
p2_pos.r = p1_pos.r + 1;
p2_pos.g = p1_pos.g;
p2_pos.b = p1_pos.b;
p3_pos.r = p1_pos.r + 1;
p3_pos.g = p1_pos.g + 1;
p3_pos.b = p1_pos.b;
} else {
if (r_weight >= b_weight) { /* R > B > G */
w1 = 8 - r_weight;
w2 = r_weight - b_weight;
w3 = b_weight - g_weight;
w4 = g_weight;
p2_pos.r = p1_pos.r + 1;
p2_pos.g = p1_pos.g;
p2_pos.b = p1_pos.b;
p3_pos.r = p1_pos.r + 1;
p3_pos.g = p1_pos.g;
p3_pos.b = p1_pos.b + 1;
} else { /* B > R > G */
w1 = 8 - b_weight;
w2 = b_weight - r_weight;
w3 = r_weight - g_weight;
w4 = g_weight;
p2_pos.r = p1_pos.r;
p2_pos.g = p1_pos.g;
p2_pos.b = p1_pos.b + 1;
p3_pos.r = p1_pos.r + 1;
p3_pos.g = p1_pos.g;
p3_pos.b = p1_pos.b + 1;
}
}
} else {
if (r_weight >= b_weight) { /* G > R > B */
w1 = 8 - g_weight;
w2 = g_weight - r_weight;
w3 = r_weight - b_weight;
w4 = b_weight;
p2_pos.r = p1_pos.r;
p2_pos.g = p1_pos.g + 1;
p2_pos.b = p1_pos.b;
p3_pos.r = p1_pos.r + 1;
p3_pos.g = p1_pos.g + 1;
p3_pos.b = p1_pos.b;
} else {
if (g_weight >= b_weight) { /* G > B > R */
w1 = 8 - g_weight;
w2 = g_weight - b_weight;
w3 = b_weight - r_weight;
w4 = r_weight;
p2_pos.r = p1_pos.r;
p2_pos.g = p1_pos.g + 1;
p2_pos.b = p1_pos.b;
p3_pos.r = p1_pos.r;
p3_pos.g = p1_pos.g + 1;
p3_pos.b = p1_pos.b + 1;
} else { /* B > G > R */
w1 = 8 - b_weight;
w2 = b_weight - g_weight;
w3 = g_weight - r_weight;
w4 = r_weight;
p2_pos.r = p1_pos.r;
p2_pos.g = p1_pos.g;
p2_pos.b = p1_pos.b + 1;
p3_pos.r = p1_pos.r;
p3_pos.g = p1_pos.g + 1;
p3_pos.b = p1_pos.b + 1;
}
}
}
/* Work out values */
pos = (interp1089[p1_pos.b] + interp33[p1_pos.g] + p1_pos.r) * 3;
p1_val.r = pTable[pos];
p1_val.g = pTable[pos + 1];
p1_val.b = pTable[pos + 2];
pos = (interp1089[p2_pos.b] + interp33[p2_pos.g] + p2_pos.r) * 3;
p2_val.r = pTable[pos];
p2_val.g = pTable[pos + 1];
p2_val.b = pTable[pos + 2];
pos = (interp1089[p3_pos.b] + interp33[p3_pos.g] + p3_pos.r) * 3;
p3_val.r = pTable[pos];
p3_val.g = pTable[pos + 1];
p3_val.b = pTable[pos + 2];
pos = (interp1089[p4_pos.b] + interp33[p4_pos.g] + p4_pos.r) * 3;
p4_val.r = pTable[pos];
p4_val.g = pTable[pos + 1];
p4_val.b = pTable[pos + 2];
/* Final offsets into interpolation table */
pw1 = &interp256[w1 << 8];
pw2 = &interp256[w2 << 8];
pw3 = &interp256[w3 << 8];
pw4 = &interp256[w4 << 8];
/* And at long last.. final values */
dst[0] = (pw1[p1_val.r] + pw2[p2_val.r] + pw3[p3_val.r] + pw4[p4_val.r]) >> 3;
dst[1] = (pw1[p1_val.g] + pw2[p2_val.g] + pw3[p3_val.g] + pw4[p4_val.g]) >> 3;
dst[2] = (pw1[p1_val.b] + pw2[p2_val.b] + pw3[p3_val.b] + pw4[p4_val.b]) >> 3;
}
static int hiti_read_parse(void *vctx, const void **vjob, int data_fd, int copies)
{
struct hiti_ctx *ctx = vctx;
struct hiti_printjob *job = NULL;
int ret;
if (!ctx)
return CUPS_BACKEND_FAILED;
job = malloc(sizeof(*job));
if (!job) {
ERROR("Memory allocation failure!\n");
return CUPS_BACKEND_RETRY_CURRENT;
}
memset(job, 0, sizeof(*job));
job->copies = copies;
/* Read in header */
ret = read(data_fd, &job->hdr, sizeof(job->hdr));
if (ret < 0 || ret != sizeof(job->hdr)) {
hiti_cleanup_job(job);
if (ret == 0)
return CUPS_BACKEND_CANCEL;
ERROR("Read failed (%d/%d)\n",
ret, (int)sizeof(job->hdr));
perror("ERROR: Read failed");
return ret;
}
/* Byteswap everything */
{
uint32_t *ptr = (uint32_t*) &job->hdr;
int i;
for (i = 0 ; i < (int)(sizeof(job->hdr) / sizeof(uint32_t)) ; i++)
ptr[i] = le32_to_cpu(ptr[i]);
}
/* Sanity check header */
if (job->hdr.hdr_len != sizeof(job->hdr)) {
ERROR("Header length mismatch (%u/%d)!\n", job->hdr.hdr_len, (int)sizeof(job->hdr));
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
if (job->hdr.cookie != HDR_COOKIE) {
ERROR("Unrecognized header!\n");
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
/* Use whicever copy count is larger */
if (job->copies < (int)job->hdr.copies)
job->copies = job->hdr.copies;
/* Sanity check printer type vs job type */
switch(ctx->conn->type)
{
case P_HITI_51X:
if (job->hdr.model != 510) {
ERROR("Unrecognized header!\n");
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
break;
case P_HITI_52X:
if (job->hdr.model != 520) {
ERROR("Unrecognized header!\n");
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
break;
case P_HITI_720:
case P_HITI_750:
if (job->hdr.model != 720) {
ERROR("Unrecognized header!\n");
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
break;
default:
break;
}
/* Allocate a buffer */
job->datalen = 0;
job->databuf = malloc(job->hdr.payload_len);
if (!job->databuf) {
ERROR("Memory allocation failure!\n");
hiti_cleanup_job(job);
return CUPS_BACKEND_RETRY_CURRENT;
}
/* Read in data */
uint32_t remain = job->hdr.payload_len;
while (remain) {
ret = read(data_fd, job->databuf + job->datalen, remain);
if (ret < 0) {
ERROR("Read failed (%d/%u/%u)\n",
ret, remain, job->datalen);
perror("ERROR: Read failed");
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
job->datalen += ret;
remain -= ret;
}
/* Sanity check against paper */
switch (ctx->supplies2[0]) {
case PAPER_TYPE_5INCH:
if (job->hdr.cols != 1548) {
ERROR("Illegal job on 5-inch paper!\n");
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
break;
case PAPER_TYPE_6INCH:
if (job->hdr.cols != 1844) {
ERROR("Illegal job on 6-inch paper!\n");
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
break;
default:
ERROR("Unknown paper type (%d)!\n", ctx->supplies2[0]);
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
/* Sanity check against ribbon type */
switch (ctx->supplies[2]) {
case RIBBON_TYPE_4x6:
if (job->hdr.code != PRINT_TYPE_6x4 &&
job->hdr.code != PRINT_TYPE_6x4_2UP &&
job->hdr.code != PRINT_TYPE_6x2) {
ERROR("Invalid ribbon type vs job (%02x/%02x)\n",
ctx->supplies[2], job->hdr.code);
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
break;
case RIBBON_TYPE_5x7:
if (job->hdr.code != PRINT_TYPE_5x7 &&
job->hdr.code != PRINT_TYPE_5x3_5 &&
job->hdr.code != PRINT_TYPE_5x7_2UP) {
ERROR("Invalid ribbon type vs job (%02x/%02x)\n",
ctx->supplies[2], job->hdr.code);
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
break;
case RIBBON_TYPE_6x8:
if (job->hdr.code != PRINT_TYPE_6x4 &&
job->hdr.code != PRINT_TYPE_6x4_2UP &&
job->hdr.code != PRINT_TYPE_6x8 &&
job->hdr.code != PRINT_TYPE_6x2) {
ERROR("Invalid ribbon type vs job (%02x/%02x)\n",
ctx->supplies[2], job->hdr.code);
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
break;
case RIBBON_TYPE_6x9:
if (job->hdr.code != PRINT_TYPE_6x4 &&
job->hdr.code != PRINT_TYPE_6x4_2UP &&
job->hdr.code != PRINT_TYPE_6x8 &&
job->hdr.code != PRINT_TYPE_6x2 &&
job->hdr.code != PRINT_TYPE_6x9 &&
job->hdr.code != PRINT_TYPE_6x9_2UP) {
ERROR("Invalid ribbon type vs job (%02x/%02x)\n",
ctx->supplies[2], job->hdr.code);
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
break;
default:
ERROR("Unknown ribbon type!\n");
hiti_cleanup_job(job);
return CUPS_BACKEND_CANCEL;
}
/* Convert input packed BGR data into YMC planar, if needed */
if (!(job->hdr.payload_flag & PAYLOAD_FLAG_YMCPLANAR)) {
/* Load up correction data, if requested */
uint8_t *corrdata = NULL;
if (!(job->hdr.payload_flag & PAYLOAD_FLAG_NOCORRECT))
corrdata = hiti_get_correction_data(ctx, job->hdr.quality);
if (corrdata) {
INFO("Running input data through correction tables\n");
hiti_interp_init();
}
int stride = ((job->hdr.cols * 4) + 3) / 4;
uint8_t *ymcbuf = malloc(job->hdr.rows * stride * 3);
uint32_t i, j;
if (!ymcbuf) {
hiti_cleanup_job(job);
ERROR("Memory Allocation Failure!\n");
return CUPS_BACKEND_FAILED;
}
for (i = 0 ; i < job->hdr.rows ; i++) {
uint8_t *rowY = ymcbuf + stride * i;
uint8_t *rowM = ymcbuf + stride * (job->hdr.rows + i);
uint8_t *rowC = ymcbuf + stride * (job->hdr.rows * 2 + i);
/* Simple optimization */
uint8_t oldrgb[3] = { 255, 255, 255 };
uint8_t destrgb[3];
if (corrdata) {
hiti_interp33_256(oldrgb, destrgb, corrdata);
}
for (j = 0 ; j < job->hdr.cols ; j++) {
uint8_t rgb[3];
uint32_t base = (job->hdr.cols * i + j) * 3;
/* Input data is BGR */
rgb[2] = job->databuf[base];
rgb[1] = job->databuf[base + 1];
rgb[0] = job->databuf[base + 2];
if (corrdata) {
if (rgb[0] == oldrgb[0] &&
rgb[1] == oldrgb[1] &&
rgb[2] == oldrgb[2]) {
rgb[0] = destrgb[0];
rgb[1] = destrgb[1];
rgb[2] = destrgb[2];
} else {
oldrgb[0] = rgb[0];
oldrgb[1] = rgb[1];
oldrgb[2] = rgb[2];
hiti_interp33_256(rgb, rgb, corrdata);
destrgb[0] = rgb[0];
destrgb[1] = rgb[1];
destrgb[2] = rgb[2];
}
}
/* Finally convert to YMC */
rowY[j] = 255 - rgb[2];
rowM[j] = 255 - rgb[1];
rowC[j] = 255 - rgb[0];
}
}
/* Nuke the old BGR buffer and replace it with YMC buffer */
free(job->databuf);
job->databuf = ymcbuf;
job->datalen = stride * 3 * job->hdr.cols;
if (corrdata)
free(corrdata);
}
// XXX YMC planar may need STRIDE correction!
*vjob = job;
return CUPS_BACKEND_OK;
}
static int calc_offset(int val, int mid, int max, int step)
{
if (val > max)
val = max;
else if (val < 0)
val = 0;
val -= mid;
val *= step;
return val;
}
static int hiti_main_loop(void *vctx, const void *vjob)
{
struct hiti_ctx *ctx = vctx;
int ret;
uint32_t err = 0;
uint8_t sts[3];
struct hiti_job jobid;
const struct hiti_printjob *job = vjob;
if (!ctx)
return CUPS_BACKEND_FAILED;
if (!job)
return CUPS_BACKEND_FAILED;
INFO("Waiting for printer idle\n");
do {
ret = hiti_query_status(ctx, sts, &err);
if (ret)
return ret;
/* If we have an error state, bail! */
if (err) {
ERROR("Printer reported alert: %08x (%s)\n",
err, hiti_errors(err));
return CUPS_BACKEND_STOP;
}
/* If we're able to accept jobs, proceed */
if (!(sts[0] & (STATUS0_POWERON|STATUS0_BUSY)))
break;
sleep(1);
} while(1);
dump_markers(&ctx->marker, 1, 0);
uint16_t resplen = 0;
uint16_t rows = job->hdr.rows;
uint16_t cols = ((4*job->hdr.cols) + 3) / 4;
// XXX these two only need to change if rows > 3000
uint16_t startLine = 0;
uint16_t numLines = rows;
uint32_t sent = 0;
/* Set up and send over Sublimation Format */
struct hiti_efd_sf sf;
sf.mediaType = job->hdr.code;
sf.cols_res = cpu_to_be16(job->hdr.col_dpi);
sf.rows_res = cpu_to_be16(job->hdr.row_dpi);
sf.cols = cpu_to_be16(job->hdr.cols);
sf.rows = cpu_to_be16(rows);
sf.rows_offset = calc_offset(ctx->calibration.vert, 5, 8, 4);
sf.cols_offset = calc_offset(ctx->calibration.horiz, 6, 11, 4);
sf.colorSeq = 0x87 + (job->hdr.overcoat ? 0xc0 : 0);
sf.copies = job->copies;
sf.printMode = 0x08 + (job->hdr.quality ? 0x02 : 0);
ret = hiti_docmd(ctx, CMD_EFD_SF, (uint8_t*) &sf, sizeof(sf), &resplen);
if (ret)
return CUPS_BACKEND_FAILED;
// XXX msg 8011 sent here..
/* XXX startjob returns actual jobid */
jobid.lun = 0;
jobid.jobid = cpu_to_be16(ctx->jobid);
resplen = sizeof(jobid);
ret = hiti_docmd_resp(ctx, CMD_JC_SJ, (uint8_t*) &jobid, sizeof(jobid),
(uint8_t*) &jobid, &resplen);
if (ret)
return CUPS_BACKEND_FAILED;
INFO("Printer returned Job ID %04x\n", be16_to_cpu(jobid.jobid));
if (ctx->conn->type == P_HITI_51X) {
ret = hiti_send_heat_data(ctx, job->hdr.quality, job->hdr.overcoat);
} else {
uint8_t chs[2] = { 0, 1 }; /* Fixed..? */
resplen = 0;
ret = hiti_docmd(ctx, CMD_EFD_CHS, chs, sizeof(chs), &resplen);
if (ret)
return CUPS_BACKEND_FAILED;
}
ret = hiti_docmd(ctx, CMD_EPC_SP, NULL, 0, &resplen);
if (ret)
return CUPS_BACKEND_FAILED;
// XXX send ESD_SHTPC w/ heat table. Unknown.
// CMD_ESD_SHPTC // Heating Parameters & Tone Curve (~7Kb, seen on windows..)
/* Send heat table data */
resend_y:
INFO("Sending yellow plane\n");
ret = hiti_docmd(ctx, CMD_EPC_SYP, NULL, 0, &resplen);
if (ret)
return CUPS_BACKEND_FAILED;
ret = hiti_sepd(ctx, rows * cols, startLine, numLines);
if (ret)
return CUPS_BACKEND_FAILED;
ret = send_data(ctx->conn, job->databuf + sent, rows * cols);
if (ret)
return CUPS_BACKEND_FAILED;
__usleep(200*1000);
sent += rows * cols;
ret = hiti_query_status(ctx, sts, &err);
if (ret)
return ret;
if (err) {
ERROR("Printer reported alert: %08x (%s)\n",
err, hiti_errors(err));
return CUPS_BACKEND_FAILED;
}
if (sts[0] & STATUS0_RESEND_DATA) {
WARNING("Printer requested resend\n");
goto resend_y;
}
resend_m:
INFO("Sending magenta plane\n");
ret = hiti_docmd(ctx, CMD_EPC_SMP, NULL, 0, &resplen);
if (ret)
return CUPS_BACKEND_FAILED;
ret = hiti_sepd(ctx, rows * cols, startLine, numLines);
if (ret)
return CUPS_BACKEND_FAILED;
ret = send_data(ctx->conn, job->databuf + sent, rows * cols);
if (ret)
return CUPS_BACKEND_FAILED;
sent += rows * cols;
__usleep(200*1000);
ret = hiti_query_status(ctx, sts, &err);
if (ret)
return ret;
if (err) {
ERROR("Printer reported alert: %08x (%s)\n",
err, hiti_errors(err));
return CUPS_BACKEND_FAILED;
}
if (sts[0] & STATUS0_RESEND_DATA) {
WARNING("Printer requested resend\n");
goto resend_m;
}
resend_c:
INFO("Sending cyan plane\n");
ret = hiti_docmd(ctx, CMD_EPC_SCP, NULL, 0, &resplen);
if (ret)
return CUPS_BACKEND_FAILED;
ret = hiti_sepd(ctx, rows * cols, startLine, numLines);
if (ret)
return CUPS_BACKEND_FAILED;
ret = send_data(ctx->conn, job->databuf + sent, rows * cols);
if (ret)
return CUPS_BACKEND_FAILED;
__usleep(200*1000);
sent += rows * cols;
ret = hiti_query_status(ctx, sts, &err);
if (ret)
return ret;
if (err) {
ERROR("Printer reported alert: %08x (%s)\n",
err, hiti_errors(err));
return CUPS_BACKEND_FAILED;
}
if (sts[0] & STATUS0_RESEND_DATA) {
WARNING("Printer requested resend\n");
goto resend_c;
}
INFO("Sending Print start\n");
ret = hiti_docmd(ctx, CMD_EPC_EP, NULL, 0, &resplen);
if (ret)
return CUPS_BACKEND_FAILED;
resplen = 3;
ret = hiti_docmd_resp(ctx, CMD_JC_EJ, (uint8_t*) &jobid, sizeof(jobid), (uint8_t*) &jobid, &resplen);
if (ret)
return CUPS_BACKEND_FAILED;
INFO("Waiting for printer acknowledgement\n");
do {
struct hiti_job_qqa qqa;
sleep(1);
ret = hiti_query_status(ctx, sts, &err);
if (ret)
return ret;
if (err) {
ERROR("Printer reported alert: %08x (%s)\n",
err, hiti_errors(err));
return CUPS_BACKEND_FAILED;
}
if (fast_return) {
INFO("Fast return mode enabled.\n");
break;
}
/* See if our job is done.. */
ret = hiti_query_job_qa(ctx, &jobid, &qqa);
if (ret)
return ret;
/* If our job is complete.. */
if (qqa.count == 0 || qqa.row[0].job.jobid == 0)
break;
} while(1);
INFO("Print complete\n");
return CUPS_BACKEND_OK;
}
static int hiti_cmdline_arg(void *vctx, int argc, char **argv)
{
struct hiti_ctx *ctx = vctx;
int i, j = 0;
if (!ctx)
return -1;
while ((i = getopt(argc, argv, GETOPT_LIST_GLOBAL "irRs")) >= 0) {
switch(i) {
GETOPT_PROCESS_GLOBAL
case 'i':
hiti_get_info(ctx);
break;
case 'r':
hiti_doreset(ctx, RESET_SOFT);
break;
case 'R':
hiti_doreset(ctx, RESET_PRINTER);
break;
case 's':
hiti_get_status(ctx);
break;
}
if (j) return j;
}
return CUPS_BACKEND_OK;
}
static void hiti_cmdline(void)
{
DEBUG("\t\t[ -i ] # Query printer information\n");
DEBUG("\t\t[ -r ] # Soft Reset printer\n");
DEBUG("\t\t[ -R ] # Reset printer\n");
DEBUG("\t\t[ -s ] # Query printer status\n");
}
static int hiti_query_version(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = 79;
uint8_t buf[256];
ret = hiti_docmd_resp(ctx, CMD_RDC_RS, NULL, 0, buf, &len);
if (ret)
return ret;
/* Copy strings */
strncpy(ctx->id, (char*) &buf[34], buf[33]);
strncpy(ctx->version, (char*) &buf[34 + buf[33] + 1], sizeof(ctx->version));
return CUPS_BACKEND_OK;
}
static int hiti_query_status(struct hiti_ctx *ctx, uint8_t *sts, uint32_t *err)
{
int ret;
uint16_t len = 3;
uint16_t cmd;
*err = 0;
ret = hiti_docmd_resp(ctx, CMD_RDS_RSS, NULL, 0, sts, &len);
if (ret)
return ret;
if (sts[2] & STATUS2_WARNING)
cmd = CMD_RDS_RW;
else if (sts[2] & STATUS2_DEVSERVICE)
cmd = CMD_RDS_DSRA;
else if (sts[2] & STATUS2_OPERATOR)
cmd = CMD_RDS_ROIRA;
else if (sts[1] & STATUS1_PAPERJAM)
cmd = CMD_RDS_RJA;
else if (sts[1] & STATUS1_INPUT)
cmd = CMD_RDS_RIA;
else if (sts[1] & STATUS1_SUPPLIES)
cmd = CMD_RDS_SA;
else
cmd = 0;
/* Query extended status, if needed */
if (cmd) {
uint8_t respbuf[17]; /* Enough for four errors */
len = sizeof(respbuf);
ret = hiti_docmd_resp(ctx, cmd, NULL, 0, respbuf, &len);
if (ret)
return ret;
if (!respbuf[0])
return CUPS_BACKEND_OK;
if (respbuf[0] > 1) {
WARNING("Multiple Alerts detected, only returning the first!\n");
} else if (len > 8) {
// XXX means we have ASCIIHEX in positions [5:8], convert to number..
// eg "30 31 30 30" == Code 0100
}
memcpy(err, &respbuf[1], sizeof(*err));
*err = be32_to_cpu(*err);
*err >>= 8;
}
return CUPS_BACKEND_OK;
}
static int hiti_query_summary(struct hiti_ctx *ctx, struct hiti_erdc_rs *rds)
{
int ret;
uint16_t len = sizeof(*rds);
ret = hiti_docmd_resp(ctx, CMD_ERDC_RS, NULL, 0, (uint8_t*)rds, &len);
if (ret)
return ret;
rds->stride = be16_to_cpu(rds->stride);
rds->dpi_cols = be16_to_cpu(rds->dpi_cols);
rds->dpi_rows = be16_to_cpu(rds->dpi_rows);
rds->cols = be16_to_cpu(rds->cols);
rds->rows = be16_to_cpu(rds->rows);
return CUPS_BACKEND_OK;
}
static int hiti_query_rpidm(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = sizeof(ctx->rpidm);
ret = hiti_docmd_resp(ctx, CMD_ERDC_RPIDM, NULL, 0, (uint8_t*)&ctx->rpidm, &len);
if (ret)
return ret;
ctx->rpidm.usb_pid = be16_to_cpu(ctx->rpidm.usb_pid);
return CUPS_BACKEND_OK;
}
static int hiti_query_hilightadj(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = sizeof(ctx->hilight_adj);
ret = hiti_docmd_resp(ctx, CMD_ERDC_RHA, NULL, 0, ctx->hilight_adj, &len);
if (ret)
return ret;
return CUPS_BACKEND_OK;
}
static int hiti_query_unk8010(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = sizeof(ctx->unk_8010);
ret = hiti_docmd_resp(ctx, CMD_ERDC_UNK, NULL, 0, ctx->unk_8010, &len);
if (ret)
return ret;
return CUPS_BACKEND_OK;
}
static int hiti_query_calibration(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = sizeof(ctx->calibration);
ret = hiti_docmd_resp(ctx, CMD_ERDC_RCC, NULL, 0, (uint8_t*)&ctx->calibration, &len);
if (ret)
return ret;
return CUPS_BACKEND_OK;
}
static int hiti_query_led_calibration(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = sizeof(ctx->led_calibration);
ret = hiti_docmd_resp(ctx, CMD_ERDC_RLC, NULL, 0, (uint8_t*)&ctx->led_calibration, &len);
if (ret)
return ret;
return CUPS_BACKEND_OK;
}
static int hiti_query_ribbonvendor(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = 2;
ret = hiti_docmd_resp(ctx, CMD_ERDC_RRVC, NULL, 0, (uint8_t*) &ctx->ribbonvendor, &len);
if (ret)
return ret;
ctx->ribbonvendor = be16_to_cpu(ctx->ribbonvendor);
return CUPS_BACKEND_OK;
}
static int hiti_query_tphv(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = 2;
ret = hiti_docmd_resp(ctx, CMD_ERDC_RTLV, NULL, 0, (uint8_t*) &ctx->rtlv, &len);
if (ret)
return ret;
return CUPS_BACKEND_OK;
}
static int hiti_query_supplies(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = 5;
uint8_t arg = 0;
ret = hiti_docmd_resp(ctx, CMD_RDS_RSUS, &arg, sizeof(arg), ctx->supplies, &len);
if (ret)
return ret;
len = 4;
ret = hiti_docmd_resp(ctx, CMD_RDS_RIS, &arg, sizeof(arg), ctx->supplies2, &len);
if (ret)
return ret;
return CUPS_BACKEND_OK;
}
static int hiti_query_statistics(struct hiti_ctx *ctx)
{
int ret;
uint16_t len = 30;
uint8_t buf[256];
int i;
ret = hiti_docmd_resp(ctx, CMD_RDS_RPS, NULL, 0, buf, &len);
if (ret)
return ret;
for (i = 0 ; i < buf[0] && i*5+1 < len ; i+= 5) {
/* uint8_t type
uint32_t val
*/
if (buf[1 + i*5] == 0x03) { // Remaining prints
memcpy(&ctx->media_remain, &buf[1 + i*5 + 1], sizeof(ctx->media_remain));
ctx->media_remain = be32_to_cpu(ctx->media_remain);
}
}
return CUPS_BACKEND_OK;
}
static int hiti_doreset(struct hiti_ctx *ctx, uint8_t type)
{
int ret;
uint8_t buf[6];
uint16_t len = 6;
ret = hiti_docmd_resp(ctx, CMD_PCC_RP, &type, sizeof(type), buf, &len);
if (ret)
return ret;
sleep(5);
return CUPS_BACKEND_OK;
}
static int hiti_query_matrix(struct hiti_ctx *ctx)
{
int ret;
int i;
uint16_t len = 1;
for (i = 0 ; i < 256 ; i++) {
uint16_t offset = cpu_to_be16(i);
ret = hiti_docmd_resp(ctx, CMD_EFM_RD, (uint8_t*)&offset, sizeof(offset), &ctx->matrix[i], &len);
if (ret)
return ret;
}
return CUPS_BACKEND_OK;
}
static int hiti_query_counter(struct hiti_ctx *ctx, uint8_t arg, uint32_t *resp, int num)
{
int ret;
uint16_t len = sizeof(*resp) * num;
ret = hiti_docmd_resp(ctx, CMD_ERDC_RPC, &arg, sizeof(arg),
(uint8_t*) resp, &len);
if (ret)
return ret;
*resp = be32_to_cpu(*resp);
return CUPS_BACKEND_OK;
}
static int hiti_query_serno(struct dyesub_connection *conn, char *buf, int buf_len)
{
int ret;
uint16_t rsplen = 18;
uint8_t rspbuf[18];
struct hiti_ctx ctx = {
.conn = conn
};
uint8_t arg = sizeof(rspbuf);
ret = hiti_docmd_resp(&ctx, CMD_ERDC_RSN, &arg, sizeof(arg), rspbuf, &rsplen);
if (ret)
return ret;
/* Copy over serial number */
strncpy(buf, (char*)rspbuf, buf_len);
return CUPS_BACKEND_OK;
}
static int hiti_query_markers(void *vctx, struct marker **markers, int *count)
{
struct hiti_ctx *ctx = vctx;
int ret;
if (markers)
*markers = &ctx->marker;
if (count)
*count = 1;
ret = hiti_query_statistics(ctx);
if (ret)
return ret;
ctx->marker.levelnow = ctx->media_remain;
return CUPS_BACKEND_OK;
}
static int hiti_query_stats(void *vctx, struct printerstats *stats)
{
struct hiti_ctx *ctx = vctx;
uint8_t sts[3];
uint32_t err = 0;
uint32_t tmp[2] = {0, 0}; /* Second only used for P51x */
/* Update marker info */
if (hiti_query_markers(ctx, NULL, NULL))
return CUPS_BACKEND_FAILED;
if (hiti_query_status(ctx, sts, &err))
return CUPS_BACKEND_FAILED;
stats->mfg = "HiTi";
stats->model = ctx->id;
stats->serial = ctx->serno;
stats->fwver = ctx->version;
stats->decks = 1;
stats->mediatype[0] = ctx->marker.name;
stats->levelmax[0] = ctx->marker.levelmax;
stats->levelnow[0] = ctx->marker.levelnow;
stats->name[0] = "Roll";
stats->cnt_life[0] = 0;
if (hiti_query_counter(ctx, 1, tmp, ctx->erdc_rpc_len))
return CUPS_BACKEND_FAILED;
stats->cnt_life[0] += tmp[0];
if (err)
stats->status[0] = strdup(hiti_errors(err));
else
stats->status[0] = strdup(hiti_status(sts));
return CUPS_BACKEND_OK;
}
static const char *hiti_prefixes[] = {
"hiti", // Family name
"hiti-p52x", /* Just in case */
NULL
};
const struct dyesub_backend hiti_backend = {
.name = "HiTi Photo Printers",
.version = "0.32",
.uri_prefixes = hiti_prefixes,
.cmdline_usage = hiti_cmdline,
.cmdline_arg = hiti_cmdline_arg,
.init = hiti_init,
.attach = hiti_attach,
.cleanup_job = hiti_cleanup_job,
.read_parse = hiti_read_parse,
.main_loop = hiti_main_loop,
.query_serno = hiti_query_serno,
.query_markers = hiti_query_markers,
.query_stats = hiti_query_stats,
.devices = {
{ 0x0d16, 0x0309, P_HITI_CS2XX, NULL, "hiti-cs200e"},
{ 0x0d16, 0x030a, P_HITI_CS2XX, NULL, "hiti-cs220e"},
{ 0x0d16, 0x030b, P_HITI_CS2XX, NULL, "hiti-cs230e"},
{ 0x0d16, 0x030c, P_HITI_CS2XX, NULL, "hiti-cs250e"},
{ 0x0d16, 0x030d, P_HITI_CS2XX, NULL, "hiti-cs290e"},
{ 0x0d16, 0x0007, P_HITI_51X, NULL, "hiti-p510k"},
{ 0x0d16, 0x000b, P_HITI_51X, NULL, "hiti-p510l"},
{ 0x0d16, 0x000d, P_HITI_51X, NULL, "hiti-p518a"},
{ 0x0d16, 0x010e, P_HITI_51X, NULL, "hiti-p510s"},
{ 0x0d16, 0x0111, P_HITI_51X, NULL, "hiti-p510si"},
{ 0x0d16, 0x0112, P_HITI_51X, NULL, "hiti-p518s"},
{ 0x0d16, 0x0502, P_HITI_52X, NULL, "hiti-p520l"},
{ 0x0d16, 0x0502, P_HITI_52X, NULL, "hiti-p525l"}, /* Duplicate */
{ 0x0d16, 0x0009, P_HITI_720, NULL, "hiti-p720l"},
{ 0x0d16, 0x000a, P_HITI_720, NULL, "hiti-p728l"},
{ 0x0d16, 0x0501, P_HITI_750, NULL, "hiti-p750l"},
{ 0, 0, 0, NULL, NULL}
}
};
/*
#define USB_PID_HITI_P530 0x000F
#define USB_PID_HITI_P110S 0x0110
#define USB_PID_HITI_P310L 0x0503
#define USB_PID_HITI_P310W 0x050A
#define USB_PID_HITI_X610 0x0800
*/
/* TODO:
- Figure out 5x6, 6x5, and 6x6 prints (need 6x8 or 6x9 media!)
- Confirm 6x2" print dimensions (windows?)
- Confirm 5" media and sizes work properly
- Figure out stats/counters for non-4x6 sizes
- Job control (QJC, RSJ) -- and canceling?
- Set highlight adjustment & H/V alignment from cmdline
* Figure out how to set H/V alignment!
- Figure out if driver needs to consume highlight adjustment
* Feed into gamma correction?
* Feed [un]modified into some printer cmd?
- Figure out Windows spool format (probably never)
- GP Spool parsing improvements
* Add additional 'reserved' fields for future use?
* Fix row stride for YMC planar format (in case we get non-*4 column counts)
- Job combining!
* 4x6 -> 8x6 (0->9) 1844 x 1240 -> 2434 (delta -46)
* 3.5x5 -> 5x7 (8->11) 1548 x 1072 -> 2140 (delta -4)
- Further performance optimizations in color conversion code
* Rework to take advantage of auto-vectorization?
* Pre-compute then cache entire map on disk?
* Use external "Cube LUT" implementation?
- Commands 8008, 8011, EST_SEHT, ESD_SHTPC, RDC_ROC, PCC_STP, CMD_EDM_*
- Test with P525, P720, P750
- Further investigation into P110 series
- Start research into P530D, X610
- Incorporate changes for CS-series card printers
- More "Matrix table" decoding work
- Investigate Suspicion that HiTi keeps tweaking LUTs and/or Heat tables
- Pull in heat tables & LUTs from windows drivers
*/