selphy_print/lib70x

   LibMitsuD70ImageReProcess -- Re-implemented image processing library for
                                the Mitsubishi CP-D70 family of printers

   Copyright (c) 2016-2021 Solomon Peachy <pizza@shaftnet.org>

   ** ** ** ** Do NOT contact Mitsubishi about this library! ** ** ** **

   This library is a platform-independent reimplementation of the image
   processing algorithms that are necessary to utilize the Mitsubishi
   CP-D70, CP-M1, CP9800, and CP30 families of printers.

   Mitsubishi was *NOT* involved in the creation of this library, and is
   not responsible in any way for the library or any deficiencies in its
   output.  They will provide no support if it is used.

   However, without this library, it is nearly impossible to utilize the 
   the above families of printers under Linux and similar operating 
   systems.

   The following printers are known to utilize this library:

     * Mitsubishi CP-D70DW
     * Mitsubishi CP-D707DW
     * Mitsubishi CP-K60DW-S
     * Mitsubishi CP-D80DW
     * Mitsubishi CP-M1
     * Mitsubishi CP-M15
     * Mitsubishi CP30DW
     * Mitsubishi CP9800DW    [*1]
     * Mitsubishi CP9810DW    [*1]
     * Mitsubishi CP9820DW-S  [*1]
     * Kodak 305
     * Fujifilm ASK-300
     * Fujifilm ASK-500       [*2]

   [*1] The CP98xx family is expected to function, but likely has
        bugs affecting the output quality.
   [*2] The ASK500 is expected to function but has not been tested.

   ** ** ** **

   This library is released under the GNU GPL version 3.  Unfortunately
   this means that it cannot be bundled with Gutenprint.

   In order to utilize this library with Gutenprint, you will need:

	* Gutenprint 5.2.12-pre4 or newer
	* Current selphy_print backend
	* This library

   To build this library:

	make
	make install

    You may also need to add the library to the search path:

	echo "/usr/local/lib" >> /etc/ld.so.conf
	ldconfig