Gutenprint + CUPS backends for Dye Sublimation printers
Go to file
Solomon Peachy db0c7d8b99 all: Eliminate the multi-stage cmdline parsing.
Unfortunately this means we lose the '-B backend' method, but the
overall control flow is much, much simpler now.
2015-08-13 21:09:56 -04:00
icm shinko6145: Add a preliminary backend. Does NOT include library work. 2015-07-26 23:05:21 -04:00
misc-patches Get rid of a bad chunk in the multicut patch. 2015-06-25 20:12:54 -04:00
testjobs Fix the 2x6 testjob. 2015-01-21 19:04:00 -05:00
.gitattributes Initial commit of current sources. 2012-10-26 22:06:47 -04:00
.gitignore shinko6145: Add a preliminary backend. Does NOT include library work. 2015-07-26 23:05:21 -04:00
COPYING [misc] Add GPLv3 license text. 2012-10-26 23:41:11 -04:00
Makefile shinko6145: Add a preliminary backend. Does NOT include library work. 2015-07-26 23:05:21 -04:00
README all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_canonselphy.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_citizencw01.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_common.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_common.h all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_dnpds40.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_kodak605.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_kodak1400.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_kodak6800.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_mitsu70x.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_mitsu9550.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_shinkos1245.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_shinkos2145.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_shinkos6145.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_shinkos6245.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
backend_sonyupdr150.c all: Eliminate the multi-stage cmdline parsing. 2015-08-13 21:09:56 -04:00
blacklist Update blacklist. 2015-06-23 00:03:04 -04:00

README

 ***************************************************************************

  Unified Gutenprint/CUPS backend for various Dye-Sublimation photo printers

  Copyright (c) 2007-2015 Solomon Peachy <pizza@shaftnet.org>

  This free software comes with ABSOLUTELY NO WARRANTY! 
  Licensed under the GNU GPL, see the 'COPYING' file for more details.

  The latest version can be found at
  
    http://git.shaftnet.org/cgit/selphy_print.git

  For a list of known bugs and development plans, see:

    http://bugs.shaftnet.org/index.php?project=4

 ***************************************************************************

  If you do not have one of the printers listed below, this backend is
  not relevant for you and you can just ignore all of this.

  Supported Printers:

   Canon SELPHY ES series
   Canon SELPHY CP series (except CP820, and CP910)
   Kodak Professional 1400
   Kodak 605 Photo Printer
   Kodak 805 Photo Printer
   Kodak 6800 Photo Printer
   Kodak 6850 Photo Printer
   Shinko CHC-S2145 (aka "Sinfonia S2")
   Sony UP-DR150
   Sony UP-DR200
   DNP DS40/DS80/DS-RX1/DS620
   Citizen CX/CX-W/CY
   Citizen CW-01
   Mitsubishi CP-9550D/DW/DW-S/DZ/DZ-S
   Mitsubishi CP-3800DW

  Work-in-progress Printers:

   Mitsubishi CP-D70DW, CP-D707DW, CP-K60DW-S, and CP-D80DW
   Kodak 305
   Citizen CW-02, and CX2
   Olmec OP900/OP900II
   ICI Imagedata OP900
   Sony UP-CR10L (aka DNP DS-SL10)
   Shinko CHC-S1245 (aka Sinfonia E1)
   Shinko CHC-S6245 (aka Sinfonia CE1)
   Shinko CHC-S6145 (aka Sinfonia CS2)
   Shinko CHC-S6145-5A (aka Sinfonia CS2-c)
   Ciaat Brava 21 (Rebadged S6145)

 ***************************************************************************

  This intelligent backend is needed to utilize many common dye-sublimation
  photo printers under Linux, OSX, and other UNIX-like operating systems.

  Although these printers advertise themselves as standard USB Printer Class
  devices, they do not actually obey those specifications and require 
  special two-way handshaking in order to successfully print.

  This backend can only be used in conjunction with Gutenprint 5.2.10 or
  newer.  Please see the Gutenprint README file (section II D) for more
  information on  use of this backend and integration into CUPS.
  
  Although this backend is bundled with Gutenprint, this repository is 
  considered the canonical upstream source where all development occurs.
  As such, when compared to the current Gutenprint release, the code found 
  here is often newer, with additional features or device support.  At the
  same time, it may have half-developed features that don't quite work, 
  with giant bugs that come out at midnight to eat your cat.

  On that note, please keep in mind that this software distributed
  in the hope that it will be useful, but WITHOUT ANY WARRANTY WHATSOEVER.

 ***************************************************************************

  This backend also supports a "standalone" mode that performs various 
  utility functions for selected printers, such as querying status and
  configuring various parameters. The exact commands supported for each
  printer are documented below.

 ***************************************************************************
  Compilation:

     This tool requires libusb 1.0 to build.  We highly recommend 
     v1.0.16 or newer due to general stability improvements. Versions
     older than 1.0.10 will require -DLIBUSB_PRE_1_0_10 to be defined 
     (see the Makefile).

     To further complicate things, libusb-1.0 had a temporary fork called
     libusbx, but that was merged back into libusb as of v1.0.18.  
     Consequently, your distribution package for libusb-1.0 may be 
     called libusbx instead.

     Fedora/RedHat:
	yum install libusbx-devel libusb1-devel
     Debian/Ubuntu
	apt-get install libusbx-dev libusb-1.0-0-dev

   And all you need to do after that is type 'make'

 ***************************************************************************
  CUPS backend usage:

   DEVICE_URI=someuri \
       gutenprint52+usb job-id user title num-copies options [ filename ]

 ***************************************************************************
  Standalone usage:

    This backend is set up as a multi-call executable; that is to say
    behaivor changes based on the name used to invoke the executable.
    When compiled, a set of symlinks are created, corresponding to each
    of the internal backends.  Alternatively you may set the BACKEND
    environment variable to force a specific backend to be used.  These
    commands are equivalent:

         BACKEND=backend gutenprint52+usb [ arguments ]
 	 backend [ arguments ]

     All backends support the following invocations:

        backend [ arguments ]
  	backend [ arguments ] filename
	backend [ arguments ] - < filename
	somecommand | backend [ arguments ] -

      The 'filename' here refers to the raw spool data generated by
      Gutenprint (eg via its gimp plugin) or the Windows print-to-file 
      output.

      All global arguments:

      	   -D                 Increment debug level                      [1]
	   -G                 Display GPL text
	   -f                 Enable fast return mode if possible        [2]
	   -S serno           Use SerialNum 'serno'                      [3]
	   -V extra_vid                                                  [4]
	   -P extra_pid                                                  [4]
	   -T extra_type                                                 [4]
	   -d numcopies       Print 'numcopies' of the supplied job

       [1]  This argument can be repeated to increase the debug level.
            Alternatively, the 'DYESUB_DEBUG' environment variable can be
	    used.

       [2]  This terminates the backend as soon as the printer has
            acknowledged the print job, without waiting for the print job
	    to complete.  This can also be enabled by setting the
	    'FAST_RETURN' environment variable.  This is the default behavior
	    when using this backend with CUPS.  Not all backends support
	    fast return.

       [3]  If you have multiple models of the same printer family connected
            simultaneously, the backend will choose the first one it finds.
	    If you wish to target a specific device, you may specify its
	    serial number with this switch, or using the 'SERIAL' environment
	    variable.  For example, these are equivalent:

	      	  SERIAL=N782 backend filename [ arguments ]
		  backend -S N782 filename [ arguments ]

       [4]  All backends support an additional operational mode, to test out
            unknown models. To use this mode, specify the VID, PID and its
	    internal device type as arguments or environment variables:

	     	  EXTRA_VID=04a9 EXTRA_PID=3ab1 EXTRA_TYPE=7 backend filename
		  backend -V 04a9 -P 3ab1 -T 7 filename

	    The VID and PID are specified in hexidecimal, and the TYPE is 
            the P_XXX enumeration defined in backend_common.h. The '7' in this
            example corresponds to most Canon SELPHY CP models, and is what you
            would use if you were trying to get the backend to detect an
            otherwise unrecognized SELPHY CP model.

            If you are able to successfuly print using this technique,
	    please let us know so we can add the apppriate entry to the
	    internal database.

      Finally, some backends support additional arguments; see below:

 *************************************************************************** 
  BACKEND=canonselphy

   Verified supported printers:
  
     ES1, ES2, ES3, ES30, ES40, CP-10, CP-100, CP-200, CP-300, CP-330, 
     CP400, CP500, CP510, CP710, CP720, CP730, CP740, CP750, CP760, CP770, 
     CP780, CP790, CP800, CP900

   Unverified/untested, but should work:  (let us know, please!)

     ES20, CP-220, CP520, CP530, CP600, CP810

   NOT supported:  (Printer does not need a backend)

     CP820, CP910

   This backend does not support additional commands.

 *************************************************************************** 
  BACKEND=kodak1400

   Verified supported printers:

     Kodak 1400
     Kodak 805

   Valid commands:

     -C filename        Set tone curve [1]

  Notes:

    [1]  Format of curvedata file:

    	 256 entries each of Yellow, Magenta, Cyan mappings:
	 Values are unsigned 16-bit big endian, between 0 and ???
	 (unsure as to the bit usage)

 *************************************************************************** 
  BACKEND=kodak6800

   Verified supported printers:

     Kodak 6800
     Kodak 6850

   Development was sponsored by:

        LiveLink Technology [ www.livelinktechnology.net ]

   Valid commands:

     -c filename        Query tone curve [1]
     -C filename        Set tone curve   [1]
     -m                 Query supported media
     -s                 Query printer status (not fully decoded)

  Notes:

    [1]  Format of curvedata file:

    	 256 entries each of Yellow, Magenta, Cyan mappings:
	 Values are unsigned 16-bit big endian, between 0 and 16383
	 (ie 14-bit)

 *************************************************************************** 
  BACKEND=kodak605

   Verified supported printers:

     Kodak 605

   Valid commands:

     -C filename        Set tone curve   [1]
     -m                 Query supported media (not fully decoded)
     -s                 Query printer status (not fully decoded)

  Notes:

    [1]  Format of curvedata file:

    	 256 entries each of Yellow, Magenta, Cyan mappings:
	 Values are unsigned 16-bit big endian, between 0 and ???
	 (unsure as to the bit usage)

 *************************************************************************** 
  BACKEND=shinkos2145

   Verified supported printers:

     Shinko CHC-S2145 (aka "Sinfonia S2")

   Development was initially sponsored by:

        LiveLink Technology [ www.livelinktechnology.net ]

   In order to use this backend, you will need to ensure the printer is
   configured to use the 'DRV' (as opposed to 'DLL') operating mode.  See 
   the printer documentation for details on how to set this.

   Valid commands:

     -b [ 0 | 1 ]       Disable or Enable the printer control panel.
     -c filename        Query User tone curve from flash        [1]
     -C filename        Store User tone curve in flash          [1]
     -e                 Query Error log
     -F                 Flash printer LEDs for 5 seconds
     -i                 Query printer firmware information
     -l filename        Query Current tone curve from RAM       [1]
     -L filename        Store Current tone curve in RAM         [1]
     -m                 Query media information
     -r                 Reset User tone curve to default        [4]
     -R                 Reset printer to factory defaults
     -s                 Query printer status
     -u                 Query user string
     -U somestring      Set user string to 'somestring'
     -X id              Cancel print job 'id'                    [3]

  Notes:

    [1]  Format of curvedata file:

	 256 entries each of Yellow, Magenta, Cyan mappings:
	 Values are unsigned 16-bit big endian, between 0 and 2047 
	 (ie only 11 bits used)

    [3]  Job ID is the Internal Job ID (reported via status)
    	   This cancels a multi-copy print job.
	   To see which jobs are active/pending, see the output of the
	   '-s' command, specifically the 'Bank' output.

    [4]  Default printer tone curve is a linear 'val << 3'

 *************************************************************************** 
  BACKEND=shinkos1245

   Low-level documentation was provided by Sinfonia, Inc.  Thank you!

   Work-in-process printers:

     Shinko CHC-S1245 (aka "Sinfonia E1")

   Valid commands:

     -s                 Query printer status
     -m                 Query media information
     -u                 Query user string
     -U somestring      Set user string to 'somestring'
     -X id              Cancel print job 'id'                   [1]
     -F                 Tone curve commands affect FINE table
     -c filename        Query User tone curve from flash        [2]
     -C filename        Store User tone curve in flash          [2]
     -l filename        Query Current tone curve from RAM       [2]
     -L filename        Store Current tone curve in RAM         [2]

    [1]  Job ID is the Internal Job ID (reported via status)
    	   This cancels a multi-copy print job.
	   To see which jobs are active/pending, see the output of the
	   '-s' command, specifically the 'Bank' output.

    [2]  Format of tone curve file:

	 256 entries each of Yellow, Magenta, Cyan mappings:
	 Values are unsigned 16-bit big endian, between 0 and 16383
	 (ie only 14 bits used)

 *************************************************************************** 
  BACKEND=shinkos6145

   Low-level documentation was provided by Sinfonia, Inc.  Thank you!

   Work-in-process printers:

     Shinko CHC-S6145 (aka "Sinfonia CE1")

	***VERY IMPORTANT***  This backend does NOT work -- At the moment, 
	a proprietary binary-only library is necessary to convert the input
	8bpp YMC data to the 16bpp YMCO data the printer needs.  This 
	library is only available for x86 and x86_64 targets, 
	and I do not have permission to redistribute it.

   Valid commands:

     -c filename        Query User tone curve from flash        [1]
     -C filename        Store User tone curve in flash          [1]
     -e                 Query Error log
     -F                 Flash printer LEDs for 5 seconds
     -i                 Query printer firmware information
     -k num		Specify standby delay (5-240 minutes)
     -l filename        Query Current tone curve from RAM       [1]
     -L filename        Store Current tone curve in RAM         [1]
     -m                 Query media information
     -r                 Reset User tone curve to default        [3]
     -R                 Reset printer to factory defaults
     -s                 Query printer status
     -X id              Cancel print job 'id'                   [2]

  Notes:

    [1]  Format of curvedata file:

	 256 entries each of Yellow, Magenta, Cyan mappings:
	 Values are unsigned 16-bit big endian, between 0 and 2047 
	 (ie only 11 bits used)

    [2]  Job ID is the Internal Job ID (reported via status)
    	   This cancels a multi-copy print job.
	   To see which jobs are active/pending, see the output of the
	   '-s' command, specifically the 'Bank' output.

    [3]  Default printer tone curve is a linear 'val << 3'

 *************************************************************************** 
  BACKEND=shinkos6245

   Low-level documentation was provided by Sinfonia, Inc.  Thank you!

   Work-in-process printers:

     Shinko CHC-S6245 (aka "Sinfonia CE1")

   Valid commands:

     -c filename        Query User tone curve from flash        [1]
     -C filename        Store User tone curve in flash          [1]
     -e                 Query Error log
     -F                 Flash printer LEDs for 5 seconds
     -i                 Query printer firmware information
     -k num		Specify standby delay (5-240 minutes)
     -l filename        Query Current tone curve from RAM       [1]
     -L filename        Store Current tone curve in RAM         [1]
     -m                 Query media information
     -r                 Reset User tone curve to default        [3]
     -R                 Reset printer to factory defaults
     -s                 Query printer status
     -X id              Cancel print job 'id'                   [2]

  Notes:

    [1]  Format of curvedata file:

	 256 entries each of Yellow, Magenta, Cyan mappings:
	 Values are unsigned 16-bit big endian, between 0 and 2047 
	 (ie only 11 bits used)

    [2]  Job ID is the Internal Job ID (reported via status)
    	   This cancels a multi-copy print job.
	   To see which jobs are active/pending, see the output of the
	   '-s' command, specifically the 'Bank' output.

    [3]  Default printer tone curve is a linear 'val << 3'

 *************************************************************************** 
  BACKEND=sonyupdr150

   Verified supported printers:

    Sony UP-DR150
    Sony UP-DR200

  Unverified/untested, but should work:  (Need USB PIDs)
   
   Sony UP-CR10L
   DNP DS-SL10

  This backend does not support additional commands.

 *************************************************************************** 
  BACKEND=mitsu70x

   Supported and tested printers:

    Mitsubishi CP-D70DW
    Mitsubishi CP-D707DW

   Work-in-progress printers (bugs):

    Mitsubishi CP-K60DW-S
    Kodak 305

   Unsupported printers (Unknown VID/PID):

    Mitsubishi CP-D80DW

   Valid commands:

     -s                 Query printer status (Only partially decoded)

 *************************************************************************** 
  BACKEND=mitsu9550

   Supported and tested printers:

    Mitsubishi CP-9550DZ/DZS/DW-S

   Work-in-progress printers:

    Mitsubishi CP-9550D/DW

   Valid commands:

     -s                 Query printer status
     -m                 Query printer media

 *************************************************************************** 
  BACKEND=dnpds40

   Verified supported printers:

    DNP DS40
    DNP DS80
    DNP DS-RX1
    DNP DS620
    Citizen CX
    Citizen CX-W
    Citizen CY

   Theoretically supported printers:  (Untested)

    Mitsubishi CP-3800DW
 
   Work-in-progress printers: (USB PIDs unknown)

    Citizen CW-02/OP900II
    Citizen CX2 (?)
    DNP DS80DX

   Development was initially sponsored by:

        Marco Di Antonio
        LiveLink Technology [ www.livelinktechnology.net ]

   This backend supports additional commands:

      dnpds40 [command [arg] ]

   Valid commands:

     -i                 Query printer information (resolution, etc)
     -I                 Query printer sensor information
     -n                 Query printer counters
     -N [ A | B | M ]   Reset Counter A/B/M                                 [2]
     -p num             Set 'P' counter to 'num'
     -s                 Query printer status
     -k num		Specify standby delay (1-99 minutes, 0 disables)    [1]
     -K num		Keep Media Status Across Power Cycles (1 yes, 0 no) [1]
     -x num             Set USB iSerialNumber reporting (1 yes, 0 no)       [1]

   Notes:

     [1] Only supported by DNP-DS620
     [2] Certain printer features may require updating the printer firmware

 *************************************************************************** 
  BACKEND=citizencw01

   Verified supported printers:

    Citizen CW-01

   Work-in-progress printers: (USB PIDs unknown)

    Olmec OP900
    ICI Imagedata OP900

   This backend supports additional commands:

      cw01 [command [arg] ]

   Valid commands:

     -i                 Query printer information (resolution, etc)
     -n                 Query printer counters
     -s                 Query printer status
     -N [ A | B ]       Reset Counter A/B

 ***************************************************************************